mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-23 01:44:42 +02:00
768662b701
This introduces beacon_int and basic_rate (per wifi-device), and dtim_period and max_listen_int (per wifi-iface) for mac80211. These configure the beacon interval, basic rate specification, DTIM period (one DTIM per this many beacon frames), and maximum listen interval that a STA will be permitted to associate with. All of the new settings are optional; if they're absent, the existing hostapd (or, in the case of basic_rate, driver) defaults will be used. The existing bintval property only used for type adhoc is moved from wifi-iface to wifi-device, and is renamed to beacon_interval because bintval isn't a great name. The beacon interval is property of the wifi-device; while the choice between wifi-device and wifi-iface may not be relevant with an adhoc network, there's no reason to configure the same property one way for type adhoc and another for type ap. This change isn't expected to cause many problems, as bintval was added recently, in r25111. Similarly, the list of basic rates, also added for type adhoc in r25111, is a property of the device and not the interface. Further, it ought to be represented in UCI as a list, not a string dependent on the format that iw uses. I’ve moved it onto the device, renamed it to basic_rate, and made it configurable for APs via hostapd. Finally, I adapted it to use the same kb/s representation as mcast_rate; there's precedent for this format in that it's also how madwifi interprets mcast_rate. Neither bintval nor basicrates were ever documented in the UCI wireless configuration page on the wiki. When this change is committed, I'll update the documentation as needed. Signed-off-by: Mark Mentovai <mark@moxienet.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25837 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org