| .. |
|
8_10-card.fpd
|
8_10-card.fpd: set pad type to "bare", so the we don't get solder paste on them
|
2011-01-17 22:14:25 -03:00 |
|
8_10-socket-ra-push-pull.fpd
|
modules/8_10-socket-ra-push-pull.fpd: Amphenol 114-00841-68 push-pull uSD
|
2012-12-22 22:01:06 -03:00 |
|
8_10-socket-ra.fpd
|
8_10-socket-ra.fpd: added 8:10-SOCKET-RA
|
2012-06-14 20:41:07 +08:00 |
|
0805-6.fpd
|
modules/0805-6.fpd: add 0603-6, remove unused parameters "a" and "c"
|
2016-02-05 04:57:14 -03:00 |
|
1059.fpd
|
modules/1059.fpd: renamed 1059, 1060 to KS-* to avoid confusion with stdpass
|
2014-06-01 02:26:29 -03:00 |
|
DESCR
|
modules/stqfn20.fpd (STQFN-20: for Silego SLG46531
|
2016-09-13 04:16:12 -03:00 |
|
HIERARCHY
|
modules/header-50mil-pin.fpd: add 50 mil headers suitable for regular pins
|
2017-05-11 13:58:22 -03:00 |
|
INFO
|
modules/inductor-2p.fpd: footprints for 2-SMD inductors (3mmx3mm for now)
|
2012-12-22 22:22:41 -03:00 |
|
Makefile
|
modules/header-50mil-pin.fpd: add 50 mil headers suitable for regular pins
|
2017-05-11 13:58:22 -03:00 |
|
bat-clip-aa-th.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
bga.fpd
|
bga: use the nominal size
|
2012-12-21 22:32:53 +08:00 |
|
c-smd.fpd
|
c-smd.fpd: added packages for SMD Aluminum Electrolytic Capacitors
|
2012-06-07 20:26:59 +08:00 |
|
c-t-smd.fpd
|
c-t-smd.fpd: added variants named: TC-$Case-$EIA-$Density for relevant EIA size of Tantalum capacitors
|
2012-06-08 13:28:55 +08:00 |
|
dcjack.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
df40.fpd
|
modules/df40.fpd: Hirose DF40 series (unshielded, C and HC variants)
|
2015-05-28 02:33:17 -03:00 |
|
dfn.fpd
|
modules/dfn.fpd: replace fixed '8' by 'pins' variable, so 6-pin versions of the footprints are numbered work too
|
2017-02-06 11:33:26 -03:00 |
|
din-5.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
dip.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
dip4of6.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
do-214.fpd
|
do-214.fpd: added DO-214AA package
|
2012-06-06 15:57:00 +08:00 |
|
dvi-recept-ra.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
e-switch320.fpd
|
modules/: add E-SWITCH series 320 tact switch
|
2012-08-22 16:34:32 -03:00 |
|
er-oled-fpc30.fpd
|
modules/er-oled-fpc30.fpd: make pads 0.06 mm wider, 0.1 mm longer
|
2013-09-20 15:01:29 -03:00 |
|
eus.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
evqq7.fpd
|
add Panasonic EVQQ7 "joystick" switch
|
2012-11-05 17:47:12 -03:00 |
|
fiducial.fpd
|
modules/INFO, modules/Makefile, modules/fiducial.fpd, AUTHORS: added fiducial
|
2011-03-23 12:33:40 -03:00 |
|
he-2row-dip.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
he-shrouded.fpd
|
he-shrouded.fpd: added NPTH frame
|
2012-06-12 19:10:20 +08:00 |
|
header-50mil-pin.fpd
|
modules/header-50mil-pin.fpd: add 50 mil headers suitable for regular pins
|
2017-05-11 13:58:22 -03:00 |
|
header.fpd
|
modules/header.fpd, HIERARCHY: increased header columns from 1-20 to 1-40
|
