jow db07bdac3e [ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups ...

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24215 3c298f89-4303-0410-b956-a3cf2f4a3e73

2010-12-02 20:19:55 +00:00

..

ap81

[ar71xx] ap81: register ethernet devices, and add default network configuration file

2009-03-17 18:07:16 +00:00

ap83

[ar71xx] add default network configuration for the AP83 board

2009-06-06 16:01:09 +00:00

ap96

Add support for Atheros AP96 reference board

2010-09-27 08:59:53 +00:00

aw-nr580

[ar71xx] add default network configuration for the AW-NR580

2009-02-27 20:49:51 +00:00

bullet-m

ar71xx: add default network configuration for the Bullet M

2009-10-01 19:41:06 +00:00

dir-600-a1

ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well (fixes #7563)

2010-10-14 00:14:59 +00:00

dir-615-c1

ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards

2010-04-09 08:40:09 +00:00

dir-825-b1

[ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups

2010-12-02 20:19:55 +00:00

eap7660d

ar71xx: add support for the Senao EAP7660D board

2010-06-18 16:22:05 +00:00

generic

[ar71xx] defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci

2009-02-26 05:54:07 +00:00

jwap003

ar71xx: initial support for jjPlus JWAP003

2010-10-01 07:09:29 +00:00

mzk-w04nu

[ar71xx] defconfig: move defaults from /etc/config/defaults/ to /etc/defconfig/, previous location broke uci

2009-02-26 05:54:07 +00:00

pb42

[ar71xx] pb42: fix ethernet, remove USB registration, add default network configuration

2009-03-14 18:28:33 +00:00

pb44

ar71xx: add default network configuration for the PB44 board

2010-03-09 18:05:58 +00:00

rb-411

[ar71xx] add default network configuration for the RB-411 board

2009-02-28 18:55:46 +00:00

rb-433

ar71xx: add default network configuration file for the RB450/RB433 boards

2010-06-08 20:19:23 +00:00

rb-433u

ar71xx: add default network config for the RB433UAH board

2010-06-12 13:20:41 +00:00

rb-450

ar71xx: add default network configuration file for the RB450/RB433 boards

2010-06-08 20:19:23 +00:00

rb-450g

[PATCH 1/2] Add support for the ar8316 switch.

2010-04-05 23:03:16 +00:00

rb-750

ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver

2010-10-14 13:41:42 +00:00

routerstation

ar71xx: add default network configuration for RS and RS-Pro

2009-10-20 19:36:47 +00:00

routerstation-pro

[PATCH 1/2] Add support for the ar8316 switch.

2010-04-05 23:03:16 +00:00

tew-632brp

ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards

2010-04-09 08:40:09 +00:00

tl-wa901nd

ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values)

2010-07-22 12:37:44 +00:00

tl-wr741nd

ar71xx: add a new driver for the ar7240 switch using swconfig.

2010-08-16 19:21:57 +00:00

tl-wr841n-v1

ar71xx: add missing protocol definitions to default network configurations

2010-03-09 18:05:31 +00:00

tl-wr941nd

ar71xx: add missing protocol definitions to default network configurations

2010-03-09 18:05:31 +00:00

tl-wr1043nd

ar71xx: add default network configuration file for the TL-WR1043ND board

2010-02-24 13:39:20 +00:00

wndr3700

[ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups

2010-12-02 20:19:55 +00:00

wnr2000

[ar71xx] wnr2000: enable ar8216 workaround, add network config. LAN ports now work

2009-02-26 05:54:32 +00:00

wp543

ar71xx: add default network configuration file for the WP543 board

2009-10-20 12:59:45 +00:00

wrt160nl

adjust switch default configs for the swconfig api change

2010-01-18 00:38:08 +00:00

wzr-hp-g300nh

[ar71xx] tune rtl8366s default config, make vlan 1 cpu port tagged and use eth0.1 for the lan interface - this brings the configuration more in line with other switch setups

2010-12-02 20:19:55 +00:00