Werner Almesberger
|
d16af2aa38
|
ubb-jtag/ubb-jtag-m1.sch: schematics for UBB-VGA-M1 cable
|
2013-01-04 15:09:55 -03:00 |
|
Werner Almesberger
|
1024f48093
|
ubb-jtag/: instructions for building a JTAG interface with UBB
|
2013-01-04 14:36:45 -03:00 |
|
Werner Almesberger
|
f0c6e87222
|
ubbctl/: UBB pin status decoder
|
2013-01-04 05:40:19 -03:00 |
|
Werner Almesberger
|
d33da7076c
|
README: there's much more than the blinkenlights here
|
2013-01-02 16:22:31 -03:00 |
|
Werner Almesberger
|
376aa543a9
|
lpc111x-isp/lpc111x.c: new option -P function=signal to reassign pins
|
2013-01-02 10:33:28 -03:00 |
|
Werner Almesberger
|
3b0c8c699e
|
lpc111x-isp/lpc111x.c: define IO pins via array, not #defines
|
2013-01-02 10:12:23 -03:00 |
|
Werner Almesberger
|
9ddc377969
|
libubb/README.SWUART: document the software-implemented UART
|
2012-12-31 19:30:18 -03:00 |
|
Werner Almesberger
|
6dfaeddd15
|
lpc111x-isp/lpc111x.c (start_isp): check for swuart_open failure
|
2012-12-31 19:29:35 -03:00 |
|
Werner Almesberger
|
0b81ffabd1
|
swuart-chat/chat.c (main): use perror if swuart_open fails
|
2012-12-31 19:28:46 -03:00 |
|
Werner Almesberger
|
5f3828f710
|
libubb/swuart.c: only return error codes or fail silently; don't print messages
|
2012-12-31 19:27:16 -03:00 |
|
Werner Almesberger
|
506db2d69e
|
libubb/README: describe how to get rid of competing drivers
|
2012-12-31 09:58:08 -03:00 |
|
Werner Almesberger
|
9d298216e7
|
libubb/README: document GPIO and register access
|
2012-12-31 09:44:05 -03:00 |
|
Werner Almesberger
|
49ff81fa70
|
lpc111x-isp/test/: proof of concept LED-blinking code
|
2012-12-31 03:19:59 -03:00 |
|
Werner Almesberger
|
c7a7d358bb
|
lpc111x-isp/lpc111x.c: new option -r to reset the target and let it run
|
2012-12-31 01:54:36 -03:00 |
|
Werner Almesberger
|
66d091317a
|
lpc111x-isp/lpc111x.c: if file argument is given, flash that file
|
2012-12-30 23:29:24 -03:00 |
|
Werner Almesberger
|
5246f5fbc6
|
lpc111x-isp/lpc111x.c: read and dump (to stdout) the entire Flash
|
2012-12-29 22:58:02 -03:00 |
|
Werner Almesberger
|
b2f131003d
|
lpc111x-isp/lpc111x.c: new option -n to disable powering the device
|
2012-12-29 21:18:32 -03:00 |
|
Werner Almesberger
|
be82db036f
|
libubb/swuart.c (swuart_open): don't call ubb_power
Leave all this to the libubb user.
|
2012-12-29 21:17:09 -03:00 |
|
Werner Almesberger
|
505caf997b
|
lpc111x-isp/lpc111x.c (identify): retrieve and print the chip's unique ID
|
2012-12-29 21:12:09 -03:00 |
|
Werner Almesberger
|
eda1135cb0
|
lpc111x-isp/lpc111x.c: straighten *dialog*() API; radically simplify tracing
|
2012-12-29 20:54:24 -03:00 |
|
Werner Almesberger
|
90d39d3fdd
|
lpc111x-isp/lpc111x.c: flesh out device identification
|
2012-12-29 06:27:04 -03:00 |
|
Werner Almesberger
|
0553fed424
|
lpc111x-isp/lpc111x.c: add printf-style dialog() variants
|
2012-12-28 23:26:13 -03:00 |
|
Werner Almesberger
|
c4d64fafa4
|
lpc111x-isp/lpc111x.c: option -v to control verbosity level
|
2012-12-28 23:12:37 -03:00 |
|
Werner Almesberger
|
e4f8b97e36
|
libubb/swuart.c: use mlockall to prevent page faults with interrupts off
|
2012-12-28 22:55:06 -03:00 |
|
Werner Almesberger
|
5487578ee7
|
lpc111x-isp/lpc111x.c: restructure code (WIP)
|
2012-12-28 22:45:26 -03:00 |
|
Werner Almesberger
|
eea0484a41
|
lpc111x-isp/: Ben-based in-system programmer (ISP) for NXP LPC111x chips (WIP)
Uses SWUART. This is just a "first contact" skeleton.
