mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-01-23 14:01:06 +02:00
b4509c8ec7
So far, we are setting the bridge interface up before having added any bridge interface ports. This results in the bridge assigning a random mac address to its bridge interface and therefore IPv6 assigning a matching link local address to the bridge interface as soon as the bridge interface is up. After adding the first bridge port interface, the bridge's mac address is reset correctly, however the IPv6 link local address stays the same. This commit ensures that we are at least having the IPv6 link local address of the first interface added to the bridge instead of a random one. Signed-off-by: Linus Lüssing <linus.luessing@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/branches/backfire@26427 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org