juhosg 746f915308 ramips: Add swconfig support to ramips_esw.c ... Add swconfig support to ramips_esw.c This patch adds swconfig support for ramips_esw: Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external rtl8366rb on internal port 5). I've made sure that in the enable_vlan=0 case it behaves like a dumb switch, so external switches should work fine with vlans and verified this on the WL-351. The current state shown by swconfig is always read directly from HW registers, new settings only show after 'swconfig dev rt305x set apply'. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33299 3c298f89-4303-0410-b956-a3cf2f4a3e73		2012-08-29 10:37:36 +00:00
..
imagebuilder	[target] derive system from hostcc to allow building inside a chroot	2012-08-22 15:07:32 +00:00
linux	ramips: Add swconfig support to ramips_esw.c	2012-08-29 10:37:36 +00:00
sdk	[target] derive system from hostcc to allow building inside a chroot	2012-08-22 15:07:32 +00:00
toolchain	[target] derive system from hostcc to allow building inside a chroot	2012-08-22 15:07:32 +00:00
Config.in	target: add a feature flag for RTC support	2012-05-17 15:28:09 +00:00
Makefile	target: do not make target/*/install depend on target/*/compile - removes one redundant kernel build dir call on target/install	2012-06-06 17:24:05 +00:00