1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-10-30 13:12:49 +02:00
openwrt-xburst/target/linux/ifxmips/files/arch/mips/pci/pci-ifxmips.c
blogic 2cccfb6609 fixes mdio, adds runtime board configuration for ifxmips
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11609 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-06-29 14:56:45 +00:00

194 lines
6.2 KiB
C

#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/mm.h>
#include <asm/ifxmips/ifxmips.h>
#include <asm/ifxmips/ifxmips_irq.h>
#include <asm/ifxmips/ifxmips_cgu.h>
#include <asm/addrspace.h>
#include <linux/vmalloc.h>
#define IFXMIPS_PCI_MEM_BASE 0x18000000
#define IFXMIPS_PCI_MEM_SIZE 0x02000000
#define IFXMIPS_PCI_IO_BASE 0x1AE00000
#define IFXMIPS_PCI_IO_SIZE 0x00200000
extern int ifxmips_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
extern int ifxmips_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
struct pci_ops ifxmips_pci_ops =
{
.read = ifxmips_pci_read_config_dword,
.write = ifxmips_pci_write_config_dword
};
static struct resource pci_io_resource =
{
.name = "io pci IO space",
.start = IFXMIPS_PCI_IO_BASE,
.end = IFXMIPS_PCI_IO_BASE + IFXMIPS_PCI_IO_SIZE - 1,
.flags = IORESOURCE_IO
};
static struct resource pci_mem_resource =
{
.name = "ext pci memory space",
.start = IFXMIPS_PCI_MEM_BASE,
.end = IFXMIPS_PCI_MEM_BASE + IFXMIPS_PCI_MEM_SIZE - 1,
.flags = IORESOURCE_MEM
};
static struct pci_controller ifxmips_pci_controller =
{
.pci_ops = &ifxmips_pci_ops,
.mem_resource = &pci_mem_resource,
.mem_offset = 0x00000000UL,
.io_resource = &pci_io_resource,
.io_offset = 0x00000000UL,
};
u32 ifxmips_pci_mapped_cfg;
int ifxmips_pci_external_clock = 0;
static int __init
ifxmips_pci_set_external_clk(char *str)
{
printk("cgu: setting up external pci clock\n");
ifxmips_pci_external_clock = 1;
return 1;
}
__setup("pci_external_clk", ifxmips_pci_set_external_clk);
int
pcibios_plat_dev_init(struct pci_dev *dev)
{
u8 pin;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
switch(pin)
{
case 0:
break;
case 1:
//falling edge level triggered:0x4, low level:0xc, rising edge:0x2
ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_CON) | 0xc, IFXMIPS_EBU_PCC_CON);
ifxmips_w32(ifxmips_r32(IFXMIPS_EBU_PCC_IEN) | 0x10, IFXMIPS_EBU_PCC_IEN);
break;
case 2:
case 3:
case 4:
printk ("WARNING: interrupt pin %d not supported yet!\n", pin);
default:
printk ("WARNING: invalid interrupt pin %d\n", pin);
return 1;
}
return 0;
}
static void __init
ifxmips_pci_startup(void)
{
u32 temp_buffer;
cgu_setup_pci_clk(ifxmips_pci_external_clock);
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OD) | (1 << 5), IFXMIPS_GPIO_P1_OD);
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | (1 << 5), IFXMIPS_GPIO_P1_DIR);
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL1);
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) & ~(1 << 5), IFXMIPS_GPIO_P1_ALTSEL0);
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) & ~0x2000, IFXMIPS_GPIO_P1_DIR);
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_DIR) | 0x4000, IFXMIPS_GPIO_P1_DIR);
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL1) & ~0x6000, IFXMIPS_GPIO_P1_ALTSEL1);
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_ALTSEL0) | 0x6000, IFXMIPS_GPIO_P1_ALTSEL0);
/* enable auto-switching between PCI and EBU */
ifxmips_w32(0xa, PCI_CR_CLK_CTRL);
/* busy, i.e. configuration is not done, PCI access has to be retried */
ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
wmb ();
/* BUS Master/IO/MEM access */
ifxmips_w32(ifxmips_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
/* enable external 2 PCI masters */
temp_buffer = ifxmips_r32(PCI_CR_PC_ARB);
temp_buffer &= (~(0xf << 16));
/* enable internal arbiter */
temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
/* enable internal PCI master reqest */
temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
/* enable EBU reqest */
temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
/* enable all external masters request */
temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
ifxmips_w32(temp_buffer, PCI_CR_PC_ARB);
wmb ();
ifxmips_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
ifxmips_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
ifxmips_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
ifxmips_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
ifxmips_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
ifxmips_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
ifxmips_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
ifxmips_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
ifxmips_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
ifxmips_w32(0x0e000008, PCI_CR_BAR11MASK);
ifxmips_w32(0, PCI_CR_PCI_ADDR_MAP11);
ifxmips_w32(0, PCI_CS_BASE_ADDR1);
#ifdef CONFIG_SWAP_IO_SPACE
/* both TX and RX endian swap are enabled */
ifxmips_w32(ifxmips_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
wmb ();
#endif
/*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
ifxmips_w32(ifxmips_r32(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
ifxmips_w32(ifxmips_r32(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
/*use 8 dw burst length */
ifxmips_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
ifxmips_w32(ifxmips_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
wmb();
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) & ~(1 << 5), IFXMIPS_GPIO_P1_OUT);
wmb();
mdelay(1);
ifxmips_w32(ifxmips_r32(IFXMIPS_GPIO_P1_OUT) | (1 << 5), IFXMIPS_GPIO_P1_OUT);
}
int __init
pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
switch(slot)
{
case 13:
/* IDSEL = AD29 --> USB Host Controller */
return (INT_NUM_IM1_IRL0 + 17);
case 14:
/* IDSEL = AD30 --> mini PCI connector */
return (INT_NUM_IM0_IRL0 + 22);
default:
printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
return 0;
}
}
int
pcibios_init(void)
{
extern int pci_probe_only;
pci_probe_only = 0;
printk("PCI: Probing PCI hardware on host bus 0.\n");
ifxmips_pci_startup ();
// IFXMIPS_PCI_REG32(PCI_CR_CLK_CTRL_REG) &= (~8);
ifxmips_pci_mapped_cfg = (u32)ioremap_nocache(0x17000000, 0x800 * 16);
printk("IFXMips PCI mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_mapped_cfg);
ifxmips_pci_controller.io_map_base = (unsigned long)ioremap(IFXMIPS_PCI_IO_BASE, IFXMIPS_PCI_IO_SIZE - 1);
printk("IFXMips PCI I/O mapped to 0x%08lX\n", (unsigned long)ifxmips_pci_controller.io_map_base);
register_pci_controller(&ifxmips_pci_controller);
return 0;
}
arch_initcall(pcibios_init);