qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-17 20:36:17 +02:00
Code
24,620 Commits 13 Branches 0 Tags 117 MiB
3f624942ff
Commit Graph

270 Commits

Author SHA1 Message Date
juhosg
06483eda3d ar71xx: add profile and build image for the TL-WA701N/ND boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:54 +00:00
juhosg
2b1cf2b32c ar71xx: add support for TP-Link TL-MR3020 
This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-04 17:30:47 +00:00
juhosg
ced006ab54 ar71xx: add profile and build factory image for the Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:29 +00:00
juhosg
adfe1a4686 ar71xx: build images for the ALFA Network N2/N5 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-01-01 19:30:28 +00:00
nbd
cdf64b5cdc ar71xx: add support for the wzr-hp-g300nh2 
Signed-off-by: Mark Deneen <mdeneen@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-18 22:20:17 +00:00
juhosg
c0f6abcdc6 ar71xx: use 64kraw template on more TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-17 18:49:55 +00:00
juhosg
867f0fa967 ar71xx: build images for TL-WR741N/ND v2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:48 +00:00
juhosg
60c6b42122 ar71x: use raw squashfs images for TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:46 +00:00
juhosg
6c3fe396cd ar71xx: create a template for using unpadded squashfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:45 +00:00
juhosg
f2945360c1 ar71xx: put squash image right after the kernel on TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-15 22:03:44 +00:00
juhosg
032d881496 ar71xx: build image for the Hornet-UB board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-14 20:54:11 +00:00
juhosg
8b3380fefc ar71xx: get rid of squashfs-4k images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 20:41:24 +00:00
juhosg
6caa8876b2 ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2 
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-13 14:59:40 +00:00
juhosg
aa54ff79a0 ar71xx: fix WNDR3x00 factory image generation 
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.

This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-07 06:55:50 +00:00
juhosg
56124f8782 ar71xx: create firmware image for the TL-WR740N/ND v4 boards 
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29468 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 16:26:44 +00:00
juhosg
a00ddbec78 ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29467 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 16:26:43 +00:00
juhosg
8e71900eeb ar71xx: fix TL-MR3x20 profile names in image/Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 13:53:21 +00:00
juhosg
05a6361449 ar71xx: cleanup TP-Link profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29461 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-06 10:29:25 +00:00
juhosg
baf6222ae5 ar71xx: reclaim some unused space on TP-Link boards 
With the default OpenWrt configuration, this increases the size
of the rootfs_data partition by 384KB/128KB on the older/newer
TP-Link models.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29447 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:36 +00:00
juhosg
7b716ce3ec ar71xx: use the lzma-loader on TP-Link boards w/o lzma support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:28 +00:00
juhosg
057c5990c9 ar71xx: add lzma loader 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29443 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:52:25 +00:00
nbd
c1679af6b3 ar71xx: add preliminary support for wzr-hp-g450h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 14:20:51 +00:00
juhosg
44a7438217 ar71xx: rewrite WNDR3700/3800 handling 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 13:03:54 +00:00
juhosg
71573bb739 ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29431 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-05 12:47:53 +00:00
juhosg
4a763a41d3 ar71xx: create initramfs images for the newer TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29410 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:57:23 +00:00
juhosg
7d80e1897f ar71xx: reclaim unused space in WNDR3700/3800 images 
Patch by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29406 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-03 16:33:38 +00:00
juhosg
f688ec4123 ar71xx: add a profile and build image for the OM2P board 
[juhosg: the name of the final image has been changed to
'openwrt-ar71xx-generic-om2p-squashfs-factory.bin']

