1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 03:44:16 +02:00
OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/
Go to file
2010-11-23 20:17:08 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include use PREFIX/bin instead of PREFIX/sbin for all host builds (fixes e2fsprogs path) 2010-11-22 18:49:18 +00:00
package mac80211: improve station mode nullfunc probing 2010-11-23 02:13:54 +00:00
scripts switch from ext2 to ext4 (w/o) journaling 2010-11-22 12:12:39 +00:00
target [brcm63xx] image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. 2010-11-23 20:17:08 +00:00
toolchain uClibc: fix ubicom32 compile error with 0.9.32 2010-11-22 17:50:08 +00:00
tools e2fsprogs: fix libuuid installation 2010-11-22 21:56:15 +00:00
.gitignore .gitignore: Undo accidental commit. 2010-05-10 17:59:05 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in remove 2.6.25 support 2010-11-22 13:43:32 +00:00
feeds.conf.default [feeds] switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk remove an obsolete comment for the flock template 2010-10-31 15:36:47 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org