mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-09-06 06:10:14 +03:00
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by removing a line(default is correct), and reversed the Lan/wan layout LLLLW to WLLLL. Added: image/Makefile now builds -factory.bin files. I am unsure of the accepted way to change the makefile but the name of the image needs to be 'linkn Kernel Image' in order to be accepted by the OEM firmware. Known issue: eth0 (internal switch i think has mac address: 00:11:22:33:44:55 but i think it should be same as the lan). Known issue: Pressing the reset button has no noticable effect, i would expect the router to boot failsafe if being pressed on boot, reboot if short press and reset all to default if long press. [juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead] Signed-off-by: David Pearce <david_18051985@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
503 lines
18 KiB
Makefile
503 lines
18 KiB
Makefile
#
|
|
# Copyright (C) 2008-2011 OpenWrt.org
|
|
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
define imgname
|
|
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
|
|
endef
|
|
|
|
define sysupname
|
|
$(call imgname,$(1),$(2))-sysupgrade.bin
|
|
endef
|
|
|
|
VMLINUX:=$(IMG_PREFIX)-vmlinux
|
|
UIMAGE:=$(IMG_PREFIX)-uImage
|
|
fs_squash:=squashfs-only
|
|
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
|
|
fs_squash:=initramfs
|
|
VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs
|
|
UIMAGE:=$(IMG_PREFIX)-uImage-initramfs
|
|
endif
|
|
|
|
ifeq ($(CONFIG_RALINK_RT288X),y)
|
|
define kernel_entry
|
|
-a 0x88000000 -e 0x88000000
|
|
endef
|
|
else
|
|
define kernel_entry
|
|
-a 0x80000000 -e 0x80000000
|
|
endef
|
|
endif
|
|
|
|
define mkcmdline
|
|
board=$(1) console=$(2),$(3)
|
|
endef
|
|
|
|
define CompressLzma
|
|
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
|
|
endef
|
|
|
|
define PatchKernelLzma
|
|
cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1)
|
|
$(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))'
|
|
$(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).bin.lzma)
|
|
endef
|
|
|
|
define MkImage
|
|
mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
|
|
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
|
|
-d $(2) $(3)
|
|
endef
|
|
|
|
define MkImageLzma
|
|
$(call PatchKernelLzma,$(1),$(2))
|
|
$(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage)
|
|
endef
|
|
|
|
define CatFiles
|
|
if [ `stat -c%s "$(1)"` -gt $(2) ]; then \
|
|
echo "Warning: $(1) is too big"; \
|
|
else if [ `stat -c%s $(3)` -gt $(4) ]; then \
|
|
echo "Warning: $(3) is too big"; \
|
|
else \
|
|
( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \
|
|
fi; fi
|
|
endef
|
|
|
|
define Sysupgrade/KRuImage
|
|
$(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)))
|
|
endef
|
|
|
|
define mkmtd
|
|
mtdparts=$(1):$(2)
|
|
endef
|
|
|
|
define mkmtd/phys
|
|
$(call mkmtd,physmap-flash.0,$(1))
|
|
endef
|
|
|
|
define mkmtd/spi
|
|
$(call mkmtd,spi0.0,$(1))
|
|
endef
|
|
|
|
define Image/BuildKernel
|
|
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
|
|
cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
|
|
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
|
|
$(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
|
|
cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
|
|
$(call Image/Build/Initramfs)
|
|
endef
|
|
|
|
define BuildFirmware/Generic
|
|
$(call MkImageLzma,$(2),$(3))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5))
|
|
endef
|
|
|
|
define BuildFirmware/Generic/initramfs
|
|
$(call MkImageLzma,$(2),$(3))
|
|
$(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin
|
|
endef
|
|
|
|
mtdlayout_4M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
|
|
define BuildFirmware/GENERIC_4M
|
|
$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120)
|
|
endef
|
|
|
|
define BuildFirmware/GENERIC_4M/initramfs
|
|
$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)))
|
|
endef
|
|
|
|
mtdlayout_8M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware)
|
|
kernel_size_8M=917504
|
|
rootfs_size_8M=7143424
|
|
define BuildFirmware/GENERIC_8M
|
|
$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M))
|
|
endef
|
|
|
|
define BuildFirmware/GENERIC_8M/initramfs
|
|
$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)))
|
|
endef
|
|
|
|
mtdlayout_argus_atp52b=192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware)
|
|
mtd_argus_atp52b_kernel_part_size=1179648
|
|
