Merge branch 'xburst' of git@projects.qi-hardware.com:openwrt-xburst into xburst

2024-11-24 22:02:27 +02:00 · 2009-11-20 19:38:21 +01:00 · 2009-11-20 19:38:21 +01:00 · 0c0247d223
commit 0c0247d223
parent a5b5e808a5 df58b94fba
5 changed files with 53 additions and 19 deletions
--- a/target/linux/xburst/config-2.6.31
+++ b/target/linux/xburst/config-2.6.31
@ -137,6 +137,7 @@ CONFIG_HW_CONSOLE=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_GPIO_BUTTONS is not set
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_INPUT_YEALINK is not set
@ -150,6 +151,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_IP_PNP_RARP is not set
 CONFIG_IRQ_CPU=y
 CONFIG_JBD=y
+# CONFIG_JFFS2_FS is not set
 CONFIG_JZ4740_ADC=y
 CONFIG_JZ4740_QI_LB60=y
 CONFIG_JZRISC=y
@ -163,7 +165,6 @@ CONFIG_KEYBOARD_MATRIX=y
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_LBDAF=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_GPM940B0=y
 # CONFIG_LCD_ILI9320 is not set
@ -192,6 +193,7 @@ CONFIG_MACH_JZ=y
 # CONFIG_MACH_TX49XX is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_MIKROTIK_RB532 is not set
+# CONFIG_MINI_FO is not set
 CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MIPS_FPU_EMU is not set
@ -225,6 +227,7 @@ CONFIG_MTD_UBI_WL_THRESHOLD=4096
 # CONFIG_NET_SCHED is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NO_IOPORT is not set
 # CONFIG_NXP_STB220 is not set
 # CONFIG_NXP_STB225 is not set
@ -252,7 +255,7 @@ CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 CONFIG_SDIO_UART=y
 CONFIG_SECCOMP=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 CONFIG_SERIO=y
 # CONFIG_SERIO_I8042 is not set
 CONFIG_SERIO_LIBPS2=y
@ -296,6 +299,7 @@ CONFIG_SPI_BITBANG=y
 CONFIG_SPI_GPIO=y
 CONFIG_SPI_MASTER=y
 # CONFIG_SPI_SPIDEV is not set
+# CONFIG_SQUASHFS is not set
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_SYN_COOKIES is not set
@ -308,7 +312,7 @@ CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_TRAD_SIGNALS=y
 CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
 # CONFIG_UBIFS_FS_DEBUG is not set
 CONFIG_UBIFS_FS_LZO=y
 # CONFIG_UBIFS_FS_XATTR is not set
--- a/target/linux/xburst/files-2.6.31/arch/mips/jz4740/board-qi_lb60.c
+++ b/target/linux/xburst/files-2.6.31/arch/mips/jz4740/board-qi_lb60.c
@ -7,8 +7,8 @@
 * Author: Xiangfu Liu <xiangfu@qi-hardware.com>
 *
 * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 3 as
- * published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License version 2 or later 
+ * as published by the Free Software Foundation.
 */

 #include <linux/kernel.h>
--- a/target/linux/xburst/image/u-boot/patches/0001-add-xburst-platform-files.patch
+++ b/target/linux/xburst/image/u-boot/patches/0001-add-xburst-platform-files.patch
@ -1,13 +1,13 @@
-From 0e135685e7045f606feb6ffc8f2b159e87fcd389 Mon Sep 17 00:00:00 2001
+From 23f08521fd9f997876d5e90354b9ad957bb4e982 Mon Sep 17 00:00:00 2001
 From: Xiangfu Liu <xiangfu@qi-hardware.com>
-Date: Fri, 30 Oct 2009 14:49:02 +0800
-Subject: [PATCH] add new file
+Date: Wed, 18 Nov 2009 23:23:56 +0800
+Subject: [PATCH 1/2] add new file

