nbd
ced5f69d4d
kernel: add missing config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32498 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-24 20:21:27 +00:00
acinonyx
99a635edd1
ramips: mac address detection for Fonera 2.0n
...
Detect and apply MAC address of a Fonera 2.0n (ramips)
Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 13:58:29 +00:00
florian
27abc2e19f
[mcs814x] provide an early ioremap cookie of the system configuration register
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32489 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 11:03:50 +00:00
florian
a699bb193a
[mcs814x] group SYSDBG register defines in mcs814x.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32488 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 11:03:45 +00:00
florian
01532c0031
[mcs814x] make hardware.h a forward inclusion of mcs814x.h
...
mach/hardware.h is soon to be removed by upstream kernel
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32487 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 11:03:40 +00:00
florian
4c31778fc4
[mcs814x] remove platform specific initialization from ethernet driver
...
Hardware filtering must always be enabled as long as there is an Ethernet
device registered, and use device tree for setting the link activity and
buffer shifting enable/disable bit.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 11:03:35 +00:00
florian
bc89518781
[mcs814x] regroup interrupt controller register definitions in hardware.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32485 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-23 11:03:29 +00:00
florian
0235660f48
[mcs814x] remove handle_irq callback in board-mcs8140-dt.c
...
This should have been removed in r32470.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32481 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-21 12:20:47 +00:00
florian
b6eacc06d6
[mcs814x] fix USB led triggers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32474 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 21:58:00 +00:00
florian
2af5a044d3
[mcs814x] use generic uci defaults functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 21:57:56 +00:00
florian
aa77c3e868
[mcs814x] remove uselss cache invalidations
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 21:57:53 +00:00
florian
ee556c7f7b
[mcs814x] improve ethernet driver debugging
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 21:57:49 +00:00
florian
3a5b7c7629
[mcs814x] do not use MULTI_IRQ_HANDLER it is bogus on our platform
...
This caused stalls in the Ethernet DMA block, so until properly
written and sorted out, fallback to the assembly version instead.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 21:57:45 +00:00
mirko
85bb2ebefa
[target/xburst] verified to work - remove broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-20 19:04:35 +00:00
acinonyx
9ebe427897
[x86] Fix sysupgrade for squashfs, jffs2 and ext4 images
...
* use 'fsync' with 'dd' for image writing
* save config to boot partition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32465 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 22:36:53 +00:00
florian
7c90f3b2b4
[mcs814x] add Moschip MSC814x support
...
This target currently only supports Moschip's MCS8140 SoC, but support
for other chips in the same family (MCS8142, MCS8144) will be easy to add.
Target support is entirely using Device Tree for probing peripherals.
Drivers support include:
- PCI
- USB 1 & 2
- watchdog
- random number generator
- UART
- timer
- internal Ethernet PHY
- Ethernet MAC core
Support for the following boards is included using Device Tree
- Devolo dLAN USB Extender
- Tigal RBT-832
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32462 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 14:48:56 +00:00
juhosg
5fa7ed291e
ar71xx: create profile and build image for the TL-WDR4300 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 11:51:20 +00:00
juhosg
977ff3326d
ar71xx: add user space support for the TL-WDR4300
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32460 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 11:51:18 +00:00
juhosg
ae6a363859
ar71xx: add support for the TL-WDR4300 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 11:51:17 +00:00
juhosg
31f53133c7
ar71xx: refresh patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 11:51:15 +00:00
juhosg
279cc5d283
ar71xx: make AR8327 LEDs working on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:44:17 +00:00
juhosg
7066d5e4ae
generic: ar8216: allow to configure AR8327 LEDs via platform data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:44:16 +00:00
juhosg
d02eb8cdaa
ar71xx: remove superfluous include of asm/mach-ath79/pci.h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:43 +00:00
juhosg
9e32544f7a
ar71xx: add a common function to configure USB power GPIOs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:41 +00:00
juhosg
60f2c64e65
ar71xx: correctly detect NETGEAR WNDRMAC
...
This patch helps properly detect a WNDRMAC device. Before this
patch the model is detected as "NETGEAR ?????????N".
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:38 +00:00
juhosg
f054b259d0
ar71xx: add USB LED support by default for WNDR3700/WNDR3800/WNDRMAC
...
This adds kmod-leds-wndr3700-usb package to a default build for
WNDR3700, WNDR3800 and WNDRMAC in order to support the green USB LED.
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 10:13:37 +00:00
juhosg
71c704387b
ramips: rt305x: add support for the Petatel PSR-680W Wireless CDMA Router
...
This patch adds support for the Korean made Petatel PSR-680W Wireless CDMA Router.
