mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-02-02 18:21:06 +02:00
f80deda3fe
The genext2fs tool will 'reserve' 5% of the image size by default, apparently by creating a huge lost+found directory. In fact it seemed to be much more than 5% in practice — I saw an image with 8MiB used, and recovered about 2MiB of it by deleting the 'empty' lost+found directory: /dev/loop0 48377 8482 37438 19% /mnt/spare # rmdir lost+found/ /dev/loop0 48377 6014 39906 14% /mnt/spare This makes it configurable, but leaves it at the genext2fs default of 5% for now. It should probably be changed to default to zero, but that can be a separate patch. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34408 3c298f89-4303-0410-b956-a3cf2f4a3e73
This is the buildsystem for the OpenWrt Linux distribution. Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Run "./scripts/feeds update" to get the latest package definitions defined in feeds.conf / feeds.conf.default respectively and "./scripts/feeds install" to install symlinks into "package/feeds/*". Use "make menuconfig" to configure your image. Simply running "make" will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use "scripts/flashing/flash.sh" for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type "make -C docs/" to build it. To build your own firmware you need to have access to a Linux, BSD or MacOSX system (case-sensitive filesystem required). Cygwin will not be supported because of the lack of case sensitiveness in the file system. Sunshine! Your OpenWrt Project http://openwrt.org