mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-09 11:04:04 +02:00
28dec42aa3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20832 3c298f89-4303-0410-b956-a3cf2f4a3e73
430 lines
9.6 KiB
C
430 lines
9.6 KiB
C
/*
|
|
* Copyright (C) 2007 Ingenic Semiconductor Inc.
|
|
* Author: Peter <jlwei@ingenic.cn>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <nand.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/jz4740.h>
|
|
|
|
#define KEY_U_OUT (32 * 2 + 16)
|
|
#define KEY_U_IN (32 * 3 + 19)
|
|
|
|
/*
|
|
* NAND flash definitions
|
|
*/
|
|
|
|
#define NAND_DATAPORT 0xb8000000
|
|
#define NAND_ADDRPORT 0xb8010000
|
|
#define NAND_COMMPORT 0xb8008000
|
|
|
|
#define ECC_BLOCK 512
|
|
#define ECC_POS 6
|
|
#define PAR_SIZE 9
|
|
|
|
#define __nand_enable() (REG_EMC_NFCSR |= EMC_NFCSR_NFE1 | EMC_NFCSR_NFCE1)
|
|
#define __nand_disable() (REG_EMC_NFCSR &= ~(EMC_NFCSR_NFCE1))
|
|
#define __nand_ecc_rs_encoding() \
|
|
(REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST | EMC_NFECR_RS | EMC_NFECR_RS_ENCODING)
|
|
#define __nand_ecc_rs_decoding() \
|
|
(REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST | EMC_NFECR_RS | EMC_NFECR_RS_DECODING)
|
|
#define __nand_ecc_disable() (REG_EMC_NFECR &= ~EMC_NFECR_ECCE)
|
|
#define __nand_ecc_encode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_ENCF))
|
|
#define __nand_ecc_decode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_DECF))
|
|
|
|
static inline void __nand_dev_ready(void)
|
|
{
|
|
unsigned int timeout = 10000;
|
|
while ((REG_GPIO_PXPIN(2) & 0x40000000) && timeout--);
|
|
while (!(REG_GPIO_PXPIN(2) & 0x40000000));
|
|
}
|
|
|
|
#define __nand_cmd(n) (REG8(NAND_COMMPORT) = (n))
|
|
#define __nand_addr(n) (REG8(NAND_ADDRPORT) = (n))
|
|
#define __nand_data8() REG8(NAND_DATAPORT)
|
|
#define __nand_data16() REG16(NAND_DATAPORT)
|
|
|
|
#if (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R3)
|
|
#define NAND_BUS_WIDTH 8
|
|
#define NAND_ROW_CYCLE 3
|
|
#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R2)
|
|
#define NAND_BUS_WIDTH 8
|
|
#define NAND_ROW_CYCLE 2
|
|
#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R3)
|
|
#define NAND_BUS_WIDTH 16
|
|
#define NAND_ROW_CYCLE 3
|
|
#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R2)
|
|
#define NAND_BUS_WIDTH 16
|
|
#define NAND_ROW_CYCLE 2
|
|
#endif
|
|
|
|
/*
|
|
* NAND flash parameters
|
|
*/
|
|
static int page_size = 2048;
|
|
static int oob_size = 64;
|
|
static int ecc_count = 4;
|
|
static int page_per_block = 64;
|
|
static int bad_block_pos = 0;
|
|
static int block_size = 131072;
|
|
|
|
static unsigned char oob_buf[128] = {0};
|
|
|
|
/*
|
|
* External routines
|
|
*/
|
|
extern void flush_cache_all(void);
|
|
extern int serial_init(void);
|
|
extern void serial_puts(const char *s);
|
|
extern void sdram_init(void);
|
|
extern void pll_init(void);
|
|
extern void usb_boot();
|
|
|
|
/*
|
|
* NAND flash routines
|
|
*/
|
|
#if NAND_BUS_WIDTH == 16
|
|
static inline void nand_read_buf16(void *buf, int count)
|
|
{
|
|
int i;
|
|
u16 *p = (u16 *)buf;
|
|
|
|
for (i = 0; i < count; i += 2)
|
|
*p++ = __nand_data16();
|
|
}
|
|
#define nand_read_buf nand_read_buf16
|
|
|
|
#elif NAND_BUS_WIDTH == 8
|
|
static inline void nand_read_buf8(void *buf, int count)
|
|
{
|
|
int i;
|
|
u8 *p = (u8 *)buf;
|
|
|
|
for (i = 0; i < count; i++)
|
|
*p++ = __nand_data8();
|
|
}
|
|
#define nand_read_buf nand_read_buf8
|
|
|
|
#endif
|
|
|
|
/* Correct 1~9-bit errors in 512-bytes data */
|
|
static void rs_correct(unsigned char *dat, int idx, int mask)
