mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-23 12:14:43 +02:00
ee25f77757
because some programs to be run on the host use malloc.h in an incompatible way. package/iproute2/patches/004-darwin_fixes.patch has a fix for Darwin, however the fix can be made to work on other BSD platforms by changing the patch as below. I think a similar approach should work for other BSD-derived platforms, replacing the #ifndef __APPLE__ with #if !defined(__APPLE__) && !defined(__FreeBSD__) && !defined(...) or perhaps even with just #ifdef __linux__ if the set of platforms where malloc.h is ok is small or restricted to just linux In any case, the patch is below. (#3869) Signed-off-by: Luigi Rizzo <rizzo@iet.unipi.it> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12249 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, bison, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org