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29397 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:49:05 +00:00
juhosg
41d8ed17e0 ar71xx: add support for Ubiquiti AirRouter 
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-12-01 22:49:02 +00:00
juhosg
4baa5f5378 ar71xx: fix wndr3800 machine name 
This fixes the machine name in /proc/cpuinfo and luci status page machine name.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:38 +00:00
juhosg
31fef29134 ar71xx: copy atheros initramfs images to the image directory 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29325 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:35 +00:00
juhosg
1427b1d16a ar71xx: specify mtd layout in command line for the DB120 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29324 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-24 20:09:32 +00:00
juhosg
ebf7a3e2f9 ar71xx: change generated Buffalo firmware versions 
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28815 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 21:34:32 +00:00
juhosg
1823bd18f8 ar71xx: fix WHR-HP-G300N firmware partition offset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28810 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 20:24:57 +00:00
juhosg
8853be8e17 ar71xx: build image for the Buffalo WHR-HP-GN 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28806 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:11 +00:00
juhosg
24f3dbc411 ar71xx: build image for the Buffalo WHR-G301N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28804 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:08 +00:00
juhosg
e1c0ad196a ar71xx: fix WHR-HP-G300N image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28802 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-07 12:59:05 +00:00
juhosg
fc6e7aeeb6 ar71xx: build image for the TL-WR741ND v4 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28708 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-11-01 11:20:55 +00:00
juhosg
e160695e43 ar71xx: fix typos in image/Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28618 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-27 07:54:52 +00:00
juhosg
b4979fee64 ar71xx: create image for the WNDR3800 
This adds support for the Netgear WNDR3800, it is almost the same as
the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28597 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-26 06:12:47 +00:00
juhosg
165b64f3f8 ar71xx: build image for the Buffalo WHR-HP-G300N 
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28568 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:29 +00:00
juhosg
0475f34e05 ar71xx: build image for the Allnet ALL0258N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28565 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-10-24 21:49:23 +00:00
juhosg
e6dc3fc7e8 ar71xx: build images for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28279 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:56 +00:00
juhosg
53b7e66b1c ar71xx: create image for the TP-Link TL-WR743ND v1 
Same hardware as WR741ND but with PoE support.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28271 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:44 +00:00
juhosg
36b03a3e5b ar71xx: create image for the TP-Link TL-WR740N v3 
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28269 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-09-21 11:47:40 +00:00
nbd
733ef74e71 ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27950 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-10 22:24:56 +00:00
juhosg
1cdb033fe9 ar71xx: fix image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27907 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-05 10:31:52 +00:00
juhosg
45aa4b5327 ar71xx: cleanup image generation Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27899 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-08-04 19:41:16 +00:00
jogo
e5839cb102 ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH 
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27814 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-28 11:57:51 +00:00
juhosg
d3310ebab9 ar71xx: build image for the AP121 boards with 4M of flash 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27523 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-07 13:01:50 +00:00
juhosg
ff21374f6a ar71xx: fix building of squashfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27446 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-04 12:10:03 +00:00
juhosg
547c706620 ar71xx: use 4k image only for the AP121 board 
Create optimized 64K images with the new padjffs2 tool and use that
images instead of the 4k ones. The 4k images causes problems on devices
where the flash erase size is 64 KB.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27357 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-07-02 08:37:59 +00:00
nbd
1eeba399c6 ar71xx: add profile and image building code for wzr-hp-ag300h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27076 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-06-01 02:23:30 +00:00
juhosg
269c6430d7 ar71xx: build images for the AP121 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27070 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:47 +00:00
juhosg
68169c24f2 ar71xx: stop producing -NA factory images and tag factory images with hd_id for WNDR3700v2 
NETGEAR doesn’t produce a distinct North American image for
WNDR3700v2, they use the same image worldwide. This is a change from
earlier models such as WNDR3700 (v1). NETGEAR's v2 images now contain
an "hd_id" parameter, as well. All observed WNDR3700v2, WNDR3800, and
WNDRMAC images use 29763654+16+64 as their hd_id value.

This patch changes the OpenWrt WNDR3700v2 "factory" image generation
to stop producing the extraneous -NA version and to tag the image with
the same hd_id used in NETGEAR's images.

