mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2025-03-21 10:38:52 +02:00
12fef1b196
Since GPIO manipulations may cause stray INT0 activity, we turn off INT0 handing on ATUSB_GPIO. The MCU must be reset to restore access to INT0. There are still issues to resolve with the GPIO test. It may turn out that there's a less invasive solution than just turning off INT0 completely. - board_app.c (gpio): mask INT0 before manipulating GPIOs - board_app.c (board_app_init): make it clearer that EIMSK is a bit mask
IEEE 802.15.4 Low-Rate Wireless Personal Area Network (WPAN) ============================================================ IEEE 802.15.4 defines physical layers and a media access control for wireless networks. ZigBee and 6loWPAN are based on IEEE 802.15.4. This project aims to add experimental WPAN functionality to the Ben NanoNote, in order to permit evaluation of overall network performance and to examine possible integration into future devices. This work is licensed under the terms detailed in the file COPYING. Hardware architecture --------------------- IEEE 802.15.4 transceiver chips are available from several manufacturers, including Atmel, Freescale, and Texas Instruments. These chips are similar in size, functionality, and cost. The first prototype is based on the Atmel AT86RF230. The RF module will be physically placed on the left side of the LCD module, replacing part of the display's PCB. When installed in the Ben, the transceiver will connect directly via SPI to the Jz4720. For development, a SiLabs C8051F326 microcontroller implements a USB to SPI conversion.