kicad-libs

8_10-card.fpd

8_10-card.fpd: set pad type to "bare", so the we don't get solder paste on them

2011-01-17 22:14:25 -03:00

8_10-socket-ra-push-pull.fpd

modules/8_10-socket-ra-push-pull.fpd: Amphenol 114-00841-68 push-pull uSD

2012-12-22 22:01:06 -03:00

8_10-socket-ra.fpd

8_10-socket-ra.fpd: added 8:10-SOCKET-RA

2012-06-14 20:41:07 +08:00

0805-6.fpd

modules/0805-6.fpd: add 0603-6, remove unused parameters "a" and "c"

2016-02-05 04:57:14 -03:00

1059.fpd

modules/1059.fpd: renamed 1059, 1060 to KS-* to avoid confusion with stdpass

2014-06-01 02:26:29 -03:00

bat-clip-aa-th.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

bga.fpd

bga: use the nominal size

2012-12-21 22:32:53 +08:00

c-smd.fpd

c-smd.fpd: added packages for SMD Aluminum Electrolytic Capacitors

2012-06-07 20:26:59 +08:00

c-t-smd.fpd

c-t-smd.fpd: added variants named: TC-$Case-$EIA-$Density for relevant EIA size of Tantalum capacitors

2012-06-08 13:28:55 +08:00

dcjack.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

DESCR

modules/stqfn20.fpd (STQFN-20: for Silego SLG46531

2016-09-13 04:16:12 -03:00

df40.fpd

modules/df40.fpd: Hirose DF40 series (unshielded, C and HC variants)

2015-05-28 02:33:17 -03:00

dfn.fpd

modules/dfn.fpd: replace fixed '8' by 'pins' variable, so 6-pin versions of the footprints are numbered work too

2017-02-06 11:33:26 -03:00

din-5.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

dip4of6.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

dip.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

do-214.fpd

do-214.fpd: added DO-214AA package

2012-06-06 15:57:00 +08:00

dvi-recept-ra.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

e-switch320.fpd

modules/: add E-SWITCH series 320 tact switch

2012-08-22 16:34:32 -03:00

er-oled-fpc30.fpd

modules/er-oled-fpc30.fpd: make pads 0.06 mm wider, 0.1 mm longer

2013-09-20 15:01:29 -03:00

eus.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

evqq7.fpd

add Panasonic EVQQ7 "joystick" switch

2012-11-05 17:47:12 -03:00

fiducial.fpd

modules/INFO, modules/Makefile, modules/fiducial.fpd, AUTHORS: added fiducial

2011-03-23 12:33:40 -03:00

he-2row-dip.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

he-shrouded.fpd

he-shrouded.fpd: added NPTH frame

2012-06-12 19:10:20 +08:00

header.fpd

modules/header.fpd, HIERARCHY: increased header columns from 1-20 to 1-40

2016-12-31 09:18:19 -03:00

HIERARCHY

modules/header.fpd, HIERARCHY: increased header columns from 1-20 to 1-40

2016-12-31 09:18:19 -03:00

inductor-2p.fpd

modules/inductor-2p.fpd (INDUCTOR-2P-6mmx6mm): add 6 x 6 mm inductor

2016-02-29 22:02:12 -03:00

INFO

modules/inductor-2p.fpd: footprints for 2-SMD inductors (3mmx3mm for now)

2012-12-22 22:22:41 -03:00

ir.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

jtrace.fpd

modules/jtrace.fpd: "jumper trace" (short cuttable trace, compatible with R)

2016-11-20 18:20:00 -03:00

ledsmd.fpd

ledsmd.fpd: fixed polarized marker

2012-06-18 18:01:17 +08:00

lga.fpd

modules/lga.fpd, HIERARCHY (LGA-12-1.7x2-RUT): TI "RUT" package

2016-12-31 06:58:13 -03:00

lp2032sm.fpd

modules/lp2032sm.fpd: MPD Surface Mount Battery Holders for CR2032 (draft)

2014-01-05 16:12:05 -03:00

Makefile

modules/jtrace.fpd: "jumper trace" (short cuttable trace, compatible with R)

2016-11-20 18:20:00 -03:00

mdip.fpd

mdip.fpd: 1) set mil unit 2) added measurements 3) set width = 355 mil

2012-05-23 17:28:22 +08:00

meander-2450MHz.fpd

modules/meander-2450MHz.fpd (-RELAXED): grow bottom end of the antenna by 0.1 mm

2016-09-01 00:52:31 -03:00

memcard8-amp-10100660.fpd

modules/memcard8-amp-10100660.fpd: Amphenol 10100660 footprint (draft)

2013-09-15 11:26:47 -03:00

memcard8-hirose-dm3cs.fpd

modules/memcard8-hirose-dm3cs.fpd: Hirose DM3CS memory card holder

2016-03-07 20:52:08 -03:00

memcard8-jae-st1w008s4b.fpd

modules/memcard8-jae-st1w008s4b.fpd: JAE ST1W008S4B memory card holder

2016-03-07 19:15:42 -03:00

memcard8-molex-1050270001.fpd

modules/memcard8-molex-1050270001.fpd: minimalistic memory card holder

2014-12-30 13:12:05 -03:00

mic-ra-dip.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

mini-usb.fpd

Moved mini-usb.fpd and usb_a_plug_smt.fpd from ben-wpan to kicad-libs (incoming)

