1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-11 09:35:01 +02:00
openwrt-xburst/target/linux/brcm47xx/base-files/lib/preinit
hauke 98837afb76 [brcm47xx]: activate failsafe on all ports of the switch and not just port 0.
Sometimes the port 0 was the WAN port or there could be some device 
where the port 0 is not wired to an actual Ethernet port. Now telnet in 
failsafe will listen on all ports of the switch so user do not have to 
search for the correct port any more. This change will make the switch 
leak traffic between the WAN and the LAN port, but you should not use 
failsafe while connected to a untrusted network.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-25 14:04:59 +00:00
..
03_init_hotplug_failsafe_brcm add back the base-files/image code from brcm-2.4 to brcm47xx 2010-06-26 20:41:49 +00:00
05_init_interfaces_brcm add back the base-files/image code from brcm-2.4 to brcm47xx 2010-06-26 20:41:49 +00:00
05_reset_button_brcm [brcm47xx]: target (base-files): Fixed failsafe mode by adding back insmod diag 2010-07-15 02:46:03 +00:00
05_set_failsafe_switch_brcm add back the base-files/image code from brcm-2.4 to brcm47xx 2010-06-26 20:41:49 +00:00
15_mount_proc_brcm add back the base-files/image code from brcm-2.4 to brcm47xx 2010-06-26 20:41:49 +00:00
15_set_preinit_interface_brcm [brcm47xx]: activate failsafe on all ports of the switch and not just port 0. 2012-09-25 14:04:59 +00:00
20_failsafe_net_echo_brcm add back the base-files/image code from brcm-2.4 to brcm47xx 2010-06-26 20:41:49 +00:00
20_failsafe_set_boot_wait_brcm add back the base-files/image code from brcm-2.4 to brcm47xx 2010-06-26 20:41:49 +00:00