The platform is based on Ralink RT3052.
http://wiki.openwrt.org/toh/petatel/psr-680w
Signed-off-by: Dmitry Shmygov <shmygov at rambler.ru>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 09:52:15 +00:00
nbd
669a7a0710
ar71xx: add support for the embeddedwireless Dorin board (based on patch by embeddedwireless.de)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 00:22:04 +00:00
nbd
bd85fd265b
ar71xx: add support for reading the MAC address from OTP ROM on AR933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-19 00:21:58 +00:00
jow
4e6e9c9c59
optimize kernel config for kvm_guest
...
This patch enables few extra kernel options for the kvm_guest subtarget:
- Tickless kernel to avoid timer ticks in idle guests, reduces CPU usage
- Enable paravirtualization steal time support
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32436 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-18 23:36:50 +00:00
jow
03f2b4f961
[kvm_guest] remove inittab override
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-18 11:50:37 +00:00
florian
4666e9b56d
[brcm63xx] fix SPI message control handling for BCM6338/6348
...
BCM6338 and BCM6338 have their MSG_CONTROL register width of 8-bits instead of
16-bits. We were previously using a 16-bits write which corrupted the first
byte of the TX FIFO. Also the message type was always set to Full-duplex even
in the case of half-duplex messages.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32409 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-17 16:17:29 +00:00
nbd
50d5344375
kernel: replace the brcm47xx fuse workaround patches with a generic patch that applies to all mips targets
...
The dcache bug that it works around is a generic issue, not a brcm47xx cache quirk
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-16 21:06:33 +00:00
florian
07bc7f5147
[rdc] remove broken flags
...
Thanks to Nicolas Le Falher for testing on Bifferboard.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-16 16:45:28 +00:00
jow
f1d9712dc3
[x86] use ttyS0 @ 115200 baud as default for KVM guests
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32384 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-15 12:59:49 +00:00
luka
69934f5a34
kirkwood: fix typo in uci-defaults/leds
...
Signed-off-by: Martin Mueller <mm@sig21.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32343 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-13 18:41:42 +00:00
nbd
2d3cf7a902
ar71xx: swap the PHY address of the ethernet port of TL-MR3040/TL-MR11U similar to TL-MR3020 to fix ethernet link detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32336 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-13 12:54:22 +00:00
jogo
d8ff69c0da
bcm63xx: readd accidentially dropped ignore_oc in ehci driver
...
fixes overcurrent warning spam on 3.3 kernels for bcm63xx again.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32221 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-11 22:24:58 +00:00
luka
5a35428cb3
kirkwood: ib62x0 fix reboot
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32131 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-08 23:17:46 +00:00
nbd
cc530eb3af
xburst: remove an obsolete CompareKernelPatchVer call
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32115 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-07 16:32:44 +00:00
florian
816d0cbd39
[brcm63xx] fix 553-board_96348w3.patch patch wrt gpio-keys-polled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 20:58:45 +00:00
nbd
c437387d32
ar71xx: fix LZMA loader build regression from r32090 (thx, juhosg)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 19:37:49 +00:00
nbd
b899b1d3a5
kernel: add a few more tracing related symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 18:04:00 +00:00
nbd
eed1fe974e
ar71xx: fix PHY setup on TL-MR3020 ( fixes #11572 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:12 +00:00
nbd
62977660d8
ar71xx: add a helper function for setting up PHY4 swapping on ar933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32092 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:09 +00:00
nbd
7ea20fba6a
ar71xx: only build all loader images if the image builder is enabled - saves some time on make target/install
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 17:24:01 +00:00
florian
d19ba29311
[brcm63xx] fix alarm led color for board 96348A-122
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 16:07:46 +00:00
florian
0e5685072e
[brcm63xx] add 96348w3 board ( #10764 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:45:04 +00:00
florian
84fcf0bb00
[brcm63xx] update livebox board support ( #8677 )
...
Merge most fixes from #8677 :
- add basic hardware detection of Livebox Blue 5g revisions
- register leds and gpio buttons
- fix boot address location
- properly parse mac addresses
Plus some more fixes:
- make board_livebox.c more in line with board_bcm963xx.c
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:44:56 +00:00
florian
adfadea95e
[brcm63xx] fix leds naming for all bcm63xx boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:44:52 +00:00
nbd
32b9ee0930
kernel: make tracing support configurable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 15:25:57 +00:00
florian
3d0fed711e
[brcm63xx] backport upstream spi-bcm63xx fixes
...
* message pump conversion
* not using stopping state
* setting spi driver mode bits
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 13:31:33 +00:00
florian
28f01f0d91
[generic/3.3] backport spi message queue infrastructure
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 13:31:30 +00:00
florian
a7a19483fb
[brcm63xx] increase led number in patch 301-led_count.patch
...
So that board patches are only touching board-related code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32076 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-06 13:31:24 +00:00
blogic
9216dfc76c
[lantiq] clean up generic image building
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32065 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 17:49:42 +00:00
florian
6255930f93
[brcm63xx] fix board patches so that new boards are withing appropriate ifdef
...
