mirror of
git://projects.qi-hardware.com/ben-wpan.git
synced 2025-03-13 05:59:11 +02:00
e9147b0ba9
- cntr/cntr.pro: added usb_a_plug.lib, mmcx-f-edge.mod, usb_a_plug_smt.mod, and sot-323.mod - cntr/cntr.sch, cntr/cntr.brd: reassigned LED and pull GPIO for easier routing - cntr/cntr.sch, cntr/cntr.brd: replaced mini-USB receptacle with USB A plug and removed 0 Ohm resistor previously used for swapping D+/D- - cntr/cntr.sch, cntr/cntr.brd: changed TVSs on USB from 200 pF 0603 to 100 pF 0402 type - cntr/cntr.sch, cntr/cntr.brd: replaced basically unterminated 100 mil header with properly terminated MMCX connector - cntr/cntr.brd: reduced board width (nominally 15.8 mm) to USB connector width (16 mm) - modules/mmcx-f-edge.fpd: swap contacts for compatibility with "BNC" symbol
IEEE 802.15.4 Low-Rate Wireless Personal Area Network (WPAN) ============================================================ IEEE 802.15.4 defines physical layers and a media access control for wireless networks. ZigBee and 6loWPAN are based on IEEE 802.15.4. This project aims to add experimental WPAN functionality to the Ben NanoNote, in order to permit evaluation of overall network performance and to examine possible integration into future devices. This work is licensed under the terms detailed in the file COPYING. Hardware architecture --------------------- IEEE 802.15.4 transceiver chips are available from several manufacturers, including Atmel, Freescale, and Texas Instruments. These chips are similar in size, functionality, and cost. The first prototype is based on the Atmel AT86RF230. The RF module will be physically placed on the left side of the LCD module, replacing part of the display's PCB. When installed in the Ben, the transceiver will connect directly via SPI to the Jz4720. For development, a SiLabs C8051F326 microcontroller implements a USB to SPI conversion.