qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-24 05:57:32 +02:00
Code
OpenWrt XBurst, development environment for Qi Hardware device. http://projects.qi-hardware.com/index.php/p/openwrt-xburst/
9,663 Commits 13 Branches 0 Tags 117 MiB
C 81.3%
Makefile 7.4%
Roff 3.9%
Shell 3.3%
Assembly 2%
Other 1.9%
f2a4b6b5a6
Go to file
juhosg f2a4b6b5a6 [adm5120] use a shadow value for the write-only GPIO_CONF2 register 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-12-12 12:42:40 +00:00
docs Allow specifying static IPv6 gateways (#2710) 2007-11-16 07:27:59 +00:00
include add prereq check for gnu find 2007-12-11 22:28:10 +00:00
package [adm5120] new experimental driver for the CF slot on the RouterBOARD 153 2007-12-11 09:00:06 +00:00
scripts fix a warning 2007-12-07 10:32:48 +00:00
target [adm5120] use a shadow value for the write-only GPIO_CONF2 register 2007-12-12 12:42:40 +00:00
toolchain fix a few stampfile locations 2007-11-20 19:58:49 +00:00
tools Use $(CP) instead of $(INSTALL_BIN) for binaries. 2007-12-09 18:53:06 +00:00
.gitignore add package/feeds to .gitignore 2007-10-13 02:05:06 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add external kernel tree support 2007-11-20 13:21:01 +00:00
feeds.conf add initial version of a package feeds management script 2007-09-23 02:39:01 +00:00
LICENSE rename GPL to LICENSE 2005-08-13 12:29:03 +00:00
Makefile fix make clean for unconfigured build trees 2007-12-04 03:04:37 +00:00
README add information about the tex4ht requirement for the docs 2007-02-26 01:06:41 +00:00
rules.mk fix hostapd rebuild check, isolate the common src/ directory for hostapd variants as well to fix compile errors when both variants are selected (#2722) 2007-11-17 14:14:16 +00:00

README 

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org