mtd_argus_atp52b_rootfs_part_size=6815744
|
|
define BuildFirmware/ARGUS_ATP52B
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_argus_atp52b)),$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size))
|
|
endef
|
|
|
|
define BuildFirmware/Buffalo
|
|
$(call MkImageLzma,$(2),$(3))
|
|
$(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
buffalo-enc -p $(3) -v 1.76 \
|
|
-i $(KDIR)/vmlinux-$(2).uImage \
|
|
-o $(KDIR)/vmlinux-$(2).uImage.enc; \
|
|
buffalo-enc -p $(3) -v 1.76 \
|
|
-i $(KDIR)/root.$(1) \
|
|
-o $(KDIR)/root.$(2).enc; \
|
|
buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
|
|
-l mlang8 -f 1 -r EU \
|
|
-i $(KDIR)/vmlinux-$(2).uImage.enc \
|
|
-i $(KDIR)/root.$(2).enc \
|
|
-o $(call imgname,$(1),$(2))-factory-EU.bin; \
|
|
fi
|
|
endef
|
|
|
|
|
|
define BuildFirmware/Buffalo2
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(4),$(5),$(6))
|
|
endef
|
|
|
|
mtdlayout_dir300b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
|
|
mtd_dir300b1_kernel_part_size=917504
|
|
mtd_dir300b1_rootfs_part_size=2949120
|
|
define BuildFirmware/DIR300B1
|
|
$(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
|
|
mkwrgimg -s $(4) -d /dev/mtdblock/2 \
|
|
-i $(call sysupname,$(1),$(2)) \
|
|
-o $(call imgname,$(1),$(2))-factory.bin
|
|
endef
|
|
|
|
define BuildFirmware/DIR300B1/initramfs
|
|
$(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size))
|
|
endef
|
|
|
|
define BuildFirmware/Edimax
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
mkedimaximg -i $(call sysupname,$(1),$(2)) \
|
|
-o $(call imgname,$(1),$(2))-factory.bin \
|
|
-s $(3) -m $(4) -f $(5) -S $(6); \
|
|
fi
|
|
endef
|
|
|
|
mtdlayout_f5d8235=320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware)
|
|
mtd_f5d8235_kernel_part_size=1572864
|
|
mtd_f5d8235_rootfs_part_size=6356992
|
|
define BuildFirmware/F5D8235
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_f5d8235)),$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size))
|
|
endef
|
|
|
|
define BuildFirmware/FONERA20N
|
|
$(call BuildFirmware/GENERIC_8M,$(1),fonera20n,FONERA20N,ttyS1,57600,phys)
|
|
$(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000)
|
|
endef
|
|
|
|
define BuildFirmware/FONERA20N/initramfs
|
|
$(call BuildFirmware/GENERIC_8M/initramfs,$(1),fonera20n,FONERA20N,ttyS1,57600,phys)
|
|
endef
|
|
|
|
mtdlayout_nw718=192k(u-boot)ro,128k(config)ro,64k(factory)ro,896k(kernel),2816k(rootfs),3712k@0x60000(firmware)
|
|
kernel_size_nw718=917504
|
|
rootfs_size_nw718=2883584
|
|
cmdline_nw718=$(call mkcmdline,NW718,ttyS1,57600) $(call mkmtd/spi,$(mtdlayout_nw718))
|
|
define BuildFirmware/NW718
|
|
$(call BuildFirmware/Generic,$(1),$(2),$(cmdline_nw718),$(kernel_size_nw718),$(rootfs_size_nw718))
|
|
$(call PatchKernelLzma,$(2),$(cmdline_nw718))
|
|
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \
|
|
-n "ARA1B4NCRNW718;1" \
|
|
-d "$(KDIR)/vmlinux-$(2).bin.lzma" \
|
|
"$(KDIR)/vmlinux-$(2).uImage"
|
|
$(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(kernel_size_nw718),$(KDIR)/root.$(1),$(rootfs_size_nw718),$(call imgname,$(1),$(2))-factory.bin)
|
|
endef
|
|
|
|
mtdlayout_rtg32b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
|
|
mtd_rtg32b1_kernel_part_size=917504
|
|
mtd_rtg32b1_rootfs_part_size=2949120
|
|
define BuildFirmware/RTG32B1
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/spi,$(mtdlayout_rtg32b1)),$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size))
|
|
endef
|
|
|
|
mtdlayout_rtn10plus=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware)
|
|
mtd_rtn10plus_kernel_part_size=917504
|
|
mtd_rtn10plus_rootfs_part_size=2949120
|
|
define BuildFirmware/RTN10PLUS
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size))
|
|
endef
|
|
|
|
define BuildFirmware/W306R_4M
|
|
$(call BuildFirmware/w306r,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120)
|
|
endef
|
|
|
|
define BuildFirmware/w306r
|
|
$(call PatchKernelLzma,$(2),$(3))
|
|
mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry)\
|
|
-n 'linkn Kernel Image' \
|
|
-d $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/vmlinux-$(2).uImage
|
|
$(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(4),$(KDIR)/root.$(1),$(5),$(call imgname,$(1),$(2))-factory.bin)
|
|
endef
|
|
|
|
mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware)
|
|
define BuildFirmware/WHRG300N
|
|
$(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys)
|
|
$(call BuildFirmware/Buffalo,$(1),whr-g300n,$(call mkcmdline,WHR-G300N,ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_whrg300n)),983040,3801088)
