mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-02 16:11:05 +02:00
c8a92d23e8
rssileds is a small user-space process to control LEDs by polling the signal quality reported by a WiFi interface. By using the iwinfo library, rssileds is independent of the WiFi driver used. It supports pwm controlled LEDs and may by used to nicely fade through all colors in real-time of the rainbow while only wasting very little CPU time and a small constant amount of system memory. An example configuration for the ALL0258N will follow in the next patch. This is a slightly improved version of rssileds, now quality values are in percent and stuff is written to syslog. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33163 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Run "./scripts/feeds update" to get the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install" to install symlinks into "package/feeds/*". Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org