1
0
mirror of git://projects.qi-hardware.com/ben-blinkenlights.git synced 2024-12-25 21:45:12 +02:00
Blinkenlights, Demonstrate the use of the uSD slot for DIY hardware http://projects.qi-hardware.com/index.php/p/ben-blinkenlights/
Go to file
2012-12-17 00:45:21 -03:00
avrdude avrduded/patches/: remove ATmega32u2 config entry 2012-07-22 13:16:12 -03:00
bbl bbl.c (main): open /dev/mem with O_SYNC to disable caching 2011-01-03 18:31:38 -03:00
cam Initial commit. 2010-09-01 04:02:24 -03:00
ext ext/: added uSD extender board (draft) 2010-11-02 12:17:20 -03:00
ioscript ioscript/: script-based toggling of IO pins (for device testing) 2012-11-06 12:05:52 -03:00
libubb libubb/: helper library for UBB access 2012-12-17 00:44:48 -03:00
nxuart nxuart/nxuart.pro: updated for move of atmega48-mmu symbol 2011-08-14 02:48:53 -03:00
swuart swuart/: half-duplex software UART for UBB (WIP) 2012-12-17 00:45:21 -03:00
ubb usb/cam/Makefile: added dependency in Makefile itself; local parameter update 2011-03-07 13:43:36 -03:00
ubb-usb ubb-usb/pin-change.fig: corrected some small errors in drawing or style 2011-10-05 03:43:33 -03:00
ubb-vga ubb-vga/regs4740.h: add some more register locations 2012-07-22 02:31:38 -03:00
bbl.brd bbl.brd: updated 8:10-CARD to update pad type 2011-01-18 16:08:00 -03:00
bbl.cmp use 8_10-card.fpd instead of usd-card.fpd 2011-01-17 12:42:49 -03:00
bbl.pro use 8_10-card.fpd instead of usd-card.fpd 2011-01-17 12:42:49 -03:00
bbl.sch use 8_10-card.fpd instead of usd-card.fpd 2011-01-17 12:42:49 -03:00
BOOKSHELF Added simple UART 8:10 card. 2011-01-31 19:02:50 -03:00
Makefile Added simple UART 8:10 card. 2011-01-31 19:02:50 -03:00
README README: changed "uSD" to "8:10 card" 2011-01-17 12:45:42 -03:00

Ben Blinkenlights
=================

This project is a proof of concept implementation of Rikard Lindstrom's
idea of using the Ben's 8:10 card slot as a general extension interface
also for devices that don't speak MMC or SD/SDIO. The application is a
simple LED circuit, as suggested by David Samblas.

The 8:10 card slot gives access to six GPIOs, a 3.3 V supply that can
be switched on and off by software, and ground. We use a simple form of
multiplexing to drive ten LEDs with this interface.

Note that one should only light one LED at a time. If multiple LEDs are
lit, they will share the current though the common resistor, and will
thus be less bright than a single LED.