|
|
{
|
|
int i;
|
|
|
|
idx--;
|
|
|
|
i = idx + (idx >> 3);
|
|
if (i >= 512)
|
|
return;
|
|
|
|
mask <<= (idx & 0x7);
|
|
|
|
dat[i] ^= mask & 0xff;
|
|
if (i < 511)
|
|
dat[i+1] ^= (mask >> 8) & 0xff;
|
|
}
|
|
|
|
static int nand_read_oob(int page_addr, uchar *buf, int size)
|
|
{
|
|
int col_addr;
|
|
if (page_size != 512)
|
|
col_addr = page_size;
|
|
else {
|
|
col_addr = 0;
|
|
__nand_dev_ready();
|
|
}
|
|
|
|
if (page_size != 512)
|
|
/* Send READ0 command */
|
|
__nand_cmd(NAND_CMD_READ0);
|
|
else
|
|
/* Send READOOB command */
|
|
__nand_cmd(NAND_CMD_READOOB);
|
|
|
|
/* Send column address */
|
|
__nand_addr(col_addr & 0xff);
|
|
if (page_size != 512)
|
|
__nand_addr((col_addr >> 8) & 0xff);
|
|
|
|
/* Send page address */
|
|
__nand_addr(page_addr & 0xff);
|
|
__nand_addr((page_addr >> 8) & 0xff);
|
|
#ifdef NAND_ROW_CYCLE == 3
|
|
__nand_addr((page_addr >> 16) & 0xff);
|
|
#endif
|
|
|
|
/* Send READSTART command for 2048 or 4096 ps NAND */
|
|
if (page_size != 512)
|
|
__nand_cmd(NAND_CMD_READSTART);
|
|
|
|
/* Wait for device ready */
|
|
__nand_dev_ready();
|
|
|
|
/* Read oob data */
|
|
nand_read_buf(buf, size);
|
|
if (page_size == 512)
|
|
__nand_dev_ready();
|
|
return 0;
|
|
}
|
|
|
|
static int nand_read_page(int page_addr, uchar *dst, uchar *oobbuf)
|
|
{
|
|
uchar *databuf = dst, *tmpbuf;
|
|
int i, j;
|
|
|
|
/*
|
|
* Read oob data
|
|
*/
|
|
nand_read_oob(page_addr, oobbuf, oob_size);
|
|
|
|
/*
|
|
* Read page data
|
|
*/
|
|
|
|
/* Send READ0 command */
|
|
__nand_cmd(NAND_CMD_READ0);
|
|
|
|
/* Send column address */
|
|
__nand_addr(0);
|
|
if (page_size != 512)
|
|
__nand_addr(0);
|
|
|
|
/* Send page address */
|
|
__nand_addr(page_addr & 0xff);
|
|
__nand_addr((page_addr >> 8) & 0xff);
|
|
#if NAND_ROW_CYCLE == 3
|
|
__nand_addr((page_addr >> 16) & 0xff);
|
|
#endif
|
|
|
|
/* Send READSTART command for 2048 or 4096 ps NAND */
|
|
if (page_size != 512)
|
|
__nand_cmd(NAND_CMD_READSTART);
|
|
|
|
/* Wait for device ready */
|
|
__nand_dev_ready();
|
|
|
|
/* Read page data */
|
|
tmpbuf = databuf;
|
|
|
|
for (i = 0; i < ecc_count; i++) {
|
|
volatile unsigned char *paraddr = (volatile unsigned char *)EMC_NFPAR0;
|
|
unsigned int stat;
|
|
|
|
/* Enable RS decoding */
|
|
REG_EMC_NFINTS = 0x0;
|
|
__nand_ecc_rs_decoding();
|
|
|
|
/* Read data */
|
|
nand_read_buf((void *)tmpbuf, ECC_BLOCK);
|
|
|
|
/* Set PAR values */
|
|
for (j = 0; j < PAR_SIZE; j++) {
|
|
#if defined(CONFIG_SYS_NAND_ECC_POS)
|
|
*paraddr++ = oobbuf[CONFIG_SYS_NAND_ECC_POS + i*PAR_SIZE + j];
|
|
#else
|
|
*paraddr++ = oobbuf[ECC_POS + i*PAR_SIZE + j];
|
|
#endif
|
|
}
|
|
|
|
/* Set PRDY */
|
|
REG_EMC_NFECR |= EMC_NFECR_PRDY;
|
|
|
|
/* Wait for completion */
|
|
__nand_ecc_decode_sync();
|
|
|
|
/* Disable decoding */
|
|
__nand_ecc_disable();
|
|
|
|
/* Check result of decoding */
|
|
stat = REG_EMC_NFINTS;
|
|
if (stat & EMC_NFINTS_ERR) {
|
|
/* Error occurred */
|
|
/* serial_puts("\n Error occurred\n"); */
|
|
if (stat & EMC_NFINTS_UNCOR) {
|
|
/* Uncorrectable error occurred */
|
|
/* serial_puts("\nUncorrectable error occurred\n"); */
|
|
}
|
|
else {
|
|
unsigned int errcnt, index, mask;
|
|
|
|
errcnt = (stat & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
|
|
switch (errcnt) {
|
|
case 4:
|
|
index = (REG_EMC_NFERR3 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
|
|
mask = (REG_EMC_NFERR3 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
|
|
rs_correct(tmpbuf, index, mask);
|
|
/* FALL-THROUGH */
|
|
case 3:
