mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-03 00:31:06 +02:00
d1f331bc79
use __gpio_jtag_to_uart0() instread of direct write value to GPIO. this __gpio_jtag_to_uart0() init the tp4 and tp5 of NanoNote to serial console. it's same with the serial console under battery, but which not share gpio with keyboard. Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org