There is no change to WNDR3700 (v1) image generation, as NETGEAR
continues to produce distinct -NA and worldwide images, neither of
which are tagged with hd_id.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27053 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:25 +00:00
juhosg
fc50c6a3b6 ar71xx: create factory images for the WZR-HP-G30{0,1}NH boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27051 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:22 +00:00
juhosg
92e4bfb535 ar71xx: reduce the size of the squashfs-4k binaries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27047 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-05-31 22:53:18 +00:00
juhosg
73318c1013 ar71xx: don't hardcode console parameters in kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26605 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-12 13:14:53 +00:00
juhosg
b47906964d ar71xx: Add support for WZR-HP-G301NH 
Add support for the Buffalo WZR-HP-G301NH. The only difference between it
and the WZR-HP-G00NH is that it has a RTL8366RB instead of a RTL8366S.
Since we don't do runtime detection of the switch, we need a separate
machine definition for it.

While we are at it, also rename the profile to reflect that it now is for
more than one device.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26601 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-12 09:29:10 +00:00
juhosg
930932005d ar71xx: build firmware image for the Atheros DB120 board 
Signed-off-by: Jaiganesh Narayanan <jnarayanan@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26519 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-04-07 20:53:23 +00:00
jow
957986717f [ar71xx] fix image generation in the Image Builder environment 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26271 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-22 18:56:55 +00:00
juhosg
ae81dbbb22 ar71xx: add support for the TP-Link TL-WA901ND v2 board 
Patch-by: Jonathan Benett <jbscience87@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26119 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-03-13 15:08:31 +00:00
juhosg
2f9a16818c ar71xx: create firmware image for the WNDR3700v2 board 
Patch-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25119 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-26 20:35:44 +00:00
juhosg
f742b2d746 ar71xx: rework WNDR3700 image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24983 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 10:37:14 +00:00
juhosg
6e0592661e ar71xx: build separate image for the WNDR3700 with NA region 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24982 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2011-01-14 10:37:11 +00:00
juhosg
8daecfbcff ar71xx: add support for TL-WR740N v1 
Same as TL-WR741ND but with different hardware ID and without
detachable antenna.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24811 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-23 12:42:16 +00:00
juhosg
9bdc5b83af ar71xx: add support for the jjPlus JA79PF 
Patch-by: Cezary Jackiewicz

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24440 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:51 +00:00
juhosg
ddbca99fbc ar71xx: add support for the TP-LINK TL-MR3220 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24439 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 17:57:48 +00:00
nbd
c5d8ec2df5 ar71xx: do not throw compile errors if the nbg460n uboot is not selected 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24426 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 16:07:27 +00:00
juhosg
680d895a87 ar71xx: add nbg460n image generation 
This adds image generation for NBG460N/550N/550NH boards.

Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24419 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-12-10 15:17:03 +00:00
jow
848e1c833e [ar71xx] add a new image for the TEW-652BRP which can be used with the bootloader recovery option 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24196 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-30 02:04:57 +00:00
claudio
b59add4dfd [ar71xx] Add support for Ubiquiti UniFi AP 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23904 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-11-06 21:08:48 +00:00
juhosg
97627d06c5 ar71xx: initial support for jjPlus JWAP003 
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>

(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23165 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-10-01 07:09:29 +00:00
juhosg
9ddf78a6b3 ar71xx: build firmware image for the TL-MR3420 v1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23138 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:54:04 +00:00
juhosg
7576a0c62c ar71xx: build firmware image for the TL-WR841N v7 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23134 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 14:53:54 +00:00
nbd
4fa1e52b3a Add support for Atheros AP96 reference board 
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.

mach-ap96.c is based on mach-wndr3700.c.

