mirror of
git://projects.qi-hardware.com/xue.git
synced 2024-09-07 13:26:47 +03:00
.. | ||
128Mb_mobile_ddr_parameters.vh | ||
256Mb_mobile_ddr_parameters.vh | ||
512Mb_mobile_ddr_parameters.vh | ||
1024Mb_mobile_ddr_parameters.vh | ||
2048Mb_mobile_ddr_parameters.vh | ||
mobile_ddr_mcp.v | ||
mobile_ddr.v | ||
readme.txt | ||
subtest.vh | ||
tb.do | ||
tb.v |
Disclaimer of Warranty: ----------------------- This software code and all associated documentation, comments or other information (collectively "Software") is provided "AS IS" without warranty of any kind. MICRON TECHNOLOGY, INC. ("MTI") EXPRESSLY DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. MTI DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. FURTHERMORE, MTI DOES NOT MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. THE ENTIRE RISK ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE REMAINS WITH YOU. IN NO EVENT SHALL MTI, ITS AFFILIATED COMPANIES OR THEIR SUPPLIERS BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR SPECIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF YOUR USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF MTI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Because some jurisdictions prohibit the exclusion or limitation of liability for consequential or incidental damages, the above limitation may not apply to you. Copyright 2008 Micron Technology, Inc. All rights reserved. Getting Started: ---------------- Unzip the included files to a folder. Compile mobile_ddr.v and tb.v using a verilog simulator. Simulate the top level test bench tb. Or, if you are using the ModelSim simulator, type "do tb.do" at the prompt. File Descriptions: ------------------ mobile_ddr.v --mobile ddr model mobile_ddr_mcp.v --structural wrapper for mobile_ddr multi-chip package model 128Mb_mobile_ddr_parameters.vh --File that contains all parameters used by the model 256Mb_mobile_ddr_parameters.vh --File that contains all parameters used by the model 512Mb_mobile_ddr_parameters.vh --File that contains all parameters used by the model 1024Mb_mobile_ddr_parameters.vh --File that contains all parameters used by the model 2048Mb_mobile_ddr_parameters.vh --File that contains all parameters used by the model readme.txt --This file tb.v --Test bench tb.do --File that compiles and runs the above files Defining the Density (part size): ------------------------- The verilog compiler directive "`define" may be used to choose between on of the densities supported by the mobile ddr model. Allowable densities are listed in the *.vh file. The density is used to select a set of bank, row, column, and timing parameters for the mobile ddr model. The following are examples of defining the density. simulator command line --------- ------------ ModelSim vlog +define+den512Mb mobile_ddr.v VCS vcs +define+den512Mb mobile_ddr.v NC-Verilog ncverilog +define+den512Mb mobile_ddr.v Defining the Speed Grade: ------------------------- The verilog compiler directive "`define" may be used to choose between multiple speed grades supported by the mobile ddr model. Allowable speed grades are listed in the mobile_ddr_parameters.vh file and begin with the letters "sg". The speed grade is used to select a set of timing parameters for the mobile ddr model. The following are examples of defining the speed grade. simulator command line --------- ------------ ModelSim vlog +define+sg75 mobile_ddr.v VCS vcs +define+sg75 mobile_ddr.v NC-Verilog ncverilog +define+sg75 mobile_ddr.v Defining the Organization: -------------------------- The verilog compiler directive "`define" may be used to choose between multiple organizations supported by the mobile ddr model. Valid organizations include "x16" and "x32", and are listed in the mobile_ddr_parameters.vh file. The organization is used to select the amount of memory and the port sizes of the mobile ddr model. The following are examples of defining the organization. vlog +define+x16 mobile_ddr.v simulator command line --------- ------------ ModelSim vlog +define+x16 mobile_ddr.v VCS vcs +define+x16 mobile_ddr.v NC-Verilog ncverilog +define+x16 mobile_ddr.v All combinations of speed grade and organization are considered valid by the mobile ddr model even though a Micron part may not exist for every combination. Allocating Memory: ------------------ An associative array has been implemented to reduce the amount of static memory allocated by the mobile ddr model. The number of entries in the associative array is controlled by the part_mem_bits parameter, and is equal to 2^part_mem_bits. For example, if the part_mem_bits parameter is equal to 10, the associative array will be large enough to store 1024 write data transfers to unique addresses. The following are examples of setting the MEM_BITS parameter to 8. simulator command line --------- ------------ ModelSim vsim -Gpart_mem_bits=8 mobile_ddr VCS vcs -pvalue+part_mem_bits=8 mobile_ddr.v NC-Verilog ncverilog +defparam+mobile_ddr.part_mem_bits=8 mobile_ddr.v It is possible to allocate memory for every address supported by the mobile ddr model by using the verilog compiler directive "`define FULL_MEM". This procedure will improve simulation performance at the expense of system memory. The following are examples of allocating memory for every address. Simulator command line --------- ------------ ModelSim vlog +define+FULL_MEM mobile_ddr.v VCS vcs +define+FULL_MEM mobile_ddr.v NC-Verilog ncverilog +define+FULL_MEM mobile_ddr.v Reduced Page Mode: ------------------ Mobile DDR 256Mb, 512Mb, and 1024Mb part may be built with the reduced page size architecture. This part is accessed with the +define+RP designator. RP parts have one extra row bit and one less column bit effectively cutting the page size in half but doubling the number of rows keeping total part size the same. Part Size Valid RP Designators --------- -------------------- 256Mb +define+RP 512Mb +define+RP 1024Mb +define+RP Simulator command line --------- ------------ ModelSim vlog +define+RP mobile_ddr.v VCS vcs +define+RP mobile_ddr.v NC-Verilog ncverilog +define+RP mobile_ddr.v Multi-Chip Package Model: ------------------------- The 1024Mb model can be supported in a Multi Chip Package, that allows multiple die models in one structural package. The number of ranks and chip selects of the mcp can be configured by using the `DUAL_RANK define on the simulator call line. The currently supported configurations are listed below: Package Configuration Valid MCP Designator --------------------- -------------------- 2 Chip Selects, 2 Die +define+DUAL_RANK 2 Chip Selects, 1 Die (default) The single rank mcp is the default. In order to simulate the DUAL_RANK model, the define needs to be added: Simulator command line --------- ------------ ModelSim vlog +define+DUAL_RANK mobile_ddr.v mobile_ddr_mcp.v VCS vcs +define+DUAL_RANK mobile_ddr.v mobile_ddr_mcp.v NC-Verilog ncverilog +define+DUAL_RANK mobile_ddr.v mobile_ddr_mcp.v