mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-17 15:14:44 +02:00
7733d536b3
Since 2.6.38 the bridge module has a dependency to IPv6 if IPv6 is enabled. Since the IPv6 module isn't exactly lightweight and bridge also only needs a single function from IPv6, it's rather easy to create a common "lib" module with a RCU pointer to the actual implementation, if the IPv6 module is loaded (although slightly hackish). The codepath seems to be only taken when using IPv6, so there should be no negative side effects when IPv6 isn't loaded. I did not measure how big the performance impact is. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27237 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org