mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-14 13:21:56 +02:00
76e5e7f14f
Hostapd can allow preauthentication for WPA2-EAP networks when the interfaces through which preauthentication is allowed are configured. Add a new param "rsn_preauth=0/1" to the configuration that enables or disables preauthentication on the according bridge interface. Preauthentication for unbridged networks is not considered in this patch. Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24721 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org