qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-29 00:57:31 +02:00
Code
c16fafb1df
openwrt-xburst/target/linux/xburst/patches-2.6.25/010-add-qi_lb60.patch

384 lines
12 KiB
Diff
Raw Blame History

diff -ruN linux-2.6.25.20.owrt.qi/arch/mips/jz4740/board-qi_lb60.c linux-2.6.25.20.owrt.qi.mod/arch/mips/jz4740/board-qi_lb60.c
--- linux-2.6.25.20.owrt.qi/arch/mips/jz4740/board-qi_lb60.c 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.25.20.owrt.qi.mod/arch/mips/jz4740/board-qi_lb60.c 2009-08-06 22:20:19.000000000 +0200
@@ -0,0 +1,110 @@
+/*
+ * linux/arch/mips/jz4740/board-qi_lb60.c
+ *
+ * QI_LB60 setup routines.
+ *
+ * Copyright (c) 2009 Qi Hardware inc.,
+ * Author: Xiangfu Liu <xiangfu@qi-hardware.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 3 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/delay.h>
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+
+#include <asm/jzsoc.h>
+
+extern void (*jz_timer_callback)(void);
+
+static void dancing(void)
+{
+ static unsigned int count = 0;
+
+ count ++;
+ count &= 1;
+ if (count)
+ __gpio_set_pin(GPIO_LED_EN);
+ else
+ __gpio_clear_pin(GPIO_LED_EN);
+}
+
+static void pi_timer_callback(void)
+{
+ static unsigned long count = 0;
+
+ if ((++count) % 50 == 0) {
+ dancing();
+ count = 0;
+ }
+}
+
+static void __init board_cpm_setup(void)
+{
+ /* Stop unused module clocks here.
+ * We have started all module clocks at arch/mips/jz4740/setup.c.
+ */
+}
+
+static void __init board_gpio_setup(void)
+{
+ /*
+ * Most of the GPIO pins should have been initialized by the boot-loader
+ */
+
+ /*
+ * Initialize MSC pins
+ */
+ /* __gpio_as_msc(); */
+
+ /*
+ * Initialize LCD pins
+ */
+ /* __gpio_as_lcd_18bit(); */
+
+ /*
+ * Initialize SSI pins
+ */
+ /* __gpio_as_ssi(); */
+
+ /*
+ * Initialize I2C pins
+ */
+ /* __gpio_as_i2c(); */
+
+ /*
+ * Initialize Other pins
+ */
+ __gpio_as_output(GPIO_SD_VCC_EN_N);
+ __gpio_disable_pull(GPIO_SD_VCC_EN_N);
+ __gpio_clear_pin(GPIO_SD_VCC_EN_N);
+
+ __gpio_as_input(GPIO_SD_CD_N);
+ __gpio_disable_pull(GPIO_SD_CD_N);
+
+ __gpio_as_input(GPIO_SD_WP);
+ __gpio_disable_pull(GPIO_SD_WP);
+
+ __gpio_as_input(GPIO_DC_DETE_N);
+ __gpio_as_input(GPIO_CHARG_STAT_N);
+}
+
+void __init jz_board_setup(void)
+{
+ printk("Qi Hardware JZ4740 QI_LB60 setup\n");
+
+ board_cpm_setup();
+ board_gpio_setup();
+
+ jz_timer_callback = pi_timer_callback;
+}
diff -ruN linux-2.6.25.20.owrt.qi/arch/mips/jz4740/Makefile linux-2.6.25.20.owrt.qi.mod/arch/mips/jz4740/Makefile
--- linux-2.6.25.20.owrt.qi/arch/mips/jz4740/Makefile 2009-08-05 03:02:12.000000000 +0200
+++ linux-2.6.25.20.owrt.qi.mod/arch/mips/jz4740/Makefile 2009-08-06 19:01:25.000000000 +0200
@@ -16,6 +16,7 @@
obj-$(CONFIG_JZ4740_LYRA) += board-lyra.o
