mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-01-29 02:11:05 +02:00
f6dc56506d
* Fixed output-buffer-overflow bug in uh_urlencode() and uh_urldecode() [tested input-buffer index against output-buffer length]. In reality, this would not typically cause an overflow on decode, where the output string would be expected to be shorter than the input string; and uh_urlencode() seems to have been unreferenced in the source. * Fixed bug: uh_urlencode() and uh_urldecode() both read one extra byte from the input-string. While this could manifest in C code, the result was most egregious when called from Lua, where it caused an extra null byte to be embedded at the end of the output string. * uh_urlencode() cleanup: removed redundant bitwise-and. Signed-off-by: David Favro <openwrt@meta-dynamic.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31569 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Run "./scripts/feeds update" to get the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install" to install symlinks into "package/feeds/*". Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org