|
2012-12-28 21:00:28 -03:00 |
|
Werner Almesberger
|
ace55ffb37
|
swuart-chat/chat.c: open/close UBB explicitly (tracking API change)
|
2012-12-28 17:11:19 -03:00 |
|
Werner Almesberger
|
661420933e
|
libubb/swuart.c: don't open/close UBB
This way, we can set things up before and after using SWUART
|
2012-12-28 17:09:44 -03:00 |
|
Werner Almesberger
|
842766b9ed
|
libubb/swuart.c (swuart_open): start TX high, not low
|
2012-12-17 22:44:47 -03:00 |
|
Werner Almesberger
|
519ebe648c
|
swuart/: convert "hammering the peer" demo into a primitive interactive chat
Also rename directory from swuart/ to swuart-chat/, and application from
"swuart" to "chat".
|
2012-12-17 22:44:23 -03:00 |
|
Werner Almesberger
|
1c51cc6757
|
swuart/: merge library part into libubb
|
2012-12-17 22:16:32 -03:00 |
|
Werner Almesberger
|
2e749f901c
|
swuart/: split general UART functions from application
... in preparation for making it a library.
|
2012-12-17 18:43:51 -03:00 |
|
Werner Almesberger
|
b4530ffc4d
|
ioscript/ioscript: allow positions to be redefined
For that purpose, we reset the mapping each time a new set of definitions
is encountered.
|
2012-12-17 14:41:23 -03:00 |
|
Werner Almesberger
|
8816dcfa3c
|
swuart/: use a hardware timer and allow full-duplex operation
|
2012-12-17 12:31:27 -03:00 |
|
Werner Almesberger
|
4689882497
|
swuart/: half-duplex software UART for UBB (WIP)
|
2012-12-17 00:45:21 -03:00 |
|
Werner Almesberger
|
2c52dac4ca
|
libubb/: helper library for UBB access
|
2012-12-17 00:44:48 -03:00 |
|
Werner Almesberger
|
025726e48b
|
ioscript/: script-based toggling of IO pins (for device testing)
|
2012-11-06 12:05:52 -03:00 |
|
Werner Almesberger
|
a628cfa33c
|
avrduded/patches/: remove ATmega32u2 config entry
Avrdude 5.11.1 already comes with an ATmega32u2 configuration.
|
2012-07-22 13:16:12 -03:00 |
|
Werner Almesberger
|
acac482908
|
avrdude/patches/local-config.patch: new option -L to add local config files
This can be used to add project-specific programmers, such as
nanonote_atusb, nanonote_antorcha, etc.
|
2012-07-22 12:00:36 -03:00 |
|
Werner Almesberger
|
266fe49f0c
|
avrdude/patches/nanonote.patch: clean up initialization of pin_map
|
2012-07-22 10:51:09 -03:00 |
|
Werner Almesberger
|
6b838ee479
|
avrdude/: support use of CLK for regular I/O
|
2012-07-22 10:51:09 -03:00 |
|
Werner Almesberger
|
f67681360f
|
avrdude/: upgrade from avrdude-5.10 to avrdude-5.11.1
Only one trivial context mismatch. Plus a refresh of all the patches.
|
2012-07-22 10:34:42 -03:00 |
|
Werner Almesberger
|
2f65672dfc
|
avrdude/patches/nanonote.patch: fix pin inversion in nanonote.c:nanonote_getpin
|
2012-07-22 09:52:55 -03:00 |
|
Werner Almesberger
|
b0e83a9202
|
avrdude/: make patches relative to avrdude-<version> directory
This way, the path names in the patch files stay the same across
avrdude versions.
|
2012-07-22 02:37:19 -03:00 |
|
Werner Almesberger
|
9942f62cb8
|
ubb-vga/regs4740.h: add some more register locations
|
2012-07-22 02:31:38 -03:00 |
|
Werner Almesberger
|
d897d8fcac
|
ubb-usb/pin-change.fig: corrected some small errors in drawing or style
|
2011-10-05 03:43:33 -03:00 |
|
Werner Almesberger
|
f8185f4e65
|
ubb-usb/pin-change.fig: illustration of how to change multiple pins with a single write
|
2011-10-04 20:40:36 -03:00 |
|
Werner Almesberger
|
bdd95bdbf8
|
ubb-usb/Makefile: added PDF generation
|
2011-10-04 12:49:13 -03:00 |
|
Werner Almesberger
|
540f224962
|
ubb-usb/: concept drawing of simple UBB-USB hardware
|
2011-10-04 12:44:48 -03:00 |
|
Werner Almesberger
|
70ca7a5676
|
Merge branch 'master' of projects.qi-hardware.com:ben-blinkenlights
|
2011-08-14 02:55:47 -03:00 |
|