qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-09-28 22:04:11 +03:00
Code
OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/
24,454 Commits 13 Branches 0 Tags 117 MiB
C 81.3%
Makefile 7.4%
Roff 3.9%
Shell 3.3%
Assembly 2%
Other 1.9%
98837afb76
Go to file
hauke 98837afb76 [brcm47xx]: activate failsafe on all ports of the switch and not just port 0. 
Sometimes the port 0 was the WAN port or there could be some device 
where the port 0 is not wired to an actual Ethernet port. Now telnet in 
failsafe will listen on all ports of the switch so user do not have to 
search for the correct port any more. This change will make the switch 
leak traffic between the WAN and the LAN port, but you should not use 
failsafe while connected to a untrusted network.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:04:59 +00:00
docs [docs]: kamikaze has been released long ago 2011-02-11 14:04:00 +00:00
include [include] version.mk: ensure that %S is always populated with a subtarget identifier, fallback to "generic" if no subtarget exists 2012-09-24 18:26:48 +00:00
package base-files: remove obsolete entries from sysctl.conf (#12236) 2012-09-24 15:24:01 +00:00
scripts [scripts] fix library bundling when host libraries reside in /lib/tls/ or similar 2012-09-09 22:37:32 +00:00
target [brcm47xx]: activate failsafe on all ports of the switch and not just port 0. 2012-09-25 14:04:59 +00:00
toolchain build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems 2012-09-23 09:50:01 +00:00
tools build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems 2012-09-23 09:50:01 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in kernel: enable perf events when enabling profiling, fixes oprofile on arm 2012-09-20 20:27:14 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile [buildroot] abort built in prereq target if there is no site config file for the current target 2012-01-19 12:19:28 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
rules.mk rules.mk: add TARGET_AR and TARGET_RANLIB 2012-09-22 20:10:24 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org