Werner Almesberger
20b7c5f395
modules/qfp-gen.fpd: further improvements (WIP)
...
- add rounding,
- add pad numbers, and
- more measurements.
Alas, the geometry still doesn't look quite right: in the 32 pin
package, the pads seem short and too wide. In the 48 pin version,
it's the opposite.
2012-05-29 21:52:30 -03:00
Adam Wang
983ee35126
Merge branch 'master' of projects.qi-hardware.com:kicad-libs
2012-05-29 18:50:08 +08:00
Adam Wang
9762038bbc
to.fpd: added TO-252 package
2012-05-29 18:48:52 +08:00
Werner Almesberger
b977bc9c20
Merge branch 'master' of projects.qi-hardware.com:kicad-libs
2012-05-29 01:33:31 -03:00
Werner Almesberger
6a242723fb
modules/qfp-gen.fpd: QFP modules generated from IPC-7351 formulas (WIP)
...
Known issues:
- the dimensions don't look quite right yet. Especially clearance
between pads is insufficient.
- results need rounding
- the design is a bit too efficient for its own good: several
measurements aren't possible. Maybe split sides into different
frames.
2012-05-29 01:29:49 -03:00
Adam Wang
b8f4df391b
added to-252 link
2012-05-29 11:58:42 +08:00
Adam Wang
d0f16e9e1e
tsop.fpd: added 28 and 32 pins option
2012-05-29 11:54:41 +08:00
Adam Wang
dfcaa9dba5
tsop.fpd: added new TSOP module
2012-05-29 10:34:38 +08:00
Adam Wang
b88a133fd6
ir.fpd: added front edge silkscreen
2012-05-29 08:39:07 +08:00
Adam Wang
e92838c765
ir.fpd: added IR receiver footprint
2012-05-28 21:10:42 +08:00
Adam Wang
f077efe8dc
added SOIC footprints: 8, 14 and 16 pins.
2012-05-28 13:53:41 +08:00
Adam Wang
6c2655c5bc
INFO: removed AD QFP info
2012-05-25 18:40:10 +08:00
Adam Wang
d4be1a4c8c
qfp.fpd: get rid of the AD land patter and rename variant to name
2012-05-25 18:35:43 +08:00
Adam Wang
61fecbd904
Merge branch 'master' of projects.qi-hardware.com:kicad-libs
2012-05-25 18:19:55 +08:00
Adam Wang
bd5c1c3515
qfp.fpd: added Maxim C48 and Analog Device ST-48 variant
2012-05-25 18:19:04 +08:00
Werner Almesberger
63773814ff
modules/INFO: updated URLs for "ssop"
2012-05-24 18:52:27 -03:00
Werner Almesberger
53d5b0cace
modules/ssop.fpd: added TSSOP-20 and pad center-to-center measurement
2012-05-24 18:51:37 -03:00
Werner Almesberger
6ee60a4607
modules/qfp.fnp: change pad width X1 from 0.55 to 0.45 mm (reported by Adam Wang)
...
The data sheet says it shall be 0.40-0.50 mm
2012-05-24 10:06:38 -03:00
Adam Wang
c1811e3723
mdip.fpd: 1) set mil unit 2) added measurements 3) set width = 355 mil
2012-05-23 17:28:22 +08:00
Adam Wang
ba2a95bf4b
mdip.fpd: added.
2012-05-23 14:47:24 +08:00
Adam Wang
d18ba26945
INFO: added tag F: mdip
2012-05-23 11:00:06 +08:00
Adam Wang
9c6b38d1ae
dip.fpd, dip4of6.fpd: copied both from /labsw/modules
2012-05-22 11:34:50 +08:00
Werner Almesberger
92a8467971
modules/stdpass.fpd: remove -M variants
2012-05-21 00:41:38 -03:00
Werner Almesberger
5171ee9221
modules/zx62m-b-5p.fpd: Hirose ZX62M-B-5P Micro-USB receptacle (mid-mount)
...
From idbg. Hirose's new part number is ZX62M-B-5P(02); needs review for
changes.
2012-04-01 20:12:02 -03:00
Werner Almesberger
0d0c30215e
modules/stdpass.fpd: added 2010 and 2512 (imperial) footprints (draft)
2011-08-23 11:26:55 -03:00
Werner Almesberger
5e1d03b716
modules/sot.fpd: experimental "generic" SOT footprint
2011-08-16 15:58:26 -03:00
Werner Almesberger
0f1829b279
modules/qfn.fpd (QFN28-MCHP-ML): footprint for Microchip 0.65 mm 28QFN package
2011-08-16 12:29:18 -03:00
Werner Almesberger
d04a714bb4
modules/qfn.fpd: added paste island ratio calculation, with NXP recommendations
...