2016-12-31 09:18:19 -03:00 |
|
inductor-2p.fpd
|
modules/inductor-2p.fpd (INDUCTOR-2P-6mmx6mm): add 6 x 6 mm inductor
|
2016-02-29 22:02:12 -03:00 |
|
ir.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
jtrace.fpd
|
modules/jtrace.fpd: "jumper trace" (short cuttable trace, compatible with R)
|
2016-11-20 18:20:00 -03:00 |
|
ledsmd.fpd
|
ledsmd.fpd: fixed polarized marker
|
2012-06-18 18:01:17 +08:00 |
|
lga.fpd
|
modules/lga.fpd, HIERARCHY (LGA-12-1.7x2-RUT): TI "RUT" package
|
2016-12-31 06:58:13 -03:00 |
|
lp2032sm.fpd
|
modules/lp2032sm.fpd: MPD Surface Mount Battery Holders for CR2032 (draft)
|
2014-01-05 16:12:05 -03:00 |
|
mdip.fpd
|
mdip.fpd: 1) set mil unit 2) added measurements 3) set width = 355 mil
|
2012-05-23 17:28:22 +08:00 |
|
meander-2450MHz.fpd
|
modules/meander-2450MHz.fpd (-RELAXED): grow bottom end of the antenna by 0.1 mm
|
2016-09-01 00:52:31 -03:00 |
|
memcard8-amp-10100660.fpd
|
modules/memcard8-amp-10100660.fpd: Amphenol 10100660 footprint (draft)
|
2013-09-15 11:26:47 -03:00 |
|
memcard8-hirose-dm3cs.fpd
|
modules/memcard8-hirose-dm3cs.fpd: Hirose DM3CS memory card holder
|
2016-03-07 20:52:08 -03:00 |
|
memcard8-jae-st1w008s4b.fpd
|
modules/memcard8-jae-st1w008s4b.fpd: JAE ST1W008S4B memory card holder
|
2016-03-07 19:15:42 -03:00 |
|
memcard8-molex-47309.fpd
|
modules/memcard8-molex-47309.fpd: Molex 47309 series memory card headers
|
2017-02-25 16:46:20 -03:00 |
|
memcard8-molex-1050270001.fpd
|
modules/memcard8-molex-1050270001.fpd: minimalistic memory card holder
|
2014-12-30 13:12:05 -03:00 |
|
mic-ra-dip.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
mini-usb.fpd
|
Moved mini-usb.fpd and usb_a_plug_smt.fpd from ben-wpan to kicad-libs (incoming)
|
2011-08-14 03:06:15 -03:00 |
|
msl0104.fpd
|
modules/msl0104.fpd: Rohm MSL0104 RGB LED
|
2016-09-14 13:16:07 -03:00 |
|
pads-array.fpd
|
modules/pads-array.fpd: added measurements; enabled more pads types
|
2012-07-13 23:01:03 -03:00 |
|
pads.fpd
|
modules/pads.fpd: add -NOSILK variants; add silk measurements for rectangular pads
|
2014-01-17 20:20:56 -03:00 |
|
phonejack.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
pogo.fpd
|
modules/pogo.fpd, HIERARCHY: add -SILK variants (with silk screen circle)
|
2015-02-19 05:13:34 -03:00 |
|
qfn.fpd
|
modules/qfn.fpd, HIERARCHY (QFN24-VGGD-8): "MO-220 variation VGGD-8", for XRA1201
|
2016-12-30 15:44:25 -03:00 |
|
qfp-gen.fpd
|
modules/qfp-gen.fpd: further improvements (WIP)
|
2012-05-29 21:52:30 -03:00 |
|
qfp.fpd
|
qfp.fpd: added QFP64 variant
|
2012-06-04 16:46:19 +08:00 |
|
rca-3-ra.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
rev-led.fpd
|
modules/rev-led.fpd: reverse-mounted LEDs (just 1206 for now)
|
2015-05-28 04:12:57 -03:00 |
|
rj45.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
sod.fpd
|
modules/sod.fpd (SOD-523): grow diode symbol a little (from 0.5 to 0.6 x width)
|
2016-04-06 10:41:01 -03:00 |
|
soic.fpd
|
added SOIC footprints: 8, 14 and 16 pins.
