RDNIS skeleton

This commit is contained in:
Arti Zirk 2021-10-01 18:48:38 +03:00
parent 6da0f2cf8f
commit cdeb194c7a
9 changed files with 230 additions and 47 deletions

View File

@ -22,7 +22,7 @@ add_compile_definitions(
DEBUG
TARGETS=stm32/f1
)
add_executable(usbtest src/main.c src/util.c src/cdcacm.c)
add_executable(usbtest src/main.c src/util.c src/cdcacm.c src/rndis.c src/rndis.h)
set_target_properties(usbtest PROPERTIES SUFFIX .elf)

View File

@ -2,7 +2,7 @@
source [find interface/stlink.cfg]
source [find target/stm32f1x.cfg]
#reset_config srst_only
reset_config combined
# Search for RTT string from start of RAM
rtt setup 0x20000000 8192 "SEGGER RTT"

View File

@ -18,8 +18,6 @@
*/
#include <stdlib.h>
#include <libopencm3/stm32/rcc.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/usb/usbd.h>
#include <libopencm3/usb/cdc.h>
@ -168,16 +166,16 @@ static const char *usb_strings[] = {
};
/* Buffer to be used for control requests. */
uint8_t usbd_control_buffer[128];
static uint8_t usbd_control_buffer[128];
static enum usbd_request_return_codes cdcacm_control_request(usbd_device *usbd_dev, struct usb_setup_data *req, uint8_t **buf,
uint16_t *len, void (**complete)(usbd_device *usbd_dev, struct usb_setup_data *req))
{
(void)complete;
(void)buf;
(void)usbd_dev;
(void)complete;
(void)buf;
(void)usbd_dev;
switch (req->bRequest) {
switch (req->bRequest) {
case USB_CDC_REQ_SET_CONTROL_LINE_STATE: {
/*
* This Linux cdc_acm driver requires this to be implemented
@ -202,8 +200,8 @@ static enum usbd_request_return_codes cdcacm_control_request(usbd_device *usbd_d
if (*len < sizeof(struct usb_cdc_line_coding))
return USBD_REQ_NOTSUPP;
return USBD_REQ_HANDLED;
}
return USBD_REQ_NOTSUPP;
}
return USBD_REQ_NOTSUPP;
}
static void cdcacm_data_rx_cb(usbd_device *usbd_dev, uint8_t ep)
@ -238,46 +236,15 @@ static void cdcacm_set_config(usbd_device *usbd_dev, uint16_t wValue)
cdcacm_control_request);
}
void start_cdcacm(void) {
int i;
usbd_device *start_cdcacm(void) {
usbd_device *usbd_dev;
//SCB_VTOR = (uint32_t) 0x08005000;
SEGGER_RTT_printf(0, "Configuring USB CDC-ACM device\n");
rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSE8_72MHZ]);
rcc_periph_clock_enable(RCC_GPIOB);
/* Setup GPIOB Pin 9 to pull up the D+ high, so autodect works
* with the bootloader. The circuit is active high. */
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_OPENDRAIN, GPIO9);
gpio_set(GPIOB, GPIO9);
/* Setup GPIOB Pin 1 for the LED */
gpio_set(GPIOB, GPIO1);
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO1);
SEGGER_RTT_printf(0, "Starting USB\n");
rcc_periph_clock_enable(RCC_AFIO);
rcc_periph_clock_enable(RCC_OTGFS);
usbd_dev = usbd_init(&st_usbfs_v1_usb_driver, &dev, &config,
usb_strings, 3,
usbd_control_buffer, sizeof(usbd_control_buffer));
usbd_register_set_config_callback(usbd_dev, cdcacm_set_config);
for (i = 0; i < 0x800000; i++)
__asm__("nop");
gpio_clear(GPIOB, GPIO9);
SEGGER_RTT_printf(0, "Main loop\n");
while (1) {
usbd_poll(usbd_dev);
gpio_toggle(GPIOB, GPIO1);
}
return usbd_dev;
}

View File

@ -1,6 +1,6 @@
#ifndef USBTEST_CDCACM_H
void start_cdcacm(void);
usbd_device *start_cdcacm(void);
#define USBTEST_CDCACM_H

View File

@ -1,8 +1,48 @@
#include <libopencm3/stm32/rcc.h>
#include <libopencm3/stm32/gpio.h>
#include <libopencm3/usb/usbd.h>
#include <SEGGER_RTT.h>
#include "cdcacm.h"
#include "rndis.h"
int main(void) {
usbd_device *usbd_dev;
SEGGER_RTT_printf(0, "Hello World\n");
start_cdcacm();
rcc_clock_setup_pll(&rcc_hse_configs[RCC_CLOCK_HSE8_72MHZ]);
rcc_periph_clock_enable(RCC_GPIOB);
/* Setup GPIOB Pin 9 to pull up the D+ high, so autodect works
* with the bootloader. The circuit is active high. */
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_OPENDRAIN, GPIO9);
/* Setup GPIOB Pin 1 for the LED */
gpio_set(GPIOB, GPIO1);
gpio_set_mode(GPIOB, GPIO_MODE_OUTPUT_2_MHZ,
GPIO_CNF_OUTPUT_PUSHPULL, GPIO1);
SEGGER_RTT_printf(0, "Starting USB\n");
rcc_periph_clock_enable(RCC_AFIO);
rcc_periph_clock_enable(RCC_OTGFS);
usbd_dev = start_rdnis();
SEGGER_RTT_printf(0, "Main loop\n");
while (1) {
usbd_poll(usbd_dev);
gpio_toggle(GPIOB, GPIO1);
}
return 0;
}

