mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-27 06:37:57 +02:00
f0d9d1c41e
Previously hostapd created one control interface /var/run/hostapd-phyX which only contained the first virtual bssid (for example wlan0). In order to access the other virtual bssids with hostapd_cli add all virtual bssids to /var/run/hostapd-phyX by specifying the ctrl_interface parameter per bssid. Previously the control interface looked like: /var/run/hostapd-phyX/wlan0 Now, the control interface looks like this: /var/run/hostapd-phyX/wlan0 /var/run/hostapd-phyX/wlan1 ... Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24985 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org