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23125 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-27 08:59:53 +00:00
juhosg
217d24ebbd ar71xx: build firmware images for the Zcomax boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22884 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-09-03 18:14:43 +00:00
nbd
858ebac7b8 ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528, without the ethernet fifo cfg values) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22353 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-07-22 12:37:44 +00:00
juhosg
8119ffe60a ar71xx: add support for the Senao EAP7660D board 
This patch adds support for the Senao EAP7660D board to trunk.

Signed-off-by: Daniel Golle <daniel.golle@gmail.com>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21837 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-06-18 16:22:05 +00:00
juhosg
9dd80fbdfc ar71xx: build firmware images if Minimal profile is selected 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21684 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-06-06 17:41:39 +00:00
nbd
d04eedfa0d ar71xx: use the lzma kernel and a proper size limit for pb92 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-05-08 20:06:44 +00:00
juhosg
91734ca2fa ar71xx: create separate 'factory' and 'sysupgrade' images for the Planex 
boards


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21175 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-26 18:28:10 +00:00
juhosg
9bca18c255 ar71xx: build different firmware images for the DIR-825-Bx boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21171 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-26 18:27:58 +00:00
juhosg
1bcf4b2473 ar71xx: create smaller sysupgrade images for the WRT400N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21170 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-26 18:27:54 +00:00
juhosg
b6ea50912a ar71xx: create firmware images for the TL-WR941ND v3 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21169 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-26 18:27:51 +00:00
juhosg
538d16ee7b ar71xx: create separate 'factory' and 'sysupgrade' images for the WRT160NL 
The 'factory' image requires the garbage at the end of the image.
Flashing from the original web interface does not work without that.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21168 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-26 18:27:47 +00:00
juhosg
8940134da1 ar71xx: fix mtd_layout for the DIR-615-C1 and similar devices 
* Thanks to Yury Polyanskiy for the report


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21036 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-20 08:07:25 +00:00
nbd
6b17f453aa ar71xx: fix image builds (broken by r20834) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20840 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-13 18:01:46 +00:00
nico
bca3f225e9 define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20834 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-04-12 23:15:56 +00:00
juhosg
8299299524 ar71xx: update image generation and trx header parsing for the WRT160NL 
* patch by Bernhard Loos
 * note: trailing whitespaces has been removed


