Adam Wang
4cc64c9393
eus.fpd: added new EUS for TI PTH04000WAH footprint
2012-05-30 12:06:37 +08:00
Adam Wang
8b151f165e
Merge branch 'master' of projects.qi-hardware.com:kicad-libs
2012-05-30 12:06:12 +08:00
Adam Wang
e3556cabf2
INFO: clean up by order
2012-05-30 12:05:25 +08:00
Werner Almesberger
20b7c5f395
modules/qfp-gen.fpd: further improvements (WIP)
...
- add rounding,
- add pad numbers, and
- more measurements.
Alas, the geometry still doesn't look quite right: in the 32 pin
package, the pads seem short and too wide. In the 48 pin version,
it's the opposite.
2012-05-29 21:52:30 -03:00
Adam Wang
983ee35126
Merge branch 'master' of projects.qi-hardware.com:kicad-libs
2012-05-29 18:50:08 +08:00
Adam Wang
9762038bbc
to.fpd: added TO-252 package
2012-05-29 18:48:52 +08:00
Werner Almesberger
b977bc9c20
Merge branch 'master' of projects.qi-hardware.com:kicad-libs
2012-05-29 01:33:31 -03:00
Werner Almesberger
6a242723fb
modules/qfp-gen.fpd: QFP modules generated from IPC-7351 formulas (WIP)
...
Known issues:
- the dimensions don't look quite right yet. Especially clearance
between pads is insufficient.
- results need rounding
- the design is a bit too efficient for its own good: several
measurements aren't possible. Maybe split sides into different
frames.
2012-05-29 01:29:49 -03:00
Adam Wang
b8f4df391b
added to-252 link
2012-05-29 11:58:42 +08:00
Adam Wang
d0f16e9e1e
tsop.fpd: added 28 and 32 pins option
2012-05-29 11:54:41 +08:00
Adam Wang
dfcaa9dba5
tsop.fpd: added new TSOP module
2012-05-29 10:34:38 +08:00
Adam Wang
b88a133fd6
ir.fpd: added front edge silkscreen
2012-05-29 08:39:07 +08:00
Adam Wang
e92838c765
ir.fpd: added IR receiver footprint
2012-05-28 21:10:42 +08:00
Adam Wang
f077efe8dc
added SOIC footprints: 8, 14 and 16 pins.
2012-05-28 13:53:41 +08:00
Adam Wang
6c2655c5bc
INFO: removed AD QFP info
2012-05-25 18:40:10 +08:00
Adam Wang
d4be1a4c8c
qfp.fpd: get rid of the AD land patter and rename variant to name
2012-05-25 18:35:43 +08:00
Adam Wang
61fecbd904
Merge branch 'master' of projects.qi-hardware.com:kicad-libs
2012-05-25 18:19:55 +08:00
Adam Wang
bd5c1c3515
qfp.fpd: added Maxim C48 and Analog Device ST-48 variant
2012-05-25 18:19:04 +08:00
Werner Almesberger
63773814ff
modules/INFO: updated URLs for "ssop"
2012-05-24 18:52:27 -03:00
Werner Almesberger
53d5b0cace
modules/ssop.fpd: added TSSOP-20 and pad center-to-center measurement
2012-05-24 18:51:37 -03:00
Werner Almesberger
6ee60a4607
modules/qfp.fnp: change pad width X1 from 0.55 to 0.45 mm (reported by Adam Wang)
...
The data sheet says it shall be 0.40-0.50 mm
2012-05-24 10:06:38 -03:00
Adam Wang
c1811e3723
mdip.fpd: 1) set mil unit 2) added measurements 3) set width = 355 mil
2012-05-23 17:28:22 +08:00
Adam Wang
ba2a95bf4b
mdip.fpd: added.
2012-05-23 14:47:24 +08:00
Adam Wang
d18ba26945
INFO: added tag F: mdip
2012-05-23 11:00:06 +08:00
Adam Wang
9c6b38d1ae
dip.fpd, dip4of6.fpd: copied both from /labsw/modules
2012-05-22 11:34:50 +08:00
Werner Almesberger
92a8467971
modules/stdpass.fpd: remove -M variants
2012-05-21 00:41:38 -03:00
Werner Almesberger
5171ee9221
modules/zx62m-b-5p.fpd: Hirose ZX62M-B-5P Micro-USB receptacle (mid-mount)
...
From idbg. Hirose's new part number is ZX62M-B-5P(02); needs review for
changes.
