.. |
ar71xx.c
|
ar71xx: add ar71xx_device_reset_rmw helper
|
2011-09-21 11:47:50 +00:00 |
dev-ap91-pci.c
|
ar71xx: add helper function to setup LED pin and GPIO on the AP91 based boards
|
2010-12-14 18:01:00 +00:00 |
dev-ap91-pci.h
|
ar71xx: fix build error w/o CONFIG_PCI
|
2011-04-12 13:14:56 +00:00 |
dev-ap94-pci.c
|
ar71xx: add helper function to setup ath9k LED/GPIO on the AP94 based boards
|
2010-12-17 17:10:19 +00:00 |
dev-ap94-pci.h
|
ar71xx: remove stray semicolons
|
2010-12-17 17:57:20 +00:00 |
dev-ar9xxx-wmac.c
|
ar71xx: init external_reset for AR933X
|
2011-06-01 13:12:30 +00:00 |
dev-ar9xxx-wmac.h
|
ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac
|
2011-04-11 17:37:08 +00:00 |
dev-db120-pci.c
|
ar71xx: add DB120 board specific PCI initialization
|
2011-04-07 20:53:41 +00:00 |
dev-db120-pci.h
|
ar71xx: add DB120 board specific PCI initialization
|
2011-04-07 20:53:41 +00:00 |
dev-dsa.c
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
dev-dsa.h
|
ar71xx: move dsa switch device support into a separate file
|
2009-12-26 14:19:26 +00:00 |
dev-gpio-buttons.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
dev-gpio-buttons.h
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
dev-leds-gpio.c
|
ar71xx: fix 2.6.34 build errors
|
2010-06-07 09:18:13 +00:00 |
dev-leds-gpio.h
|
ar71xx: move leds-gpio device support into a spearate file
|
2009-12-26 14:18:54 +00:00 |
dev-m25p80.c
|
ar71xx: add common m25p80 device
|
2009-12-18 12:56:55 +00:00 |
dev-m25p80.h
|
ar71xx: add common m25p80 device
|
2009-12-18 12:56:55 +00:00 |
dev-pb9x-pci.c
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
dev-pb9x-pci.h
|
ar71xx: add basic kernel support for pb92
|
2010-03-26 22:35:52 +00:00 |
dev-pb42-pci.c
|
ar71xx: move PB42 specific PCI init code into a separate file
|
2009-12-25 13:09:04 +00:00 |
dev-pb42-pci.h
|
ar71xx: move PB42 specific PCI init code into a separate file
|
2009-12-25 13:09:04 +00:00 |
dev-usb.c
|
ar71xx: add AR933x specific USB setup function
|
2011-09-21 11:47:51 +00:00 |
dev-usb.h
|
ar71xx: move USB host device support into a separate file
|
2009-12-26 14:19:13 +00:00 |
devices.c
|
ar71xx: fix ethernet PLL setting on ar7242
|
2011-08-29 21:23:46 +00:00 |
devices.h
|
ar71xx: change mac address initialization
|
2010-08-18 16:00:28 +00:00 |
early_printk.c
|
ar71xx: update early_printk code
|
2011-06-13 08:12:38 +00:00 |
gpio.c
|
ar71xx: enable GPIO support for the AR933x SoCs
|
2011-05-31 22:53:30 +00:00 |
irq.c
|
ar71xx: do not count normal interrupts as spurious (fixes #10037)
|
2011-09-06 05:38:23 +00:00 |
Kconfig
|
ar71xx: add initial support for the OpenMesh OM2P board
|
2011-10-27 07:54:51 +00:00 |
mach-all0258n.c
|
ar71xx/all0258n: fix partition layout
|
2011-10-27 07:54:47 +00:00 |
mach-ap81.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-ap83.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-ap96.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-ap121.c
|
ar71xx: add support for the AP121/AP121-MINI reference boards
|
2011-05-31 22:53:43 +00:00 |
mach-aw-nr580.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-db120.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-dir-600-a1.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-dir-615-c1.c
|
ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922)
|
2011-08-11 13:52:40 +00:00 |
mach-dir-825-b1.c
|
ar71xx: fix MAC addresses on the DIR-825-B1 board
|
2011-09-23 19:56:39 +00:00 |
mach-eap7660d.c
|