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-27 17:38:36 +00:00
nbd
249a5e63b3 ar71xx: add images for pb92 - no kernel size check yet, lzma images did not yet work in my tests 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20496 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-26 22:36:02 +00:00
juhosg
b9e67435fe ar71xx: create smaller initramfs images for the TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20414 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-25 07:31:13 +00:00
juhosg
2bc9c0b6e3 ar71xx: create separated and smaller sysupgrade files for the DIR-615 and similar boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20230 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-15 11:03:38 +00:00
juhosg
698a29c8ea ar71xx: build firmware image for the Fry's FR-54RTR board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20229 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-15 11:03:36 +00:00
juhosg
6d0042cd3c ar71xx: change DIR-600-A1 image generation template, will be usable for other boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20227 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-15 11:03:31 +00:00
juhosg
0dba449179 ar71xx: create smaller sysupgrade files for the TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20121 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-10 17:41:52 +00:00
juhosg
d6a5fc493b ar71xx: simplify WP543 image generation, and fix rootfs offset 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20063 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-08 15:32:48 +00:00
juhosg
2b3fad7526 ar71xx: increase kernel partition size for the WP543 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20049 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-03-08 12:09:38 +00:00
juhosg
150c8036c8 ar71xx: create firmware images for the TL-WR941ND v4 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19749 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-02-19 11:52:33 +00:00
juhosg
34e53a802e ar71xx: create special initramfs images for the boards which does not accept standard uImages 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19245 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-20 13:26:24 +00:00
juhosg
6edd593e53 ar71xx: rename initramfs u-boot images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19244 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-20 13:26:21 +00:00
juhosg
a9dfded77b ar71xx: fix image generation for TL-WR741ND/TL-WR841ND-v5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19230 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-19 18:27:57 +00:00
juhosg
fce30da13a ar71xx: create rescue image for the WZR-HP-G300NH 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19223 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-18 16:46:57 +00:00
nbd
5ab0ca0fd5 ar71xx: fix portability errors in dd commands 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19207 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-18 00:12:15 +00:00
juhosg
7b293e59ef ar71xx: create sysupgrade file for the WZR-HP-G300NH 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19193 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-17 18:53:42 +00:00
juhosg
0ab559a23e ar71xx: add support for the D-Link DIR-600 rev. A1 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19100 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-11 08:02:10 +00:00
juhosg
5784ed61cc ar71xx: add missing flash partition for the DIR-825 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19075 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-08 13:35:25 +00:00
nbd
581aa20b16 ar71xx: fix ubntxm image builds 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19044 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-05 18:37:22 +00:00
nbd
6121cc53f6 ar71xx: clean up image fs selection templates 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19034 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-04 16:27:41 +00:00
juhosg
a7254225f3 ar71xx: add missing templates for PB4X image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19033 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-04 14:28:31 +00:00
nbd
bb578d711b ar71xx: fix generating pb4x images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19029 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-04 11:54:58 +00:00
juhosg
44fa554219 ar71xx: create firmware images for the AP81/PB42/PB44 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19011 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-02 16:30:52 +00:00
juhosg
61efbd720a ar71xx: simplify image generation a bit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19010 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2010-01-02 16:30:49 +00:00
juhosg
0bc848a5da ar71xx: change firmware image name for th TP-Link boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18895 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-22 19:36:07 +00:00
juhosg
db5288e38a ar71xx: add support for the TL-WR841N v1.5 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18893 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-22 19:31:28 +00:00
juhosg
8b5cfa1fde ar71xx: fix WNDR3700 firmware images 
WNDR3700's U-Boot loads the kernel from a squashfs image, and it does
not support squashfs 4.0.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18851 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-19 18:10:41 +00:00
nico
021f23792f [target] ar71xx: fix WNDR3700 image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18849 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-19 14:45:43 +00:00
juhosg
928a89ed7a ar71xx: separate DIR-615 rev. C1 support from the TEW-632 (based on the 
patch from #6186)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18818 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-18 12:57:01 +00:00
juhosg
bfbc6bd89d ar71xx: preliminary support for the TL-WR1043ND 
Adds board support for the TP-Link TL-WR1043ND Based on the Atheros AP81 platform.
Presently the RTL8366RB switch support is missing due to no driver.
The ethernet works with 5 ports@1Gbit but is missing vlan support.

Hope Ive done this right, First time submiting a patch.

Signed-off-by: Andrew Tarabaras <andrew@advancedtechnologies.com.au>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18696 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-08 12:46:25 +00:00
juhosg
c3035532ab ar71xx: DIR-825 support cleanup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18622 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-03 15:07:41 +00:00
juhosg
9e412c9b2e ar71xx: add support for the D-Link DIR-825 rev. B1 board (thanks to 
ValXdater)


