qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 14:55:32 +02:00
Code
OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/
19,494 Commits 13 Branches 0 Tags 117 MiB
C 81.3%
Makefile 7.4%
Roff 3.9%
Shell 3.3%
Assembly 2%
Other 1.9%
9406119753
Go to file
florian 9406119753 [adm8668] fix firstboot with new MTD map driver 
my-mkimage previously did not include the fs_mark of deadc0de because
upon formatting of jffs2 partition, U-Boot's CRC validation would not
allow the image to boot. This new MTD map will shrink the
kernel+rootfs+fs_mark image and recalculate the CRC, so that only the
kernel is part of the image validation. This also improves boot time,
since less is copied from FLASH->RAM. This is mostly from brcm47xx,
just with u-boot image vs TRX partitions.

Signed-off-by: Scott Nicholas <scott.nicholas@scottn.us>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25176 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-01-27 21:50:00 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include fixup board specific KERNELNAME overrides 2011-01-27 12:21:10 +00:00
package [package] enable MOS7720 usb-serial devices 2011-01-27 21:49:53 +00:00
scripts mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus 2011-01-16 01:25:06 +00:00
target [adm8668] fix firstboot with new MTD map driver 2011-01-27 21:50:00 +00:00
toolchain cleanup toolchain version handling 2011-01-27 13:55:00 +00:00
tools Add missing XAW macros 2011-01-27 19:52:36 +00:00
.gitignore .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default 2010-12-04 10:27:13 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in 2.6.38 supports xz ramdisks, too 2011-01-24 06:41:11 +00:00
feeds.conf.default [feeds] switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk mpc85xx: add a new 'spe_fpu' feature flag for the FPU used on freescale powerpc cpus 2011-01-16 01:25:06 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org