|
|
( \
|
|
echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
|
|
dd bs=512 count=1 conv=sync; \
|
|
dd if=$(call sysupname,$(1),whr-g300n); \
|
|
) > $(KDIR)/whr-g300n-tftp.tmp
|
|
buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
|
|
-o $(call imgname,$(1),whr-g300n)-tftp.bin
|
|
endef
|
|
|
|
mtdlayout_wl341v3=128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,896k(kernel),2880k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash)
|
|
kernel_size_wl341v3=917504
|
|
rootfs_size_wl341v3=2949120
|
|
define BuildFirmware/WL341V3
|
|
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_wl341v3)),$(kernel_size_wl341v3),$(rootfs_size_wl341v3))
|
|
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
|
|
( \
|
|
dd if=/dev/zero bs=195936 count=1; \
|
|
echo "1.01"; \
|
|
dd if=/dev/zero bs=581 count=1; \
|
|
echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \
|
|
dd if=/dev/zero bs=65552 count=1; \
|
|
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \
|
|
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
|
|
dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \
|
|
echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \
|
|
) > $(call imgname,$(1),$(2))-factory.bin; \
|
|
fi
|
|
endef
|
|
|
|
mtdlayout_wlitx4ag300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2816k(rootfs),64k(user)ro,3712k@0x50000(firmware)
|
|
define BuildFirmware/WLITX4AG300N
|
|
$(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,$(call mkmtd/phys,$(mtdlayout_wlitx4ag300n)),917504,2883584)
|
|
endef
|
|
|
|
#
|
|
# Templates
|
|
#
|
|
define Image/Build/Template/initramfs/initramfs
|
|
$(call BuildFirmware/$(1)/initramfs,initramfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8))
|
|
endef
|
|
|
|
define Image/Build/Template/squashfs-only/squashfs
|
|
$(call BuildFirmware/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8))
|
|
endef
|
|
|
|
#
|
|
# RT288X Profiles
|
|
#
|
|
define Image/Build/Profile/F5D8235V1
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v1,F5D8235_V1)
|
|
endef
|
|
|
|
define Image/Build/Profile/RTN15
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,rt-n15,RT-N15,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/V11STFE
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v11st-fe,V11ST-FE,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/WLITX4AG300N
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),WLITX4AG300N)
|
|
endef
|
|
|
|
ifeq ($(CONFIG_RALINK_RT288X),y)
|
|
define Image/Build/Profile/Default
|
|
$(call Image/Build/Profile/F5D8235V1,$(1))
|
|
$(call Image/Build/Profile/RTN15,$(1))
|
|
$(call Image/Build/Profile/V11STFE,$(1))
|
|
$(call Image/Build/Profile/WLITX4AG300N,$(1))
|
|
endef
|
|
endif
|
|
|
|
#
|
|
# RT305X Profiles
|
|
#
|
|
define Image/Build/Profile/ALL0256N
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,all0256n,ALL0256N,ttyS1,57600,spi)
|
|
endef
|
|
|
|
define Image/Build/Profile/ARGUS_ATP52B
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),ARGUS_ATP52B,argus_atp52b,ARGUS_ATP52B)
|
|
endef
|
|
|
|
define Image/Build/Profile/BC2
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,bc2,BC2,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/DIR300B1
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
|
|
endef
|
|
|
|
define Image/Build/Profile/ESR9753
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,esr-9753,ESR-9753,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/HW5503G
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,hw550-3g,HW550-3G,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/F5D8235V2
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v2,F5D8235_V2)
|
|
endef
|
|
|
|
define Image/Build/Profile/FONERA20N
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),FONERA20N)
|
|
endef
|
|
|
|
define Image/Build/Profile/FREESTATION5
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,freestation5,FREESTATION5,ttyS1,115200,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/MOFI35003GN
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,mofi3500-3gn,MOFI3500-3GN,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/NBG419N
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,nbg-419n,NBG419N,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/NW718
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),NW718,nw718)
|
|
endef
|
|
|
|
define Image/Build/Profile/OMNIEMB
