97e92c854c
modules/components/lga.fpd: add clockwise pin assignment, for BME280 et al.
2016-09-13 02:10:54 -03:00
949eb44ec4
modules/lga.fpd (LGA-8-2.5x2.5-BME250): first draft (still needs cw)
2016-09-13 01:59:56 -03:00
aa9ae563c8
modules/HIERARCHY: add *-RELAXED antennas also to hierarchy
2016-09-01 02:17:55 -03:00
59262dbbfa
modules/meander-2450MHz.fpd (-RELAXED): grow bottom end of the antenna by 0.1 mm
...
... for a more relaxed fit of the ground via.
Background: if using a 0.3 mm drill for a finished hole size of 0.2 mm,
the drill to pad edge clearance is only 0.1 mm on the top and bottom of
the pad. To relax the constraints on the manufacturing process, we grow
the pad a little, to add an extra 2 * 0.05 mm of clearance.
2016-09-01 00:52:31 -03:00
143fa7fe10
modules/sod.fpd (SOD-523): grow diode symbol a little (from 0.5 to 0.6 x width)
2016-04-06 10:41:01 -03:00
cd5735643f
modules/sod.fpd (SOD-523): add 1.2 x 0.8 diode package
...
Pads are compromise between
- ON Semiconductor BAS16XV2 (very tight),
- Panasonic DA2S10400L (pads a bit wide), and
- Fairchild 1N4148WT (quite long)
2016-04-06 10:27:27 -03:00
74671ccba2
modules/vson-powerpad.fpd: thermally enhanced 10-DFN, for TI TPS6102x
2016-03-30 04:48:03 -03:00
34a20f9778
modules/memcard8-hirose-dm3cs.fpd: Hirose DM3CS memory card holder
2016-03-07 20:52:08 -03:00
55907028d3
modules/DESCR (8:10-SOCKET-RA-PUSH-PULL): this is Amphenol 114-00841-68
2016-03-07 19:15:42 -03:00
23838b3370
modules/memcard8-jae-st1w008s4b.fpd: JAE ST1W008S4B memory card holder
2016-03-07 19:15:42 -03:00
c9e1946fca
modules/inductor-2p.fpd (INDUCTOR-2P-6mmx6mm): add 6 x 6 mm inductor
...
Taiyo Yuden NR6028T4R7M or similar.
2016-02-29 22:02:12 -03:00
f347b29640
modules/qfn.fpd, HIERARCHY: add QFN48-nRF51 (0.4 mm pitch !)
2016-02-07 11:00:47 -03:00
d276d71b6b
modules/0805-6.fpd: add 0603-6, remove unused parameters "a" and "c"
2016-02-05 04:57:14 -03:00
b8cf942f7d
modules/dfn.fpd: add DFN-8-0.4mm
2016-01-17 13:02:09 -03:00
74bd241990
modules/DESCR: add description for TL3315 and EVQPQ
2015-09-11 11:25:40 -03:00
5e493d85f2
modules/tact-4-rect-smt.fpd: rectangular SMT tactile switch
...
- TL3315: E-Switch TL3315 series
- EVQPQ: Panasonic EVQPQ series and equivalent C&K PTS 530 series
2015-09-11 11:17:10 -03:00
ab61cf9bec
modules/rev-led.fpd: reverse-mounted LEDs (just 1206 for now)
...
Examples: LTST-C230, APTR3216EC
2015-05-28 04:12:57 -03:00
4247b779e4
modules/df40.fpd: Hirose DF40 series (unshielded, C and HC variants)
2015-05-28 02:33:17 -03:00
a23a6ea1f8
modules/0805-6.fpd: copy over from ben-wpan
2015-05-23 12:39:19 -03:00
e589e56eeb
modules/pogo.fpd, HIERARCHY: add -SILK variants (with silk screen circle)
2015-02-19 05:13:34 -03:00
34bf59dd80
sod.fpd (SOD-123): add SOD-123 (~4.5 x 1.7 mm diode) footprint
...
Guesswork based on the following body and footprint measures:
Dimension Comchip (CGRKM400x) Rohm (RR264M-400) MCC (SM400xPL)
--------- ------------------- ----------------- --------------
B 1.4 - 1.8 1.6 +/- 0.1 1.40 - 1.90
H 2.4 - 2.8 2.6 +/- 0.1 2.55 - 3.10
Cx 3.30 3.05 129 mil = 3.3 mm
Px 1.40 0.85 39 mil = 0.9 mm
Py 1.90 1.2 48 mil = 1.2 mm
C
Gap 1.90 2.20 93 mil = 2.4 mm
End-to-end pad 4.70 3.90 165 mil = 4.2 mm
End-to-end pin 3.30-3.70 3.5 +/- 0.12 3.55 - 3.85
2015-01-05 22:42:46 -03:00
87650f75ba
modules/memcard8-molex-1050270001.fpd: minimalistic memory card holder
2014-12-30 13:12:05 -03:00
365de11aac
modules/1059.fpd: renamed 1059, 1060 to KS-* to avoid confusion with stdpass
2014-06-01 02:26:29 -03:00
e83674a65a
modules/HIERARCHY: added more sub-caregories for Connector/{SMT, TH}
...