 ---
 board/qi_lb60/Makefile            |   38 +
 board/qi_lb60/config.mk           |   31 +
 board/qi_lb60/flash.c             |   50 +
- board/qi_lb60/qi_lb60.c           |  103 +
+ board/qi_lb60/qi_lb60.c           |  105 +
 board/qi_lb60/u-boot-nand.lds     |   63 +
 board/qi_lb60/u-boot.lds          |   63 +
 cpu/mips/jz4740.c                 |  574 +++++
@ -33,7 +33,7 @@ Subject: [PATCH] add new file
 nand_spl/board/qi_lb60/config.mk  |   34 +
 nand_spl/board/qi_lb60/u-boot.lds |   63 +
 nand_spl/nand_boot_jz4740.c       |  456 ++++
- 29 files changed, 13573 insertions(+), 0 deletions(-)
+ 29 files changed, 13575 insertions(+), 0 deletions(-)
 create mode 100644 board/qi_lb60/Makefile
 create mode 100644 board/qi_lb60/config.mk
 create mode 100644 board/qi_lb60/flash.c
@ -203,7 +203,7 @@ index 0000000..891c604
 +}
 diff --git a/board/qi_lb60/qi_lb60.c b/board/qi_lb60/qi_lb60.c
 new file mode 100644
-index 0000000..572d22b
+index 0000000..d13f2ab
 --- /dev/null
 +++ b/board/qi_lb60/qi_lb60.c
@@ -0,0 +1,105 @@
@ -12915,7 +12915,7 @@ index 0000000..2840bc0
 +#endif /* __JZ4740_H__ */
 diff --git a/include/configs/qi_lb60.h b/include/configs/qi_lb60.h
 new file mode 100644
-index 0000000..e78d17f
+index 0000000..02af607
 --- /dev/null
 +++ b/include/configs/qi_lb60.h
@@ -0,0 +1,213 @@
@ -12965,8 +12965,8 @@ index 0000000..e78d17f
 +#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAUL)
 +#define CONFIG_BOOTDELAY	0
 +#define CONFIG_BOOTFILE		"uImage"	/* file to load */
-+#define CONFIG_BOOTARGS		"mem=32M console=ttyS0,57600n8 rootfstype=jffs2 root=/dev/mtdblock2 rw rootwait"
-+#define CONFIG_BOOTCOMMAND	"nand read 0x80600000 0x400000 0x300000;bootm"
+#define CONFIG_BOOTARGS		"mem=32M console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
+#define CONFIG_BOOTCOMMAND	"nand read 0x80600000 0x400000 0x200000;bootm"
 +
 +/*
 + * Command line configuration.
@ -13814,5 +13814,5 @@ index 0000000..924a47a
 +	(*uboot)();
 +}
 -- 
-1.6.0.4
+1.6.3.3

--- a/target/linux/xburst/image/u-boot/patches/0002-add-xburst-support.patch
+++ b/target/linux/xburst/image/u-boot/patches/0002-add-xburst-support.patch
@ -1,7 +1,7 @@
-From 7d8029d27d53b04b223a638de4fc726f6c68359f Mon Sep 17 00:00:00 2001
+From 7f32a7a2ec1cf7472684869a5cec40013134c92b Mon Sep 17 00:00:00 2001
 From: Xiangfu Liu <xiangfu@qi-hardware.com>
-Date: Wed, 21 Oct 2009 11:02:22 +0800
-Subject: [PATCH] add qi_lb60 support
+Date: Wed, 18 Nov 2009 23:24:14 +0800
+Subject: [PATCH 2/2] add-xburst-support

 ---
 Makefile                       |   10 +
@ -1585,5 +1585,5 @@ index 07e356d..4654bf4 100644
 +
 +#endif /* !CONFIG_JzRISC */
 -- 
-1.6.0.4
+1.6.3.3

--- a/target/linux/xburst/image/u-boot/patches/0003-disable-init-gpio-as-uart0.patch
+++ b/target/linux/xburst/image/u-boot/patches/0003-disable-init-gpio-as-uart0.patch
@ -0,0 +1,30 @@
+From 6901dd7d88680eb08b9bd3000244aa8003d0de9f Mon Sep 17 00:00:00 2001
+From: Xiangfu Liu <xiangfu@qi-hardware.com>
+Date: Fri, 20 Nov 2009 23:29:31 +0800
+Subject: [PATCH] disable init gpio as uart0
+
+---
+ board/qi_lb60/qi_lb60.c |    6 ++++--
+ 1 files changed, 4 insertions(+), 2 deletions(-)
+
+diff --git a/board/qi_lb60/qi_lb60.c b/board/qi_lb60/qi_lb60.c
+index d13f2ab..d87619c 100644
+--- a/board/qi_lb60/qi_lb60.c
+++ b/board/qi_lb60/qi_lb60.c
+@@ -25,9 +25,11 @@ static void gpio_init(void)
+ 	__gpio_as_sdram_32bit();
+ 
+ 	/*
+-	 * Initialize UART0 pins
+	 * Initialize UART0 pins, in Ben NanoNote uart0 and keyin8 use the
+	 * same gpio, init the gpio as uart0 cause a keyboard bug. so for
+	 * end user we disable the uart0
+ 	 */
+-	__gpio_as_uart0();
+	/* __gpio_as_uart0(); */
+ 
+ 	/*
+ 	 * Initialize LCD pins
+-- 
+1.6.3.3
+