eda-tools/kicad-patches/origin-opt.patch

Introduce option -o/--origin to use the auxiliary origin for Gerber, DXF,
and the drill file. The auxiliary origin is always used for positioning
files.

Index: kicad.bzr/pcbnew/pcbnew_scripted.cpp
===================================================================
--- kicad.bzr.orig/pcbnew/pcbnew_scripted.cpp	2011-03-14 11:33:42.000000000 -0300
+++ kicad.bzr/pcbnew/pcbnew_scripted.cpp	2011-03-14 11:35:05.000000000 -0300
@@ -56,6 +56,8 @@
           wxCMD_LINE_VAL_STRING },
      { wxCMD_LINE_SWITCH, wxT("mirror"), wxT("mirror"), wxT("mirror plot (HPGL and Postscript only)") },
      { wxCMD_LINE_SWITCH, wxT("e"), wxT("exclude-pcb-edge"), wxT("exclude PCB edge (Gerber only)") },
+     { wxCMD_LINE_OPTION, wxT("o"), wxT("origin"), wxT("origin for Gerber, DXF, and drill [abs|aux] (default:abs)"),
+	  wxCMD_LINE_VAL_STRING },
      { wxCMD_LINE_SWITCH, wxT("fill-all-zones"), wxT("fill-all-zones"), wxT("fill zones before plotting") },
      { wxCMD_LINE_SWITCH, wxT("drc"), wxT("drc"), wxT("generates a design rule check report (.rpt)") },
      { wxCMD_LINE_SWITCH, wxT("svg"), wxT("svg"), wxT("plots the board in SVG format") },
@@ -146,6 +148,20 @@
     frame->LoadOnePcbFile( fn.GetFullPath() );
     frame->LoadProjectSettings( fn.GetFullPath() );
 
+    // --origin
+    if ( parser.Found( wxT("origin"), &str ) ) {
+	if (!str.CmpNoCase( wxT("abs") ) )
+	    g_DrillOriginIsAuxAxis = FALSE;
+	else if ( !str.CmpNoCase( wxT("aux") ) )
+	    g_DrillOriginIsAuxAxis = TRUE;
+	else
+	{
+	    wxFprintf( stderr,
+	      wxT("Unexpected plot origin option '%ls'.\n"), str.c_str());
+	    return false;
+	}
+    }
+
     if ( parser.Found( wxT("drill") ) )
     {
         DIALOG_GENDRILL* drill_frame = new DIALOG_GENDRILL( frame );
@@ -361,7 +377,7 @@
 
             case PLOT_FORMAT_GERBER:
                 success = frame->Genere_GERBER( fn.GetFullPath(), layer_i,
-                                                false /* PlotOriginIsAuxAxis */,
+						g_DrillOriginIsAuxAxis,
                                                 FILLED /* trace_mode */ );
                 break;
 
@@ -372,7 +388,7 @@
 
             case PLOT_FORMAT_DXF:
                 success = frame->Genere_DXF( fn.GetFullPath(), layer_i,
-                                             false /* PlotOriginIsAuxAxis */,
+					     g_DrillOriginIsAuxAxis,
                                              FILLED /* trace_mode */ );
                 break;
             }
Index: kicad.bzr/pcbnew/gendrill.cpp
===================================================================
--- kicad.bzr.orig/pcbnew/gendrill.cpp	2011-03-14 11:26:15.000000000 -0300
+++ kicad.bzr/pcbnew/gendrill.cpp	2011-03-14 11:34:23.000000000 -0300
@@ -56,7 +56,7 @@
 static int                     s_Zeros_Format = DECIMAL_FORMAT;
 static DrillPrecision          s_Precision( 2, 4 );
 
-static bool                    DrillOriginIsAuxAxis; /* Axis selection (main /
+bool                           g_DrillOriginIsAuxAxis;/* Axis selection (main /
                                                       * auxiliary) for drill
                                                       * origin coordinates */
 static wxPoint                 File_Drill_Offset;    /* Offset coordinate for
@@ -85,7 +85,7 @@
 
     if( s_Zeros_Format == DECIMAL_FORMAT )
         m_Choice_Precision->Enable( false );
-    if( DrillOriginIsAuxAxis )
+    if( g_DrillOriginIsAuxAxis )
         m_Choice_Drill_Offset->SetSelection( 1 );
 
     msg << s_Precision.m_lhs << wxT( ":" ) << s_Precision.m_rhs;
@@ -170,7 +170,7 @@
     Minimal = m_Check_Minimal->IsChecked();
     Mirror  = m_Check_Mirror->IsChecked();
     s_Zeros_Format = m_Choice_Zeros_Format->GetSelection();
-    DrillOriginIsAuxAxis = m_Choice_Drill_Offset->GetSelection();
+    g_DrillOriginIsAuxAxis = m_Choice_Drill_Offset->GetSelection();
 
     msg = m_PenSpeed->GetValue();
     if( msg.ToLong( &ltmp ) )
@@ -217,7 +217,7 @@
         Config->Read( MirrorKey, &Mirror );
         Config->Read( MinimalKey, &Minimal );
         Config->Read( UnitDrillInchKey, &s_Unit_Drill_is_Inch );
-        Config->Read( DrillOriginIsAuxAxisKey, &DrillOriginIsAuxAxis );
+        Config->Read( DrillOriginIsAuxAxisKey, &g_DrillOriginIsAuxAxis );
     }
 
     DIALOG_GENDRILL* frame = new DIALOG_GENDRILL( this );
@@ -241,7 +241,7 @@
         Config->Write( MirrorKey, Mirror );
         Config->Write( MinimalKey, Minimal );
         Config->Write( UnitDrillInchKey, s_Unit_Drill_is_Inch );
-        Config->Write( DrillOriginIsAuxAxisKey, DrillOriginIsAuxAxis );
+        Config->Write( DrillOriginIsAuxAxisKey, g_DrillOriginIsAuxAxis );
     }
 }
 
Index: kicad.bzr/pcbnew/gendrill.h
===================================================================
--- kicad.bzr.orig/pcbnew/gendrill.h	2011-03-14 11:26:15.000000000 -0300
+++ kicad.bzr/pcbnew/gendrill.h	2011-03-14 11:34:23.000000000 -0300
@@ -5,6 +5,10 @@
 #ifndef GENDRILL_H
 #define GENDRILL_H
 
+
+extern bool g_DrillOriginIsAuxAxis; /* Axis selection */
+
+
 /* the DRILL_TOOL class  handles tools used in the excellon drill file */
 class DRILL_TOOL
 {