|
2012-05-28 13:53:41 +08:00 |
|
sot-323.fpd
|
Moved sot-323.fpd from ben-wpan to kicad-libs (incoming)
|
2011-08-14 04:49:36 -03:00 |
|
sot.fpd
|
modules/sot.fpd: add 236 (23-6) footprint
|
2013-09-15 21:42:04 -03:00 |
|
sot23.fpd
|
sot23.fpd: added measurement for max. distance between pads.
|
2012-06-06 11:05:40 +08:00 |
|
spacer.fpd
|
modules/spacer.fpd: add 7.5 mm clearance (bare screw/nut)
|
2014-01-31 14:41:06 -03:00 |
|
ssop.fpd
|
modules/ssop.fpd: add TSSOP-16
|
2012-11-02 23:34:45 -03:00 |
|
stdpass.fpd
|
modules/stdpass.fpd (xtal2-3.2mmx1.5mm): add crystal footprint
|
2014-05-20 14:49:00 -03:00 |
|
stqfn20.fpd
|
modules/stqfn20.fpd: forgot to commit
|
2016-09-14 13:16:50 -03:00 |
|
sw-spdt-smt.fpd
|
modules/sw-spdt-smt.fpd: add SW-CUS12B (for Copal CUS-12B and C&K PCM12SMTR)
|
2014-01-07 21:07:59 -03:00 |
|
tact-4-rect-smt.fpd
|
modules/tact-4-rect-smt.fpd: forgot to commit (reported by Alvaro Gamez Machado)
|
2016-12-10 14:52:55 -03:00 |
|
tactile-sw-spst-ra-dip.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
template.pro
|
modules/: "make brd" opens pcbnew for footprint examination
|
2012-12-20 22:42:55 -03:00 |
|
to.fpd
|
modules/to.fpd (TO-252): remove zero-width pad 2
|
2012-07-12 04:36:51 -03:00 |
|
tsop.fpd
|
tsop.fpd: changed measurements and moved marker to be close to pin1's left side.
|
2012-06-05 22:19:26 +08:00 |
|
tssop5.fpd
|
modules/tssop5.fpd: remove zero-width pad 5
|
2012-07-12 04:38:38 -03:00 |
|
tswa.fpd
|
modules/tswa.fpd: add more measurements
|
2013-09-20 20:30:33 -03:00 |
|
usb-a-dual-recept-r.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
usb-a-pcb.fpd
|
modules/usb-a-pcb.fpd: change pad type from "normal" to "bare"
|
2012-07-18 23:41:26 -03:00 |
|
usb_a_plug_smt.fpd
|
modules/usb_a_plug_smt.fpd: mixed TH/SMT; change the two TH pads to "bare"
|
2012-07-19 00:04:29 -03:00 |
|
usb_a_rcpt_mid.fpd
|
modules/usb_a_rcpt_mid.fpd: enlarge 48458 bay by tolerance
|
2014-01-18 16:09:33 -03:00 |
|
usb_a_rcpt_smt.fpd
|
modules/usb_a_rcpt_smt.fpd: USB A receptacle
|
2013-10-25 20:45:38 -03:00 |
|
vson-powerpad.fpd
|
modules/vson-powerpad.fpd: thermally enhanced 10-DFN, for TI TPS6102x
|
2016-03-30 04:48:03 -03:00 |
|
xlr-plug.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
xlr-socket.fpd
|
modules/: make pads of all fully through-hole components "bare"
|
2012-07-19 00:02:05 -03:00 |
|
xtal-2.fpd
|
xtal-2.fpd: added 2-pins smd xtal pattern -> xtal2-11.5mmx4.83mm
|
2012-06-07 13:42:15 +08:00 |
|
xtal-4.fpd
|
xtal-4.fpd: added xtal4-5mmx3.2mm variant package
|
2012-06-07 14:37:28 +08:00 |
|
zx62-b-5pa.fpd
|
modules/zx62-b-5pa.fpd: add ZX62R-B-5P (Micro-USB B reversed) footprint
|
2013-09-25 13:17:57 -03:00 |
|
zx62m-b-5p.fpd
|
modules/zx62m-b-5p.fpd: add Y size of rear pads
|
2012-08-03 20:24:32 -03:00 |
e9464fddac