6 Commits

Author	SHA1	Message	Date
Werner Almesberger	9777d88d5a	Customize the FT232 EEPROM with the Qi Hardware ID and other parameters. ... - hw/c2usb.conf: custom FT232 EEPROM configuration - hw/Makefile (flash-eeprom): new target to customize the FT232 EEPROM	2010-10-08 02:51:27 -03:00
Werner Almesberger	c9f4c9b3db	hw/cam/: toolpath generation for cutting the PCB.	2010-10-08 02:05:51 -03:00
Werner Almesberger	807616f24b	R1/R2 were very close to U1 - move them away. Some small cleanup. ... - hw/c2usb.brd: make board 20 mil wider and moved R1/R2 by this distance away from U1 - hw/c2usb.sch (FB1): added value (33R) to bead - hw/c2usb.sch (R1): put component reference on the left side - hw/c2usb.sch, hw/c2usb.brd: increased version number to 1	2010-10-08 02:00:22 -03:00
Werner Almesberger	c7a53e8736	Make the board a bit bigger for more relaxed spacing of traces and components. ... - hw/c2usb.brd: made board 40 mil wider (we still have a lot of room before reaching the maximum width of a USB dongle) - hw/c2usb.brd: moved R1 and R2 10 mil away from U1 - hw/c2usb.brd: moved the power circuit 10 mil to the left, to increase the clearance of FB1	2010-10-03 20:52:16 -03:00
Werner Almesberger	ad0015d64e	Increased clearance from 9 mil to 9.7 mil. ... - hw/c2usb.brd: increased clearance from 9 mil to 9.7 mil - hw/c2usb.brd: rerouted traces to board edge connector for better clearance	2010-10-03 08:13:34 -03:00
Werner Almesberger	88f3dcc8ab	Firmware-free C2 programmer, with USB interface.	2010-10-03 03:06:30 -03:00