|
|
index = (REG_EMC_NFERR2 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
|
|
mask = (REG_EMC_NFERR2 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
|
|
rs_correct(tmpbuf, index, mask);
|
|
/* FALL-THROUGH */
|
|
case 2:
|
|
index = (REG_EMC_NFERR1 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
|
|
mask = (REG_EMC_NFERR1 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
|
|
rs_correct(tmpbuf, index, mask);
|
|
/* FALL-THROUGH */
|
|
case 1:
|
|
index = (REG_EMC_NFERR0 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
|
|
mask = (REG_EMC_NFERR0 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
|
|
rs_correct(tmpbuf, index, mask);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
tmpbuf += ECC_BLOCK;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SYS_NAND_BADBLOCK_PAGE
|
|
#define CONFIG_SYS_NAND_BADBLOCK_PAGE 0 /* NAND bad block was marked at this page in a block, starting from 0 */
|
|
#endif
|
|
|
|
static void nand_load(int offs, int uboot_size, uchar *dst)
|
|
{
|
|
int page;
|
|
int pagecopy_count;
|
|
|
|
__nand_enable();
|
|
|
|
page = offs / page_size;
|
|
pagecopy_count = 0;
|
|
while (pagecopy_count < (uboot_size / page_size)) {
|
|
if (page % page_per_block == 0) {
|
|
nand_read_oob(page + CONFIG_SYS_NAND_BADBLOCK_PAGE, oob_buf, oob_size);
|
|
if (oob_buf[bad_block_pos] != 0xff) {
|
|
page += page_per_block;
|
|
/* Skip bad block */
|
|
continue;
|
|
}
|
|
}
|
|
/* Load this page to dst, do the ECC */
|
|
nand_read_page(page, dst, oob_buf);
|
|
|
|
dst += page_size;
|
|
page++;
|
|
pagecopy_count++;
|
|
}
|
|
|
|
__nand_disable();
|
|
}
|
|
|
|
static void jz_nand_init(void) {
|
|
|
|
/* Optimize the timing of nand */
|
|
REG_EMC_SMCR1 = 0x094c4400;
|
|
}
|
|
|
|
static void gpio_init(void)
|
|
{
|
|
/*
|
|
* Initialize SDRAM pins
|
|
*/
|
|
#if defined(CONFIG_JZ4720)
|
|
__gpio_as_sdram_16bit_4720();
|
|
#elif defined(CONFIG_JZ4725)
|
|
__gpio_as_sdram_16bit_4725();
|
|
#else
|
|
__gpio_as_sdram_32bit();
|
|
#endif
|
|
|
|
/*
|
|
* Initialize UART0 pins
|
|
*/
|
|
__gpio_as_uart0();
|
|
}
|
|
|
|
static int is_usb_boot()
|
|
{
|
|
int keyU = 0;
|
|
|
|
__gpio_as_input(KEY_U_IN);
|
|
__gpio_enable_pull(KEY_U_IN);
|
|
|
|
__gpio_as_output(KEY_U_OUT);
|
|
__gpio_clear_pin(KEY_U_OUT);
|
|
|
|
keyU = __gpio_get_pin(KEY_U_IN);
|
|
|
|
if (keyU)
|
|
serial_puts("[U] not pressed\n");
|
|
else
|
|
serial_puts("[U] pressed\n");
|
|
|
|
return !keyU;
|
|
}
|
|
|
|
void nand_boot(void)
|
|
{
|
|
void (*uboot)(void);
|
|
|
|
/*
|
|
* Init hardware
|
|
*/
|
|
jz_nand_init();
|
|
gpio_init();
|
|
serial_init();
|
|
|
|
serial_puts("\n\nNAND Secondary Program Loader\n\n");
|
|
|
|
pll_init();
|
|
sdram_init();
|
|
|
|
#if defined(CONFIG_NANONOTE)
|
|
if(is_usb_boot()) {
|
|
serial_puts("enter USB BOOT mode\n");
|
|
usb_boot();
|
|
}
|
|
#endif
|
|
|
|
page_size = CONFIG_SYS_NAND_PAGE_SIZE;
|
|
block_size = CONFIG_SYS_NAND_BLOCK_SIZE;
|
|
page_per_block = CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE;
|
|
bad_block_pos = (page_size == 512) ? 5 : 0;
|
|
oob_size = page_size / 32;
|
|
ecc_count = page_size / ECC_BLOCK;
|
|
|
|
/*
|
|
* Load U-Boot image from NAND into RAM
|
|
*/
|
|
nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
|
|
(uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
|
|
|
|
uboot = (void (*)(void))CONFIG_SYS_NAND_U_BOOT_START;
|
|
|
|
serial_puts("Starting U-Boot ...\n");
|
|
|
|
/*
|
|
* Flush caches
|
|
*/
|
|
flush_cache_all();
|
|
|
|
/*
|
|
* Jump to U-Boot image
|
|
*/
|
|
(*uboot)();
|
|
}
|