obj-$(CONFIG_JZ4725_DIPPER) += board-dipper.o
obj-$(CONFIG_JZ4720_VIRGO) += board-virgo.o
+obj-$(CONFIG_JZ4740_QI_LB60) += board-qi_lb60.o
# PM support
diff -ruN linux-2.6.25.20.owrt.qi/arch/mips/Kconfig linux-2.6.25.20.owrt.qi.mod/arch/mips/Kconfig
--- linux-2.6.25.20.owrt.qi/arch/mips/Kconfig 2009-08-05 03:02:12.000000000 +0200
+++ linux-2.6.25.20.owrt.qi.mod/arch/mips/Kconfig 2009-08-06 18:56:17.000000000 +0200
@@ -18,6 +18,14 @@
prompt "System type"
default SGI_IP22
+config JZ4740_QI_LB60
+ bool "Ingenic JZ4740 QI_LB60 board"
+ select DMA_NONCOHERENT
+ select SYS_HAS_CPU_MIPS32_R1
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select SOC_JZ4740
+
config JZ4730_PMP
bool "Ingenic JZ4730 PMP board"
select DMA_NONCOHERENT
diff -ruN linux-2.6.25.20.owrt.qi/drivers/mtd/nand/jz4740_nand.c linux-2.6.25.20.owrt.qi.mod/drivers/mtd/nand/jz4740_nand.c
--- linux-2.6.25.20.owrt.qi/drivers/mtd/nand/jz4740_nand.c 2009-08-05 03:02:12.000000000 +0200
+++ linux-2.6.25.20.owrt.qi.mod/drivers/mtd/nand/jz4740_nand.c 2009-08-06 19:06:45.000000000 +0200
@@ -278,6 +278,53 @@
20, /* reserved blocks of mtd4 */
20}; /* reserved blocks of mtd5 */
#endif /* CONFIG_JZ4720_VIRGO */
+
+#ifdef CONFIG_JZ4740_QI_LB60
+static struct mtd_partition partition_info[] = {
+ { name: "NAND BOOT partition",
+ offset: 0 * 0x100000,
+ size: 4 * 0x100000,
+ use_planes: 0 },
+ { name: "NAND KERNEL partition",
+ offset: 4 * 0x100000,
+ size: 4 * 0x100000,
+ use_planes: 0 },
+ { name: "NAND ROOTFS partition",
+ offset: 8 * 0x100000,
+ size: 504 * 0x100000,
+ use_planes: 0 },
+ { name: "NAND DATA1 partition",
+ offset: 512 * 0x100000,
+ size: 512 * 0x100000,
+ use_planes: 1 },
+ { name: "NAND DATA2 partition",
+ offset: 1024 * 0x100000,
+ size: 512 * 0x100000,
+ use_planes: 1 },
+ { name: "NAND VFAT partition",
+ offset: (1024 + 512) * 0x100000,
+ size: 512 * 0x100000,
+ use_planes: 1 },
+};
+
+/* Define max reserved bad blocks for each partition.
+ * This is used by the mtdblock-jz.c NAND FTL driver only.
+ *
+ * The NAND FTL driver reserves some good blocks which can't be
+ * seen by the upper layer. When the bad block number of a partition
+ * exceeds the max reserved blocks, then there is no more reserved
+ * good blocks to be used by the NAND FTL driver when another bad
+ * block generated.
+ */
+static int partition_reserved_badblocks[] = {
+ 2, /* reserved blocks of mtd0 */
+ 2, /* reserved blocks of mtd1 */
+ 10, /* reserved blocks of mtd2 */
+ 10, /* reserved blocks of mtd3 */
+ 10, /* reserved blocks of mtd4 */
+ 20}; /* reserved blocks of mtd5 */
+#endif /* CONFIG_JZ4740_QI_LB60 */
+
/*-------------------------------------------------------------------------
* Following three functions are exported and used by the mtdblock-jz.c
* NAND FTL driver only.