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18621 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-12-03 15:07:34 +00:00
juhosg
e63ae33477 ar71xx: fix extension of the WNDR3700 firmware image 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18579 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-28 13:49:19 +00:00
juhosg
5b2c9aea97 ar71xx: override mtd partitions for the TEW-632BRP family 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18578 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-28 13:49:17 +00:00
juhosg
4bcc767170 ar71xx: create images for the WNDR3700, which can be flashed via the factory web interface 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18571 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-28 09:28:25 +00:00
juhosg
00f04685a2 ar71xx: create sysupgrade image for the WNDR3700 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18570 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-28 08:25:56 +00:00
juhosg
7f61c43e8f ar71xx: rename TL-WRx41 images, because newer factory web interface does 
not accept files with '.uni' extension.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-25 10:28:30 +00:00
juhosg
66818c8ce5 ar71xx: use MkImageLzma template for Ubiquiti XM devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18534 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-25 09:51:33 +00:00
juhosg
a9499f8570 ar71xx: add sysupgrade support for Ubiquiti XM boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-25 09:51:31 +00:00
juhosg
227b0b29bd ar71xx: create combined images for the RS, RS-PRO and LS-SR71 boards, and add sysupgrade support for them 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18531 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-25 09:51:25 +00:00
juhosg
916a84b6ef ar71xx: dont't build images for Ubiquiti XM devices with the Madwifi profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18530 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-25 09:51:19 +00:00
nbd
124b7a0af5 ar71xx: the squashfs-4k images are unreliable in some builds. add 4k, 8k padding to the generic squashfs images and use them on 4k devices as well 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-24 13:55:40 +00:00
nbd
cbcaeda0d6 ar71xx: use 4k erase size images for ubnt xm 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18498 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-23 17:12:59 +00:00
nbd
a2b5bdfc5d ar71xx: build images for ubnt bullet-m, rocket-m and nano-m 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-11-18 18:10:37 +00:00
juhosg
1d2b1e7279 ar71xx: add preliminary support for the TL-WR841ND v5 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18226 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 12:26:25 +00:00
juhosg
e75593217a ar71xx: simplify image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18222 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-30 12:26:10 +00:00
juhosg
9a02308cf0 ar71xx: create firmware image for WP543 boards with 4/8/16MB of flash 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18075 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-10-19 08:07:40 +00:00
juhosg
136e608800 [ar71xx] create firmware image for the WRT160NL board (thanks to Gerry Rozema) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17151 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-08-06 19:07:47 +00:00
juhosg
faa0beadbd [ar71xx] fix firmware image of the TL-WR741ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16981 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-07-25 19:50:10 +00:00
juhosg
1cf82179fe [ar71xx] create firmware image for the wrt400n board (based on a patch by Sandeep Mistry <sandeep.mistry at gmail.com>) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16793 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-07-12 09:01:13 +00:00
juhosg
eea7fc66c5 [ar71xx] increase size of the kernel partition on the TEW-632BR board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16784 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-07-11 17:15:30 +00:00
juhosg
0491fbaeca [ar71xx] create firmware image for the TL-WR741ND 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16741 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-07-07 19:58:39 +00:00
juhosg
0173d4a97d [ar71xx] don't use the CRC header in the kernel partition on the WP543 board, so the kernel can be flashed directly from OpenWrt 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16560 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-06-25 13:48:21 +00:00
juhosg
1232d185c6 [ar71xx] create jffs2 images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16374 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-06-07 20:07:32 +00:00
juhosg
e4874c2432 [ar71xx] build images for the AP83 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16357 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-06-06 13:02:25 +00:00
juhosg
6a1f0d244e [ar71xx] build firmware image for the MZK-W300NH board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16342 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-06-04 19:14:46 +00:00
juhosg
6262f561d3 [ar71xx] create firmware image for the RouterStation Pro, and add a profile for it (patch by Ubiquiti Networks) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16066 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-05-25 17:52:12 +00:00
juhosg
bf7689f4a5 [ar71xx] create image for the WRT400N board (thanks to netprince) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15828 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-05-13 20:00:42 +00:00
juhosg
ba9c1cf7f4 [ar71xx] create firmware image for the TL-WR841ND v3 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15024 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-03-24 16:11:50 +00:00
juhosg
4bd70fc262 [ar71xx] create firmware image for the Ubiquiti LS-SR71 board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14874 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-03-14 13:25:49 +00:00
juhosg
9781ac20ab [ar71xx] build firmware image for the Atlantis-Land A02-RB-W300N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14711 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-03-01 11:50:05 +00:00
juhosg
8e8ae392b5 [ar71xx] tl-wr941nd: rename firmware image 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2009-03-01 11:36:49 +00:00