For USB, uSD, and batteries
2014-06-01 02:19:23 -03:00
b7d32fa1aa
modules/1059.fpd (1059, 1060): Keystone CR2032 battery holders (TH and SMT)
2014-06-01 02:10:34 -03:00
bd3663707e
modules/stdpass.fpd (xtal2-3.2mmx1.5mm): add crystal footprint
...
Not really a standard footprint, but since it fits the general pattern
so well ...
2014-05-20 14:49:00 -03:00
083e2b0943
modules/sod.fpd: added SOD-323
...
Based on:
http://www.nxp.com/documents/reflow_soldering/sod323_fr.pdf
file:///home/root/Downloads/SOD-323PD.pdf
http://www.diodes.com/datasheets/ZLLS400.pdf
http://www.infineon.com/cms/packages/SMD_-_Surface_Mounted_Devices/SOD/SOD323_xSC76x.html
2014-05-13 10:45:01 -03:00
a89a1d5caf
modules/spacer.fpd: add 7.5 mm clearance (bare screw/nut)
2014-01-31 14:41:06 -03:00
63e8c0d205
modules/HIERARCHY: move FIDUCIAL from "Mechanical" to "Structure"
2014-01-31 14:17:37 -03:00
feb85080b2
modules/HIERARCHY: give switches their own top-level category
2014-01-31 14:17:37 -03:00
384ad5ec08
modules/pogo.fpd: add Mill-Max 09xx series TH pogo pins
2014-01-31 14:17:37 -03:00
d83737d636
modules/usb_a_rcpt_mid.fpd: enlarge 48458 bay by tolerance
2014-01-18 16:09:33 -03:00
76039af549
modules/pads.fpd: add -NOSILK variants; add silk measurements for rectangular pads
2014-01-17 20:20:56 -03:00
5bfda4d341
modules/meander-2450MHz.fpd: 1.6 mm variant from CC-Antenna-DK, board #15
...
Discussion:
http://e2e.ti.com/support/low_power_rf/f/155/p/146031/528211.aspx
Design Note DN031:
http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=swra328&fileType=pdf
Layout:
http://www.ti.com/lit/zip/swrr070
The antenna layout is in the file "CC-Antenna-DK - EtchLayer1Top.gdo"
2014-01-16 12:53:16 -03:00
b0352b4259
modules/usb_a_rcpt_mid.fpd: remove solder paste from through-holes
2014-01-15 21:59:07 -03:00
83fc1ab657
modules/qfn.fpd (QFN32-CC2543): experimental footprint with large center hole (for DIY)
2014-01-15 21:54:05 -03:00
6b825eb872
modules/qfn.fpd (QFN32-Freescale): make pads round to increase clearance
2014-01-14 03:30:09 -03:00
fc2d104008
modules/sw-spdt-smt.fpd: add SW-CUS12B (for Copal CUS-12B and C&K PCM12SMTR)
2014-01-07 21:07:59 -03:00
065199a87e
modules/qfn.fpd (QFN32-Freescale): add footprint for KL25 in 32QFN package
2014-01-05 16:53:49 -03:00
62c90e2bf3
modules/lp2032sm.fpd: MPD Surface Mount Battery Holders for CR2032 (draft)
...
The data sheets don't seem very reliable. Check against real parts.
2014-01-05 16:12:05 -03:00
1b997b80eb
modules/usb_a_rcpt_mid.fpd: correct 48258 drill hole; make pin pads oval
...
By making the pin pads slightly oval (1.85:2) the clearance between pins
2 and 3 is now about 0.296 mm / 11.6 mil.
2014-01-05 15:30:48 -03:00
b19e249644
modules/usb_a_rcpt_mid.fpd: Molex 48258-0002/0001, TE 1746311
2014-01-05 12:09:57 -03:00
bcb5563136
modules/usb_a_rcpt_smt.fpd: USB A receptacle
...
CnC Tech 1002-002-01100, Assmann AU-Y1006-2-R, etc.
2013-10-25 20:45:38 -03:00
e15d2b546b
modules/sw-spdt-smt.fpd: draw complete outline of case
2013-09-30 04:51:48 -03:00
2f412033e4
modules/zx62-b-5pa.fpd: add ZX62R-B-5P (Micro-USB B reversed) footprint
2013-09-25 13:17:57 -03:00
4e10389041
modules/tswa.fpd: add more measurements
2013-09-20 20:30:33 -03:00
1bed1223a0
modules/er-oled-fpc30.fpd: make pads 0.06 mm wider, 0.1 mm longer
2013-09-20 15:01:29 -03:00
18ed84d831
add C&K JS102011SAQN SPDT SMT switch (symbol and footprint)
2013-09-16 06:45:21 -03:00
784f0e6221
modules/sot.fpd: add 236 (23-6) footprint
2013-09-15 21:42:04 -03:00
2cf146cce3
modules/stdpass.fpd: add 1008 (for Samsung CIG22L4R7MNE inductor)
2013-09-15 21:22:23 -03:00
Werner Almesberger