See also
http://lists.en.qi-hardware.com/pipermail/discussion/2011-March/007639.html
2011-08-16 12:26:15 -03:00
Werner Almesberger
57d2356cb7
Updated modules/INFO and modules/Makefile for ssop.fpd
2011-08-15 21:10:11 -03:00
Werner Almesberger
74980e3db9
Moved ssop.fpd from f32xbase/c2usb to kicad-libs (incoming)
2011-08-14 05:03:48 -03:00
Werner Almesberger
a8d0c40d7f
Moved sot-323.fpd from ben-wpan to kicad-libs (incoming)
2011-08-14 04:49:36 -03:00
Werner Almesberger
dc3baf5c15
Moved usb-a-pcb.fpd from f32xbase/c2usb to kicad-libs (incoming)
2011-08-14 04:02:18 -03:00
Werner Almesberger
39c7ee76cf
Moved mini-usb.fpd and usb_a_plug_smt.fpd from ben-wpan to kicad-libs (incoming)
2011-08-14 03:06:15 -03:00
Werner Almesberger
4265fc1e8a
Moved qfn.fpd and qfp.fpd from ben-wpan to kicad-libs (incoming)
2011-08-14 00:26:32 -03:00
Werner Almesberger
de2174d987
modules/INFO, modules/Makefile, modules/fiducial.fpd, AUTHORS: added fiducial
2011-03-23 12:33:40 -03:00
Werner Almesberger
6691da126b
modules/stdpass.fpd: reduced silk screen width of outline from 5 to 3 mil
2011-03-22 02:35:26 -03:00
Werner Almesberger
cf1240df7f
modules/pads.fpd: added 80 mil / 2 mm circular pad "PAD_80x80"
2011-02-03 13:47:08 -03:00
Werner Almesberger
7c622776e7
stdpass.fpd: set outline clearance (courtyard) to 0.15/0.25 mm of IPC-7351B
2011-01-22 11:43:59 -03:00
Werner Almesberger
e29769046c
stdpass.fpd: enlarged 0402 and 0603 footprint
...
For details, see
http://lists.en.qi-hardware.com/pipermail/discussion/2011-January/006959.html
Note: 0402-M and 0603-M will be deleted later, along with all the other
*-M.
2011-01-22 10:15:06 -03:00
Werner Almesberger
4dfabf5143
pads.fpd: set pad type to "bare", so the we don't get solder paste on it
2011-01-17 22:19:36 -03:00
Werner Almesberger
1a5a92e369
8_10-card.fpd: set pad type to "bare", so the we don't get solder paste on them
2011-01-17 22:14:25 -03:00
Werner Almesberger
20a669cc46
now that all users of usd-card have been changed to 8_10-card, remove it
...
- components/usd-card.lib: removed
- modules/usd-card.fpd: removed
- modules/Makefile (MODULES): removed usd-card
2011-01-17 17:48:40 -03:00
Werner Almesberger
85fb77c48b
introduced 8_10-card.fpd as politically correct alias of usd-card.fpd
...
- AUTHORS, INFO, Makefile: renamed "usd-card" to "8_10-card"
- modules/usd-card.fpd: copied to 8_10-card.fpd
- modules/8_10-card.fpd: changed package name from "uSD-Card" to
"8:10-card"
2011-01-17 12:12:49 -03:00
Werner Almesberger
3d882995c5
usd-card.fpd: added distance of contacts base line from card edge
2011-01-04 17:26:42 -03:00
Werner Almesberger
c4f05929a6
modules/usd-card.fpd: added measurement of total length
2010-12-17 07:54:17 -03:00
Werner Almesberger
6bb7d7bb8e
Added modules/INFO and AUTHORS.
2010-10-24 23:41:51 -03:00
Werner Almesberger
a97325c95d
Moved pads.fpd (from f32xbase/c2usb and ben-wpan) here.
...
- modules/pads.fpd: assorted pads for test points and soldering
- modules/Makfile (MODULES): added "pads"
2010-10-20 13:54:52 -03:00
Werner Almesberger
476841d562
modules/stdpass.fpd: added experimental -M variants for manual soldering that
...
have 0.05 mm longer pads.
The regular footprints for 0402 and 0603 are designed for reflow soldering
and they should work well for that. However, when soldering with a
soldering iron, often a little more space on the short side of the
component would be desirable. This change provides a set of components
that add 0.05 mm to each pad, making the entire footprint (and outline)
0.1 mm longer.
This is exerimental and may change in the future.
2010-09-01 18:45:28 -03:00
Werner Almesberger
7ca5701a18
modules/stdpass.fpd, originally from gta02-core
2010-09-01 04:00:07 -03:00
Werner Almesberger
e6fd40b41f
modules/usd-card.fpd: renamed "depth" to "push" and increased from 1.3 mm to
...
1.4 mm
2010-09-01 01:02:18 -03:00