diff -ruN linux-2.6.25.20.owrt.qi/drivers/video/jzlcd.c linux-2.6.25.20.owrt.qi.mod/drivers/video/jzlcd.c
--- linux-2.6.25.20.owrt.qi/drivers/video/jzlcd.c 2009-08-05 03:02:12.000000000 +0200
+++ linux-2.6.25.20.owrt.qi.mod/drivers/video/jzlcd.c 2009-08-06 22:23:39.000000000 +0200
@@ -126,15 +126,18 @@
MODE_TFT_GEN | HSYNC_N | VSYNC_N | PCLK_N | DE_N,
320, 240, 16, 60, 3, 3, 3, 3, 3, 85 /* 320x240 */
#endif
-#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) && defined(CONFIG_JZ4740_PAVO)
- MODE_TFT_GEN | HSYNC_N | VSYNC_N | MODE_TFT_18BIT | PCLK_N,
-// 320, 240, 18, 110, 1, 1, 10, 50, 10, 13
- 320, 240, 18, 80, 1, 1, 10, 50, 10, 13
-#endif
-#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) && !(defined(CONFIG_JZ4740_PAVO))
- MODE_TFT_GEN | HSYNC_N | VSYNC_N | PCLK_N,
- 320, 240, 16, 110, 1, 1, 10, 50, 10, 13
-#endif
+#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01)
+ #if defined(CONFIG_JZ4740_PAVO)
+ MODE_TFT_GEN | HSYNC_N | VSYNC_N | MODE_TFT_18BIT | PCLK_N,
+ 320, 240, 18, 80, 1, 1, 10, 50, 10, 13
+ #elif defined(CONFIG_JZ4740_QI_LB60)
+ MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N,
+ 320, 240, 32, 70, 1, 1, 273, 140, 1, 20
+ #else
+ MODE_TFT_GEN | HSYNC_N | VSYNC_N | PCLK_N,
+ 320, 240, 16, 110, 1, 1, 10, 50, 10, 13
+ #endif
+#endif /* CONFIG_JZLCD_FOXCONN_PT035TN01 */
#if defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N,
320, 240, 32, 60, 1, 1, 10, 50, 10, 13
@@ -1523,7 +1526,7 @@
cfb->pm->data = cfb;
#endif
- __lcd_display_on();
+ __lcd_display_off();
return 0;
diff -ruN linux-2.6.25.20.owrt.qi/drivers/video/jzlcd.h linux-2.6.25.20.owrt.qi.mod/drivers/video/jzlcd.h
--- linux-2.6.25.20.owrt.qi/drivers/video/jzlcd.h 2009-08-05 03:02:12.000000000 +0200
+++ linux-2.6.25.20.owrt.qi.mod/drivers/video/jzlcd.h 2009-08-06 22:29:03.000000000 +0200
@@ -363,7 +363,11 @@
#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) || defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) /* board pmp */
-#define MODE 0xcd /* 24bit parellel RGB */
+ #if defined(CONFIG_JZ4740_QI_LB60)
+ #define MODE 0xc9
+ #else
+ #define MODE 0xcd /* 24bit parellel RGB */
+ #endif
#endif
#if defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
#define MODE 0xc9 /* 8bit serial RGB */
@@ -384,6 +388,11 @@
#define SPCK (32*1+17) //LCD_CLS
#define SPDA (32*2+12) //LCD_D12
#define LCD_RET (32*2+23) //LCD_REV, GPC23
+#elif defined(CONFIG_JZ4740_QI_LB60)
+ #define SPEN (32*2+21) //LCD_SPL
+ #define SPCK (32*2+23) //LCD_CLS
+ #define SPDA (32*2+22) //LCD_D12
+ #define LCD_RET (32*3+27)
#if 0 /*old driver*/
#define SPEN (32*1+18) //LCD_SPL
#define SPCK (32*1+17) //LCD_CLS
@@ -655,7 +663,7 @@
/*#if defined(CONFIG_JZ4740_LEO) || defined(CONFIG_JZ4740_PAVO)*/
#if defined(CONFIG_SOC_JZ4740)
-#if defined(CONFIG_JZ4740_PAVO) || defined(CONFIG_JZ4740_LYRA)
+#if defined(CONFIG_JZ4740_PAVO) || defined(CONFIG_JZ4740_LYRA) || defined(CONFIG_JZ4740_QI_LB60)
#define GPIO_PWM 123 /* GP_D27 */
#define PWM_CHN 4 /* pwm channel */
