mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-14 18:21:32 +02:00
28dec42aa3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20832 3c298f89-4303-0410-b956-a3cf2f4a3e73
192 lines
6.3 KiB
C
192 lines
6.3 KiB
C
/*
|
|
* Authors: Xiangfu Liu <xiangfu.z@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 3 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
/*
|
|
* This file contains the configuration parameters for the NanoNote.
|
|
*/
|
|
#ifndef __CONFIG_NANONOTE_H
|
|
#define __CONFIG_NANONOTE_H
|
|
|
|
#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
|
|
#define CONFIG_JzRISC 1 /* JzRISC core */
|
|
#define CONFIG_JZSOC 1 /* Jz SoC */
|
|
#define CONFIG_JZ4740 1 /* Jz4740 SoC */
|
|
#define CONFIG_NANONOTE 1
|
|
|
|
#define CONFIG_LCD 1 /* LCD support */
|
|
#define LCD_BPP LCD_COLOR32 /*5:18,24,32 bits per pixel */
|
|
#define CONFIG_SYS_WHITE_ON_BLACK 1
|
|
|
|
#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
|
|
#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
|
|
#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL / 256) /* incrementer freq */
|
|
#define CONFIG_SYS_MIPS_TIMER_FREQ CONFIG_SYS_CPU_SPEED
|
|
|
|
#define CONFIG_SYS_UART_BASE UART0_BASE /* Base of the UART channel */
|
|
#define CONFIG_BAUDRATE 57600
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CONFIG_MMC 1
|
|
#define CONFIG_FAT 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT 1
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1
|
|
#define CONFIG_SYS_NO_FLASH 1
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
|
|
#define CONFIG_BOOTDELAY 0
|
|
#define CONFIG_BOOTFILE "uImage" /* file to load */
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#define CONFIG_CMD_BOOTD /* bootd */
|
|
#define CONFIG_CMD_CONSOLE /* coninfo */
|
|
#define CONFIG_CMD_ECHO /* echo arguments */
|
|
|
|
#define CONFIG_CMD_LOADB /* loadb */
|
|
#define CONFIG_CMD_LOADS /* loads */
|
|
#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
|
|
#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
|
|
#define CONFIG_CMD_RUN /* run command in env variable */
|
|
#define CONFIG_CMD_SAVEENV /* saveenv */
|
|
#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
|
|
#define CONFIG_CMD_SOURCE /* "source" command support */
|
|
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_FAT
|
|
|
|
/*
|
|
* Serial download configuration
|
|
*/
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CONFIG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "QI# " /* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN 896 * 1024
|
|
#define CONFIG_SYS_BOOTPARAMS_LEN 128 * 1024
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
|
|
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
|
|
#define CONFIG_SYS_LOAD_ADDR 0x80600000 /* default load address */
|
|
#define CONFIG_SYS_MEMTEST_START 0x80100000
|
|
#define CONFIG_SYS_MEMTEST_END 0x80800000
|
|
|
|
/*
|
|
* Environment
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
|
|
|
|
/*
|
|
* NAND FLASH configuration
|
|
*/
|
|
/* NAND Boot config code */
|
|
#define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3
|
|
|
|
#define NANONOTE_NAND_SIZE 2 /* if board nand flash is 1GB, set to 1
|
|
* if board nand flash is 2GB, set to 2
|
|
* for change the PAGE_SIZE and BLOCK_SIZE
|
|
* will delete when there is no 1GB flash
|
|
*/
|
|
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * NANONOTE_NAND_SIZE)
|
|
/* nand chip block size */
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * NANONOTE_NAND_SIZE << 10)
|
|
/* nand bad block was marked at this page in a block, start from 0 */
|
|
#define CONFIG_SYS_NAND_BADBLOCK_PAGE 127
|
|
/* ECC offset position in oob area, default value is 6 if it isn't defined */
|
|
#define CONFIG_SYS_NAND_ECC_POS (6 * NANONOTE_NAND_SIZE)
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define NAND_MAX_CHIPS 1
|
|
#define CONFIG_SYS_NAND_BASE 0xB8000000
|
|
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/
|
|
#define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE
|
|
|
|
/*
|
|
* IPL (Initial Program Loader, integrated inside CPU)
|
|
* Will load first 8k from NAND (SPL) into cache and execute it from there.
|
|
*
|
|
* SPL (Secondary Program Loader)
|
|
* Will load special U-Boot version (NUB) from NAND and execute it. This SPL
|
|
* has to fit into 8kByte. It sets up the CPU and configures the SDRAM
|
|
* controller and the NAND controller so that the special U-Boot image can be
|
|
* loaded from NAND to SDRAM.
|
|
*
|
|
* NUB (NAND U-Boot)
|
|
* This NAND U-Boot (NUB) is a special U-Boot version which can be started
|
|
* from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
|
|
*
|
|
*/
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
|
|
/* Start NUB from this addr*/
|
|
|
|
/*
|
|
* Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
|
|
*/
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
|
|
|
|
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
|
#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_BLOCK_SIZE)
|
|
/* environment starts here */
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
|
|
/* in board/nanonote/config.mk TEXT_BAS = 0x88000000 */
|
|
#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
|
|
|
|
/*
|
|
* SDRAM Info.
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
/*
|
|
* Cache Configuration
|
|
*/
|
|
#define CONFIG_SYS_DCACHE_SIZE 16384
|
|
#define CONFIG_SYS_ICACHE_SIZE 16384
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32
|
|
|
|
/*
|
|
* GPIO definition
|
|
*/
|
|
#define GPIO_LCD_CS (2 * 32 + 21)
|
|
#define GPIO_DISP_OFF_N (3 * 32 + 21)
|
|
#define GPIO_PWM (3 * 32 + 27)
|
|
|
|
#define GPIO_AMP_EN (3 * 32 + 4)
|
|
|
|
#define GPIO_SDPW_EN (3 * 32 + 2)
|
|
#define GPIO_SD_DETECT (3 * 32 + 0)
|
|
|
|
#define GPIO_USB_DETECT (3 * 32 + 27)
|
|
#define GPIO_BUZZ_PWM (3 * 32 + 28)
|
|
|
|
#define GPIO_AUDIO_POP (1 * 32 + 29)
|
|
#define GPIO_COB_TEST (1 * 32 + 30)
|
|
|
|
#define GPIO_KEYOUT_BASE (2 * 32 + 10)
|
|
#define GPIO_KEYIN_BASE (3 * 32 + 18)
|
|
#define GPIO_KEYIN_8 (3 * 32 + 26)
|
|
|
|
#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */
|
|
#define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */
|
|
|
|
#endif /* __CONFIG_NANONOTE_H */
|