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,omni-emb,OMNI-EMB,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/PWH2004
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,pwh2004,PWH2004,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/RTG32B1
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),RTG32B1,rt-g32-b1,RT-G32-B1)
|
|
endef
|
|
|
|
define Image/Build/Profile/RTN10PLUS
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),RTN10PLUS,rt-n10-plus,RT-N10-PLUS)
|
|
endef
|
|
|
|
define Image/Build/Profile/SLR7205
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,sl-r7205,SL-R7205,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/V22RW2X2
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/W306R_V20
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),W306R_4M,w306r-v20,W306R_V20,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/W502U
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/WCR150GN
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wcr150gn,WCR150GN,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/WHRG300N
|
|
$(call Image/Build/Template/$(fs_squashfs)/$(1),WHRG300N)
|
|
endef
|
|
|
|
define Image/Build/Profile/WL_330N
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n,WL_330N,ttyS1,57600,spi)
|
|
endef
|
|
|
|
define Image/Build/Profile/WL_330N3G
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-330n3g,WL_330N3G,ttyS1,57600,spi)
|
|
endef
|
|
|
|
define Image/Build/Profile/WL341V3
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),WL341V3,wl341v3,WL341V3)
|
|
endef
|
|
|
|
define Image/Build/Profile/WL351
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-351,WL-351,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/WR5123GN
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wr512-3gn-4M,WR512-3GN,ttyS1,57600,phys)
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr512-3gn-8M,WR512-3GN,ttyS1,57600,phys)
|
|
endef
|
|
|
|
|
|
define Image/Build/Profile/UPVEL
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,ur-336un,UR-336UN,ttyS1,57600,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/WR6202
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr6202,WR6202,ttyS1,115200,phys)
|
|
endef
|
|
|
|
define Image/Build/Profile/XDXRN502J
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,xdxrn502j,XDXRN502J,ttyS1,57600,phys)
|
|
endef
|
|
|
|
ifeq ($(CONFIG_RALINK_RT305X),y)
|
|
define Image/Build/Profile/Default
|
|
$(call Image/Build/Profile/ALL0256N,$(1))
|
|
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
|
|
$(call Image/Build/Profile/BC2,$(1))
|
|
$(call Image/Build/Profile/DIR300B1,$(1))
|
|
$(call Image/Build/Profile/ESR9753,$(1))
|
|
$(call Image/Build/Profile/F5D8235V2,$(1))
|
|
$(call Image/Build/Profile/RTN10PLUS,$(1))
|
|
$(call Image/Build/Profile/FONERA20N,$(1))
|
|
$(call Image/Build/Profile/FREESTATION5,$(1))
|
|
$(call Image/Build/Profile/HW5503G,$(1))
|
|
$(call Image/Build/Profile/MOFI35003GN,$(1))
|
|
$(call Image/Build/Profile/NBG419N,$(1))
|
|
$(call Image/Build/Profile/NW718,$(1))
|
|
$(call Image/Build/Profile/OMNIEMB,$(1))
|
|
$(call Image/Build/Profile/PWH2004,$(1))
|
|
$(call Image/Build/Profile/RTG32B1,$(1))
|
|
$(call Image/Build/Profile/SLR7205,$(1))
|
|
$(call Image/Build/Profile/V22RW2X2,$(1))
|
|
$(call Image/Build/Profile/W306R_V20,$(1))
|
|
$(call Image/Build/Profile/W502U,$(1))
|
|
$(call Image/Build/Profile/WCR150GN,$(1))
|
|
$(call Image/Build/Profile/WHRG300N,$(1))
|
|
$(call Image/Build/Profile/WL_330N,$(1))
|
|
$(call Image/Build/Profile/WL_330N3G,$(1))
|
|
$(call Image/Build/Profile/WL341V3,$(1))
|
|
$(call Image/Build/Profile/WL351,$(1))
|
|
$(call Image/Build/Profile/WR5123GN,$(1))
|
|
$(call Image/Build/Profile/WR6202,$(1))
|
|
$(call Image/Build/Profile/XDXRN502J,$(1))
|
|
endef
|
|
endif
|
|
|
|
#
|
|
# RT3662/RT3883 Profiles
|
|
#
|
|
define Image/Build/Profile/RTN56U
|
|
$(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,rt-n56u,RT-N56U,ttyS1,57600,phys)
|
|
endef
|
|
|
|
ifeq ($(CONFIG_RALINK_RT3883),y)
|
|
define Image/Build/Profile/Default
|
|
$(call Image/Build/Profile/RTN56U,$(1))
|
|
endef
|
|
endif
|
|
|
|
define Image/Build/Initramfs
|
|
$(call Image/Build/Profile/$(PROFILE),initramfs)
|
|
endef
|
|
|
|
define Image/Build/squashfs
|
|
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
|
|
endef
|
|
|
|
define Image/Build
|
|
$(call Image/Build/$(1))
|
|
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
|
|
$(call Image/Build/Profile/$(PROFILE),$(1))
|
|
endef
|
|
|
|
$(eval $(call BuildImage))
|