#define PWM_FULL 101
@@ -725,7 +733,7 @@
do { \
__gpio_set_pin(GPIO_DISP_OFF_N); \
__lcd_special_on(); \
- __lcd_set_backlight_level(80); \
+ __lcd_set_backlight_level(20); \
} while (0)
#define __lcd_display_off() \
diff -ruN linux-2.6.25.20.owrt.qi/include/asm-mips/mach-jz4740/board-qi_lb60.h linux-2.6.25.20.owrt.qi.mod/include/asm-mips/mach-jz4740/board-qi_lb60.h
--- linux-2.6.25.20.owrt.qi/include/asm-mips/mach-jz4740/board-qi_lb60.h 1970-01-01 01:00:00.000000000 +0100
+++ linux-2.6.25.20.owrt.qi.mod/include/asm-mips/mach-jz4740/board-qi_lb60.h 2009-08-06 22:11:42.000000000 +0200
@@ -0,0 +1,79 @@
+/*
+ * linux/include/asm-mips/mach-jz4740/board-qi_lb60.h
+ *
+ * Copyright (c) 2009 Qi Hardware inc.,
+ * Author: Xiangfu Liu <xiangfu@qi-hardware.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 3 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_JZ4740_QI_LB60_H__
+#define __ASM_JZ4740_QI_LB60_H__
+
+/*
+ * Frequencies of on-board oscillators
+ */
+#define JZ_EXTAL 12000000 /* Main extal freq: 12 MHz */
+#define JZ_EXTAL2 32768 /* RTC extal freq: 32.768 KHz */
+
+/*
+ * GPIO
+ */
+#define GPIO_DC_DETE_N (2 * 32 + 26)
+#define GPIO_CHARG_STAT_N (2 * 32 + 27)
+#define GPIO_LED_EN (2 * 32 + 28)
+#define GPIO_LCD_CS (2 * 32 + 21)
+#define GPIO_DISP_OFF_N (3 * 32 + 21)
+#define GPIO_PWM (3 * 32 + 27)
+
+#define GPIO_AMP_EN (3 * 32 + 4)
+
+#define GPIO_SD_CD_N (3 * 32 + 0)
+#define GPIO_SD_VCC_EN_N (3 * 32 + 2)
+#define GPIO_SD_WP (3 * 32 + 16)
+
+#define GPIO_USB_DETE (3 * 32 + 28)
+#define GPIO_BUZZ_PWM (3 * 32 + 27)
+#define GPIO_UDC_HOTPLUG GPIO_USB_DETE
+
+#define GPIO_AUDIO_POP (1 * 32 + 29)
+#define GPIO_COB_TEST (1 * 32 + 30)
+
+#define GPIO_KEYOUT_BASE (2 * 32 + 10)
+#define GPIO_KEYIN_BASE (3 * 32 + 18)
+#define GPIO_KEYIN_8 (3 * 32 + 26)
+
+/*
+ * MMC/SD
+ */
+#define MSC_WP_PIN GPIO_SD_WP
+#define MSC_HOTPLUG_PIN GPIO_SD_CD_N
+#define MSC_HOTPLUG_IRQ (IRQ_GPIO_0 + GPIO_SD_CD_N)
+
+#define __msc_init_io() \
+do { \
+ __gpio_as_output(GPIO_SD_VCC_EN_N); \
+ __gpio_as_input(GPIO_SD_CD_N); \
+} while (0)
+
+#define __msc_enable_power() \
+do { \
+ __gpio_clear_pin(GPIO_SD_VCC_EN_N); \
+} while (0)
+
+#define __msc_disable_power() \
+do { \
+ __gpio_set_pin(GPIO_SD_VCC_EN_N); \
+} while (0)
+
+#define __msc_card_detected(s) \
+({ \
+ int detected = 1; \
+ if (!__gpio_get_pin(GPIO_SD_CD_N)) \
+ detected = 0; \
+ detected; \
+})
+
+#endif /* __ASM_JZ4740_QI_LB60_H__ */
diff -ruN linux-2.6.25.20.owrt.qi/include/asm-mips/mach-jz4740/jz4740.h linux-2.6.25.20.owrt.qi.mod/include/asm-mips/mach-jz4740/jz4740.h
--- linux-2.6.25.20.owrt.qi/include/asm-mips/mach-jz4740/jz4740.h 2009-08-05 03:02:12.000000000 +0200
+++ linux-2.6.25.20.owrt.qi.mod/include/asm-mips/mach-jz4740/jz4740.h 2009-08-06 19:00:15.000000000 +0200
@@ -43,6 +43,10 @@
#include <asm/mach-jz4740/board-virgo.h>
#endif
+#ifdef CONFIG_JZ4740_QI_LB60
+#include <asm/mach-jz4740/board-qi_lb60.h>
+#endif
+
/* Add other platform definition here ... */
View Git Blame Copy Permalink