1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 19:49:54 +02:00
OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/
Go to file
nbd a76eddd489 ath: fix world regulatory domain fix-up so that all regulatory rules are processed
r24503 (trunk) and r24505 (backfire) revised the regulatory rules used
for the ath drivers' world regulatory domains in the 5GHz band by
opening up channels 36, 40, 44, and 48 to being used without the
*_PASSIVE_SCAN and *_NO_IBSS flags set. This was done by breaking
ATH9K_5GHZ_5150_5350 into two REG_RULES. The various struct
ieee80211_regdomains that reference these rules in their reg_rules
fields need to have their n_reg_rules fields updated accordingly.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-08 12:36:25 +00:00
docs docs: fix a counting fail 2010-05-29 13:11:48 +00:00
include use := instead of = for PKG_CONFIG_PATH to prevent recursion 2011-02-06 16:04:33 +00:00
package ath: fix world regulatory domain fix-up so that all regulatory rules are processed 2011-02-08 12:36:25 +00:00
scripts scripts/diffconfig.sh: use the new kconfig mode to remove some more unnecessary entries in the generated output 2011-01-29 02:35:28 +00:00
target omap24xx: Remove 2.6.36 2011-02-06 21:06:43 +00:00
toolchain [toolchain/uClibc/git]: autodetect ARM variant/ABI setup based on the compiler settings 2011-02-02 20:19:28 +00:00
tools [tools] libtool: fix misspelled procedure name... 2011-02-03 20:34:34 +00:00
.gitignore .gitignore: add *.o and .DS_Store by default - apparently some git versions do not ignore these by default 2010-12-04 10:27:13 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in [buildroot] prepare support for libiconv, libintl stub/full switching 2011-02-02 01:26:19 +00:00
feeds.conf.default [feeds] switch to LuCI trunk, should be stable enough for common use now 2010-11-16 00:05:41 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile add a command for printing a cleaned up make target database - will be used to analyze package dependencies at some point 2010-09-01 17:51:36 +00:00
README remove bison requirement (see [10398] & [14900]) 2010-03-05 09:48:32 +00:00
rules.mk [toolchain] remove support for disabling large file support, it is broken, breaks compatibility to anything and has no effect on most packages 2011-01-28 17:00:43 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org