158
src/rndis.c Normal file
View File

@ -0,0 +1,158 @@
#include <stdlib.h>
#include <libopencm3/usb/usbd.h>
#include <libopencm3/usb/cdc.h>
#include <SEGGER_RTT.h>
#include "rndis.h"
/* Buffer to be used for control requests. */
static uint8_t usbd_control_buffer[128];
static const struct usb_device_descriptor dev = {
.bLength = USB_DT_DEVICE_SIZE,
.bDescriptorType = USB_DT_DEVICE,
.bcdUSB = 0x0200,
.bDeviceClass = 0xE0, // Wireless Controller
.bDeviceSubClass = 0,
.bDeviceProtocol = 0,
.bMaxPacketSize0 = 64,
.idVendor = 0x4E44,
.idProduct = 0x4953,
.bcdDevice = 0xffff,
.iManufacturer = 1,
.iProduct = 2,
.iSerialNumber = 3,
.bNumConfigurations = 1,
};
static const struct usb_endpoint_descriptor comm_endp[] = {{
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x81,
.bmAttributes = USB_ENDPOINT_ATTR_INTERRUPT,
.wMaxPacketSize = 8,
.bInterval = 255,
}};
static const struct {
struct usb_cdc_header_descriptor header;
struct usb_cdc_call_management_descriptor call_mgmt;
struct usb_cdc_acm_descriptor acm;
struct usb_cdc_union_descriptor cdc_union;
} __attribute__((packed)) cdcacm_functional_descriptors = {
.header = {
.bFunctionLength = sizeof(struct usb_cdc_header_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_HEADER,
.bcdCDC = 0x0110,
},
.call_mgmt = {
.bFunctionLength =
sizeof(struct usb_cdc_call_management_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_CALL_MANAGEMENT,
.bmCapabilities = 0,
.bDataInterface = 1,
},
.acm = {
.bFunctionLength = sizeof(struct usb_cdc_acm_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_ACM,
.bmCapabilities = 0,
},
.cdc_union = {
.bFunctionLength = sizeof(struct usb_cdc_union_descriptor),
.bDescriptorType = CS_INTERFACE,
.bDescriptorSubtype = USB_CDC_TYPE_UNION,
.bControlInterface = 0,
.bSubordinateInterface0 = 1,
},
};
// RNDIS Communications Control
static const struct usb_interface_descriptor comm_iface[] = {{
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 1,
.bInterfaceClass = 0xE0, // Wireless Controller
.bInterfaceSubClass = 0x01,
.bInterfaceProtocol = 0x03,
.iInterface = 0,
.endpoint = comm_endp,
.extra = &cdcacm_functional_descriptors,
.extralen = sizeof(cdcacm_functional_descriptors),
}};
static const struct usb_endpoint_descriptor data_endp[] = {{
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x01,
.bmAttributes = USB_ENDPOINT_ATTR_BULK,
.wMaxPacketSize = 64,
.bInterval = 0,
}, {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 0x82,
.bmAttributes = USB_ENDPOINT_ATTR_BULK,
.wMaxPacketSize = 64,
.bInterval = 0,
}};
static const struct usb_interface_descriptor data_iface[] = {{
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = 1,
.bAlternateSetting = 0,
.bNumEndpoints = 2,
.bInterfaceClass = USB_CLASS_DATA,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = 0,
.endpoint = data_endp,
}};
static const struct usb_interface ifaces[] = {{
.num_altsetting = 1,
.altsetting = comm_iface,
}, {
.num_altsetting = 1,
.altsetting = data_iface,
}};
static const struct usb_config_descriptor config = {
.bLength = USB_DT_CONFIGURATION_SIZE,
.bDescriptorType = USB_DT_CONFIGURATION,
.wTotalLength = 0,
.bNumInterfaces = 2,
.bConfigurationValue = 1,
.iConfiguration = 0,
.bmAttributes = 0x80,
.bMaxPower = 0x32,
.interface = ifaces,
};
static const char *usb_strings[] = {
"Arti Zirk", // iManufacturer
"STM32-RNDIS", // iProduct
"lrndis demo", // iSerialNumber
};
usbd_device *start_rdnis(void) {
usbd_device *usb_dev;
usb_dev = usbd_init(
&st_usbfs_v1_usb_driver, &dev, &config,
usb_strings, 3,
usbd_control_buffer, sizeof(usbd_control_buffer)
);
return usb_dev;
}

7
src/rndis.h Normal file
View File

@ -0,0 +1,7 @@
#ifndef USBTEST_RNDIS_H
#define USBTEST_RNDIS_H
usbd_device *start_rdnis(void);
#endif //USBTEST_RNDIS_H

View File

@ -1,4 +1,7 @@
#include <libopencm3/stm32/gpio.h>
#include <SEGGER_RTT.h>
#include "delay.h"
#include "util.h"
void hexdump(char *buf, size_t size, uint32_t width) {
@ -15,3 +18,10 @@ void hexdump(char *buf, size_t size, uint32_t width) {
SEGGER_RTT_printf(0,"\n");
SEGGER_RTT_SetFlagsUpBuffer(0, SEGGER_RTT_MODE_DEFAULT);
}
void reset_usb_bus(void) {
gpio_set(GPIOB, GPIO9);
delay_ms(10);
gpio_clear(GPIOB, GPIO9);
}

View File

@ -4,5 +4,6 @@
#include <stdint.h>
void hexdump(char *buf, size_t size, uint32_t width);
void reset_usb_bus(void);
#endif //DHT_TEST_UTIL_H