Werner Almesberger 59262dbbfa modules/meander-2450MHz.fpd (-RELAXED): grow bottom end of the antenna by 0.1 mm ...

... for a more relaxed fit of the ground via.

Background: if using a 0.3 mm drill for a finished hole size of 0.2 mm,
the drill to pad edge clearance is only 0.1 mm on the top and bottom of
the pad. To relax the constraints on the manufacturing process, we grow
the pad a little, to add an extra 2 * 0.05 mm of clearance.

2016-09-01 00:52:31 -03:00

..

8_10-card.fpd

8_10-card.fpd: set pad type to "bare", so the we don't get solder paste on them

2011-01-17 22:14:25 -03:00

8_10-socket-ra-push-pull.fpd

modules/8_10-socket-ra-push-pull.fpd: Amphenol 114-00841-68 push-pull uSD

2012-12-22 22:01:06 -03:00

8_10-socket-ra.fpd

8_10-socket-ra.fpd: added 8:10-SOCKET-RA

2012-06-14 20:41:07 +08:00

0805-6.fpd

modules/0805-6.fpd: add 0603-6, remove unused parameters "a" and "c"

2016-02-05 04:57:14 -03:00

1059.fpd

modules/1059.fpd: renamed 1059, 1060 to KS-* to avoid confusion with stdpass

2014-06-01 02:26:29 -03:00

bat-clip-aa-th.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

bga.fpd

bga: use the nominal size

2012-12-21 22:32:53 +08:00

c-smd.fpd

c-smd.fpd: added packages for SMD Aluminum Electrolytic Capacitors

2012-06-07 20:26:59 +08:00

c-t-smd.fpd

c-t-smd.fpd: added variants named: TC-$Case-$EIA-$Density for relevant EIA size of Tantalum capacitors

2012-06-08 13:28:55 +08:00

dcjack.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

DESCR

modules/vson-powerpad.fpd: thermally enhanced 10-DFN, for TI TPS6102x

2016-03-30 04:48:03 -03:00

df40.fpd

modules/df40.fpd: Hirose DF40 series (unshielded, C and HC variants)

2015-05-28 02:33:17 -03:00

dfn.fpd

modules/dfn.fpd: add DFN-8-0.4mm

2016-01-17 13:02:09 -03:00

din-5.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

dip4of6.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

dip.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

do-214.fpd

do-214.fpd: added DO-214AA package

2012-06-06 15:57:00 +08:00

dvi-recept-ra.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

e-switch320.fpd

modules/: add E-SWITCH series 320 tact switch

2012-08-22 16:34:32 -03:00

er-oled-fpc30.fpd

modules/er-oled-fpc30.fpd: make pads 0.06 mm wider, 0.1 mm longer

2013-09-20 15:01:29 -03:00

eus.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

evqq7.fpd

add Panasonic EVQQ7 "joystick" switch

2012-11-05 17:47:12 -03:00

fiducial.fpd

modules/INFO, modules/Makefile, modules/fiducial.fpd, AUTHORS: added fiducial

2011-03-23 12:33:40 -03:00

he-2row-dip.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

he-shrouded.fpd

he-shrouded.fpd: added NPTH frame

2012-06-12 19:10:20 +08:00

header.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

HIERARCHY

modules/sod.fpd (SOD-523): add 1.2 x 0.8 diode package

2016-04-06 10:27:27 -03:00

inductor-2p.fpd

modules/inductor-2p.fpd (INDUCTOR-2P-6mmx6mm): add 6 x 6 mm inductor

2016-02-29 22:02:12 -03:00

INFO

modules/inductor-2p.fpd: footprints for 2-SMD inductors (3mmx3mm for now)

2012-12-22 22:22:41 -03:00

ir.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

ledsmd.fpd

ledsmd.fpd: fixed polarized marker

2012-06-18 18:01:17 +08:00

lga.fpd

modules/lga.fpd: LGA-16-3x3 package, for LIS3DH

2012-12-22 18:50:44 -03:00

lp2032sm.fpd

modules/lp2032sm.fpd: MPD Surface Mount Battery Holders for CR2032 (draft)

2014-01-05 16:12:05 -03:00

Makefile

modules/vson-powerpad.fpd: thermally enhanced 10-DFN, for TI TPS6102x

2016-03-30 04:48:03 -03:00

mdip.fpd

mdip.fpd: 1) set mil unit 2) added measurements 3) set width = 355 mil

2012-05-23 17:28:22 +08:00

meander-2450MHz.fpd

modules/meander-2450MHz.fpd (-RELAXED): grow bottom end of the antenna by 0.1 mm

2016-09-01 00:52:31 -03:00

memcard8-amp-10100660.fpd

modules/memcard8-amp-10100660.fpd: Amphenol 10100660 footprint (draft)