2012-04-01 20:12:02 -03:00
Werner Almesberger
0d0c30215e
modules/stdpass.fpd: added 2010 and 2512 (imperial) footprints (draft)
2011-08-23 11:26:55 -03:00
Werner Almesberger
5e1d03b716
modules/sot.fpd: experimental "generic" SOT footprint
2011-08-16 15:58:26 -03:00
Werner Almesberger
0f1829b279
modules/qfn.fpd (QFN28-MCHP-ML): footprint for Microchip 0.65 mm 28QFN package
2011-08-16 12:29:18 -03:00
Werner Almesberger
d04a714bb4
modules/qfn.fpd: added paste island ratio calculation, with NXP recommendations
...
See also
http://lists.en.qi-hardware.com/pipermail/discussion/2011-March/007639.html
2011-08-16 12:26:15 -03:00
Werner Almesberger
57d2356cb7
Updated modules/INFO and modules/Makefile for ssop.fpd
2011-08-15 21:10:11 -03:00
Werner Almesberger
74980e3db9
Moved ssop.fpd from f32xbase/c2usb to kicad-libs (incoming)
2011-08-14 05:03:48 -03:00
Werner Almesberger
a8d0c40d7f
Moved sot-323.fpd from ben-wpan to kicad-libs (incoming)
2011-08-14 04:49:36 -03:00
Werner Almesberger
dc3baf5c15
Moved usb-a-pcb.fpd from f32xbase/c2usb to kicad-libs (incoming)
2011-08-14 04:02:18 -03:00
Werner Almesberger
39c7ee76cf
Moved mini-usb.fpd and usb_a_plug_smt.fpd from ben-wpan to kicad-libs (incoming)
2011-08-14 03:06:15 -03:00
Werner Almesberger
4265fc1e8a
Moved qfn.fpd and qfp.fpd from ben-wpan to kicad-libs (incoming)
2011-08-14 00:26:32 -03:00
Werner Almesberger
de2174d987
modules/INFO, modules/Makefile, modules/fiducial.fpd, AUTHORS: added fiducial
2011-03-23 12:33:40 -03:00
Werner Almesberger
6691da126b
modules/stdpass.fpd: reduced silk screen width of outline from 5 to 3 mil
2011-03-22 02:35:26 -03:00
Werner Almesberger
cf1240df7f
modules/pads.fpd: added 80 mil / 2 mm circular pad "PAD_80x80"
2011-02-03 13:47:08 -03:00
Werner Almesberger
7c622776e7
stdpass.fpd: set outline clearance (courtyard) to 0.15/0.25 mm of IPC-7351B
2011-01-22 11:43:59 -03:00
Werner Almesberger
e29769046c
stdpass.fpd: enlarged 0402 and 0603 footprint
...
For details, see
http://lists.en.qi-hardware.com/pipermail/discussion/2011-January/006959.html
Note: 0402-M and 0603-M will be deleted later, along with all the other
*-M.
2011-01-22 10:15:06 -03:00
Werner Almesberger
4dfabf5143
pads.fpd: set pad type to "bare", so the we don't get solder paste on it
2011-01-17 22:19:36 -03:00
Werner Almesberger
1a5a92e369
8_10-card.fpd: set pad type to "bare", so the we don't get solder paste on them
2011-01-17 22:14:25 -03:00
Werner Almesberger
20a669cc46
now that all users of usd-card have been changed to 8_10-card, remove it
...
- components/usd-card.lib: removed
- modules/usd-card.fpd: removed
- modules/Makefile (MODULES): removed usd-card
2011-01-17 17:48:40 -03:00
Werner Almesberger
85fb77c48b
introduced 8_10-card.fpd as politically correct alias of usd-card.fpd
...
- AUTHORS, INFO, Makefile: renamed "usd-card" to "8_10-card"
- modules/usd-card.fpd: copied to 8_10-card.fpd
- modules/8_10-card.fpd: changed package name from "uSD-Card" to
"8:10-card"
2011-01-17 12:12:49 -03:00
Werner Almesberger
3d882995c5
usd-card.fpd: added distance of contacts base line from card edge
2011-01-04 17:26:42 -03:00
Werner Almesberger
c4f05929a6
modules/usd-card.fpd: added measurement of total length
2010-12-17 07:54:17 -03:00
Werner Almesberger
6bb7d7bb8e
Added modules/INFO and AUTHORS.
2010-10-24 23:41:51 -03:00
Werner Almesberger
a97325c95d
Moved pads.fpd (from f32xbase/c2usb and ben-wpan) here.
...
- modules/pads.fpd: assorted pads for test points and soldering
- modules/Makfile (MODULES): added "pads"
2010-10-20 13:54:52 -03:00