ar71xx: fix build error w/o CONFIG_PCI
|
2011-04-12 13:14:56 +00:00 |
mach-ja76pf.c
|
ar71xx: populate LED3 on the JA76PF board
|
2011-05-08 21:38:51 +00:00 |
mach-jwap003.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-mzk-w04nu.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-mzk-w300nh.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-nbg460n.c
|
rtl8366: unify rtl8366s and rtl8366rb platform data
|
2011-07-24 14:40:23 +00:00 |
mach-om2p.c
|
ar71xx: add initial support for the OpenMesh OM2P board
|
2011-10-27 07:54:51 +00:00 |
mach-pb42.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-pb44.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-pb92.c
|
ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config
|
2011-04-28 21:27:42 +00:00 |
mach-rb4xx.c
|
linux: ar71xx: add support for Mikrotik Routerboard RB493G
|
2011-10-11 23:05:16 +00:00 |
mach-rb750.c
|
ar71xx: enable access to the WAN port PHY on a few devices, adds WAN link detection
|
2011-04-02 00:47:33 +00:00 |
mach-tew-632brp.c
|
ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922)
|
2011-08-11 13:52:40 +00:00 |
mach-tl-mr3x20.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-tl-wa901nd-v2.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-tl-wa901nd.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-tl-wr703n.c
|
ar71xx: add support for the TP-Link TL-WR703N v1 board
|
2011-09-21 11:47:53 +00:00 |
mach-tl-wr741nd.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-tl-wr841n.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-tl-wr941nd.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-tl-wr1043nd.c
|
rtl8366: unify rtl8366s and rtl8366rb platform data
|
2011-07-24 14:40:23 +00:00 |
mach-ubnt.c
|
ar71xx: don't probe the LAN PHY
|
2011-05-17 11:15:24 +00:00 |
mach-whr-hp-g300n.c
|
ar71xx: Buffalo WHR-HP-G300N kernel support
|
2011-10-24 21:49:26 +00:00 |
mach-wndr3700.c
|
rtl8366: unify rtl8366s and rtl8366rb platform data
|
2011-07-24 14:40:23 +00:00 |
mach-wnr2000.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-wp543.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-wrt160nl.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-wrt400n.c
|
ar71xx: use the gpio_keys_polled driver instead of gpio_buttons
|
2011-04-12 09:29:21 +00:00 |
mach-wzr-hp-ag300h.c
|
ar71xx: enable the usb power regulator on the wzr-hp-ag300h through gpio 2 (#9684)
|
2011-07-24 08:02:20 +00:00 |
mach-wzr-hp-g300nh.c
|
ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
|
2011-07-28 11:57:51 +00:00 |
mach-zcn-1523h.c
|
ar71xx: select the internal antenna by default on the ZCN-1523H boards
|
2011-06-04 12:30:09 +00:00 |
machtype.h
|
ar71xx: add initial support for the OpenMesh OM2P board
|
2011-10-27 07:54:51 +00:00 |
Makefile
|
ar71xx: add initial support for the OpenMesh OM2P board
|
2011-10-27 07:54:51 +00:00 |
nvram.c
|
ar71xx: fix whitespaces nits
|
2010-11-12 18:50:29 +00:00 |
nvram.h
|
ar71xx: fix random wireless mac address on the TEW-632BRP/DIR-615 boards
|
2009-12-27 20:59:54 +00:00 |
pci-ath9k-fixup.c
|
ar71xx: move ath9k specific PCI fixup into a separate file
|
2010-09-27 14:53:46 +00:00 |
pci-ath9k-fixup.h
|
ar71xx: move ath9k specific PCI fixup into a separate file
|
2010-09-27 14:53:46 +00:00 |
pci.c
|
ar71xx: enable PCI for the AR934[24] SoCs
|
2011-04-07 20:53:05 +00:00 |
prom.c
|
ar71xx: fix inline attribute location
|
2010-11-12 18:51:21 +00:00 |
setup.c
|
ar71xx: export SoC revision
|
2011-06-01 13:12:24 +00:00 |