mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-04-21 12:27:27 +03:00
d3ca1d22b3
The ASUS WL-330N and WL-330N3G has the MAC address stored at offset 4, not 40. This is verified by reading original ASUS firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and GPL_WL-330N_source.1021/user/rc/common_ex.c. Tested on WL-330N3G, it now gets the same MAC as is printed on the label on the router. Signed-off-by: Jan Kardell <jan.kardell@arkub.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34877 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Run "./scripts/feeds update" to get the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install" to install symlinks into "package/feeds/*". Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org