2013-09-15 11:26:47 -03:00

memcard8-hirose-dm3cs.fpd

modules/memcard8-hirose-dm3cs.fpd: Hirose DM3CS memory card holder

2016-03-07 20:52:08 -03:00

memcard8-jae-st1w008s4b.fpd

modules/memcard8-jae-st1w008s4b.fpd: JAE ST1W008S4B memory card holder

2016-03-07 19:15:42 -03:00

memcard8-molex-1050270001.fpd

modules/memcard8-molex-1050270001.fpd: minimalistic memory card holder

2014-12-30 13:12:05 -03:00

mic-ra-dip.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

mini-usb.fpd

Moved mini-usb.fpd and usb_a_plug_smt.fpd from ben-wpan to kicad-libs (incoming)

2011-08-14 03:06:15 -03:00

pads-array.fpd

modules/pads-array.fpd: added measurements; enabled more pads types

2012-07-13 23:01:03 -03:00

pads.fpd

modules/pads.fpd: add -NOSILK variants; add silk measurements for rectangular pads

2014-01-17 20:20:56 -03:00

phonejack.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

pogo.fpd

modules/pogo.fpd, HIERARCHY: add -SILK variants (with silk screen circle)

2015-02-19 05:13:34 -03:00

qfn.fpd

modules/qfn.fpd, HIERARCHY: add QFN48-nRF51 (0.4 mm pitch !)

2016-02-07 11:00:47 -03:00

qfp-gen.fpd

modules/qfp-gen.fpd: further improvements (WIP)

2012-05-29 21:52:30 -03:00

qfp.fpd

qfp.fpd: added QFP64 variant

2012-06-04 16:46:19 +08:00

rca-3-ra.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

rev-led.fpd

modules/rev-led.fpd: reverse-mounted LEDs (just 1206 for now)

2015-05-28 04:12:57 -03:00

rj45.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

sod.fpd

modules/sod.fpd (SOD-523): grow diode symbol a little (from 0.5 to 0.6 x width)

2016-04-06 10:41:01 -03:00

soic.fpd

added SOIC footprints: 8, 14 and 16 pins.

2012-05-28 13:53:41 +08:00

sot23.fpd

sot23.fpd: added measurement for max. distance between pads.

2012-06-06 11:05:40 +08:00

sot-323.fpd

Moved sot-323.fpd from ben-wpan to kicad-libs (incoming)

2011-08-14 04:49:36 -03:00

sot.fpd

modules/sot.fpd: add 236 (23-6) footprint

2013-09-15 21:42:04 -03:00

spacer.fpd

modules/spacer.fpd: add 7.5 mm clearance (bare screw/nut)

2014-01-31 14:41:06 -03:00

ssop.fpd

modules/ssop.fpd: add TSSOP-16

2012-11-02 23:34:45 -03:00

stdpass.fpd

modules/stdpass.fpd (xtal2-3.2mmx1.5mm): add crystal footprint

2014-05-20 14:49:00 -03:00

sw-spdt-smt.fpd

modules/sw-spdt-smt.fpd: add SW-CUS12B (for Copal CUS-12B and C&K PCM12SMTR)

2014-01-07 21:07:59 -03:00

tactile-sw-spst-ra-dip.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

template.pro

modules/: "make brd" opens pcbnew for footprint examination

2012-12-20 22:42:55 -03:00

to.fpd

modules/to.fpd (TO-252): remove zero-width pad 2

2012-07-12 04:36:51 -03:00

tsop.fpd

tsop.fpd: changed measurements and moved marker to be close to pin1's left side.

2012-06-05 22:19:26 +08:00

tssop5.fpd

modules/tssop5.fpd: remove zero-width pad 5

2012-07-12 04:38:38 -03:00

tswa.fpd

modules/tswa.fpd: add more measurements

2013-09-20 20:30:33 -03:00

usb_a_plug_smt.fpd

modules/usb_a_plug_smt.fpd: mixed TH/SMT; change the two TH pads to "bare"

2012-07-19 00:04:29 -03:00

usb_a_rcpt_mid.fpd

modules/usb_a_rcpt_mid.fpd: enlarge 48458 bay by tolerance

2014-01-18 16:09:33 -03:00

usb_a_rcpt_smt.fpd

modules/usb_a_rcpt_smt.fpd: USB A receptacle

2013-10-25 20:45:38 -03:00

usb-a-dual-recept-r.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

usb-a-pcb.fpd

modules/usb-a-pcb.fpd: change pad type from "normal" to "bare"

2012-07-18 23:41:26 -03:00

vson-powerpad.fpd

modules/vson-powerpad.fpd: thermally enhanced 10-DFN, for TI TPS6102x

2016-03-30 04:48:03 -03:00

xlr-plug.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

xlr-socket.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

xtal-2.fpd

xtal-2.fpd: added 2-pins smd xtal pattern -> xtal2-11.5mmx4.83mm

2012-06-07 13:42:15 +08:00

xtal-4.fpd

xtal-4.fpd: added xtal4-5mmx3.2mm variant package

2012-06-07 14:37:28 +08:00

zx62-b-5pa.fpd

modules/zx62-b-5pa.fpd: add ZX62R-B-5P (Micro-USB B reversed) footprint

2013-09-25 13:17:57 -03:00

zx62m-b-5p.fpd

modules/zx62m-b-5p.fpd: add Y size of rear pads

2012-08-03 20:24:32 -03:00