2011-08-14 03:06:15 -03:00

msl0104.fpd

modules/msl0104.fpd: Rohm MSL0104 RGB LED

2016-09-14 13:16:07 -03:00

pads-array.fpd

modules/pads-array.fpd: added measurements; enabled more pads types

2012-07-13 23:01:03 -03:00

pads.fpd

modules/pads.fpd: add -NOSILK variants; add silk measurements for rectangular pads

2014-01-17 20:20:56 -03:00

phonejack.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

pogo.fpd

modules/pogo.fpd, HIERARCHY: add -SILK variants (with silk screen circle)

2015-02-19 05:13:34 -03:00

qfn.fpd

modules/qfn.fpd, HIERARCHY (QFN24-VGGD-8): "MO-220 variation VGGD-8", for XRA1201

2016-12-30 15:44:25 -03:00

qfp-gen.fpd

modules/qfp-gen.fpd: further improvements (WIP)

2012-05-29 21:52:30 -03:00

qfp.fpd

qfp.fpd: added QFP64 variant

2012-06-04 16:46:19 +08:00

rca-3-ra.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

rev-led.fpd

modules/rev-led.fpd: reverse-mounted LEDs (just 1206 for now)

2015-05-28 04:12:57 -03:00

rj45.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

sod.fpd

modules/sod.fpd (SOD-523): grow diode symbol a little (from 0.5 to 0.6 x width)

2016-04-06 10:41:01 -03:00

soic.fpd

added SOIC footprints: 8, 14 and 16 pins.

2012-05-28 13:53:41 +08:00

sot23.fpd

sot23.fpd: added measurement for max. distance between pads.

2012-06-06 11:05:40 +08:00

sot-323.fpd

Moved sot-323.fpd from ben-wpan to kicad-libs (incoming)

2011-08-14 04:49:36 -03:00

sot.fpd

modules/sot.fpd: add 236 (23-6) footprint

2013-09-15 21:42:04 -03:00

spacer.fpd

modules/spacer.fpd: add 7.5 mm clearance (bare screw/nut)

2014-01-31 14:41:06 -03:00

ssop.fpd

modules/ssop.fpd: add TSSOP-16

2012-11-02 23:34:45 -03:00

stdpass.fpd

modules/stdpass.fpd (xtal2-3.2mmx1.5mm): add crystal footprint

2014-05-20 14:49:00 -03:00

stqfn20.fpd

modules/stqfn20.fpd: forgot to commit

2016-09-14 13:16:50 -03:00

sw-spdt-smt.fpd

modules/sw-spdt-smt.fpd: add SW-CUS12B (for Copal CUS-12B and C&K PCM12SMTR)

2014-01-07 21:07:59 -03:00

tact-4-rect-smt.fpd

modules/tact-4-rect-smt.fpd: forgot to commit (reported by Alvaro Gamez Machado)

2016-12-10 14:52:55 -03:00

tactile-sw-spst-ra-dip.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

template.pro

modules/: "make brd" opens pcbnew for footprint examination

2012-12-20 22:42:55 -03:00

to.fpd

modules/to.fpd (TO-252): remove zero-width pad 2

2012-07-12 04:36:51 -03:00

tsop.fpd

tsop.fpd: changed measurements and moved marker to be close to pin1's left side.

2012-06-05 22:19:26 +08:00

tssop5.fpd

modules/tssop5.fpd: remove zero-width pad 5

2012-07-12 04:38:38 -03:00

tswa.fpd

modules/tswa.fpd: add more measurements

2013-09-20 20:30:33 -03:00

usb_a_plug_smt.fpd

modules/usb_a_plug_smt.fpd: mixed TH/SMT; change the two TH pads to "bare"

2012-07-19 00:04:29 -03:00

usb_a_rcpt_mid.fpd

modules/usb_a_rcpt_mid.fpd: enlarge 48458 bay by tolerance

2014-01-18 16:09:33 -03:00

usb_a_rcpt_smt.fpd

modules/usb_a_rcpt_smt.fpd: USB A receptacle

2013-10-25 20:45:38 -03:00

usb-a-dual-recept-r.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

usb-a-pcb.fpd

modules/usb-a-pcb.fpd: change pad type from "normal" to "bare"

2012-07-18 23:41:26 -03:00

vson-powerpad.fpd

modules/vson-powerpad.fpd: thermally enhanced 10-DFN, for TI TPS6102x

2016-03-30 04:48:03 -03:00

xlr-plug.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

xlr-socket.fpd

modules/: make pads of all fully through-hole components "bare"

2012-07-19 00:02:05 -03:00

xtal-2.fpd

xtal-2.fpd: added 2-pins smd xtal pattern -> xtal2-11.5mmx4.83mm

2012-06-07 13:42:15 +08:00

xtal-4.fpd

xtal-4.fpd: added xtal4-5mmx3.2mm variant package

2012-06-07 14:37:28 +08:00

zx62-b-5pa.fpd

modules/zx62-b-5pa.fpd: add ZX62R-B-5P (Micro-USB B reversed) footprint

2013-09-25 13:17:57 -03:00

zx62m-b-5p.fpd

modules/zx62m-b-5p.fpd: add Y size of rear pads

2012-08-03 20:24:32 -03:00