Some new board definitions were added within the #ifdef CONFIG_CPU_6338
section while some other were added within #ifdef CONFIG_CPU_6345, fix this
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32060 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 13:40:41 +00:00
florian
c7d60bd0db
[kernel/3.3] refresh generic patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32059 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 13:40:38 +00:00
florian
a6691cb6b1
[brcm63xx] fix bisectability of patch 303-spi-board-info.patch
...
It uses spi_register_board_info() from linux/spi/spi.h but does not include it
explicitely.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 13:40:35 +00:00
blogic
466d98bf88
[kernel] bump to 3.3.8
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32055 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 06:57:51 +00:00
luka
576ea25936
kirkwood: reorganize target
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32053 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-05 00:43:56 +00:00
luka
090fe17a5f
uboot-envtools: update to 2012.04.01
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32051 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-04 21:55:49 +00:00
jogo
43bdeca579
bcm63xx: fix ethernet on 96328avng and 963281TAN
...
The internal switch did not get registered.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-04 08:35:25 +00:00
blogic
35d604e713
[lantiq] adds unset Kbuild symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 14:03:32 +00:00
juhosg
f6bfa9b749
malta: remove 3.2 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32023 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 12:06:28 +00:00
juhosg
8f3ef842f5
malta: use common kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 12:06:26 +00:00
juhosg
e17a638412
xburst: add missing config symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-02 12:06:15 +00:00
blogic
b9f376d33a
[kernel] adds patch to make Tantos (psb6970) switch buildable again
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32006 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 17:41:28 +00:00
jogo
f91824b22d
bcm63xx: build images for 6328 reference boards with various flash sizes
...
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.
Known issues:
* Button setup unknown, thus no fail-safe available.
* All other BCM6328 and BCM63XX issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 10:27:46 +00:00
jogo
99b853b6b3
bcm63xx: readd accidentially dropped network config for SPW303V
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 10:27:42 +00:00
juhosg
7cab23d0dc
generic: ar8216: add revision specific PHY fixups for AR8327
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:27 +00:00
juhosg
72df0a7c48
generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:26 +00:00
juhosg
6d10d89b29
generic: ar8216: add chip_is_ar8{216,236,316,327} helpers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:24 +00:00
juhosg
3ffc68003f
ar71xx: add default LED setup for the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31997 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:23 +00:00
juhosg
ab5576542a
cns21xx: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31996 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:22 +00:00
juhosg
014e1ffa51
lantiq: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31995 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:21 +00:00
juhosg
09f48c381b
kirkwood: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:20 +00:00
juhosg
93945c8815
ramips: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:18 +00:00
juhosg
22ae6b82eb
ar71xx: use the generic uci-default functions for initial LED setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:17 +00:00
juhosg
3a3aa7378b
kirkwood: use uci-defaults to configure different boards
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:15 +00:00
juhosg
436c9f6d34
ramips: WAN LED for D-Link DIR-300-B1
...
Add led devices for D-Link DIR-300-B1 WAN LED.
Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.
Closes: https://dev.openwrt.org/ticket/11326
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
on the WAN interface]
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 16:39:03 +00:00
nbd
8c1c75ba17
ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 20:39:50 +00:00
nbd
0f299fab07
ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31934 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-28 02:55:59 +00:00
nbd
dfea949949
ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31925 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:41 +00:00
nbd
295c63c334
kernel: fix suppressing -s for linking modules when profiling is enabled
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 21:02:36 +00:00
juhosg
d3fa7efc8c
ar71xx: fix TL-WR1041 image size
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31923 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:21:47 +00:00
juhosg
75c71fcaa0
ramips: rt3883: add device registration code for the SPI controller
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31922 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:10:00 +00:00
juhosg
84b342399c
ramips: allow to use the SPI driver on RT3662/RT3883
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31921 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:58 +00:00
juhosg
1e3e199faa
ramips: rt3883: fix GPIO reservation for the SPI pins
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31920 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:56 +00:00
juhosg
0c9cb51fbb
ramips: rt305x: remove superfluous controller_data assignment
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31919 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:52 +00:00
juhosg
ce2fd1dbc9
ramips: make rt2x00 firmware extraction quiet
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31918 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:50 +00:00
juhosg
39068e8b25
generic: rtl8367: rename a misnamed variable
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31917 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:47 +00:00
juhosg
11d6be39a6
generic: rtl8366_smi: remove duplicated spinlock initialization
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31916 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:45 +00:00
juhosg
63d3e3114d
generic: rtl8366_smi: rename debugfs Kconfig symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31915 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:43 +00:00
juhosg
5a1c605a9e
generic: rtl8367: allow to use VLANs > 31
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31914 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 17:09:41 +00:00
blogic
e4b72001f6
[lantiq] move files-3.3 -> files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31912 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:13:02 +00:00
blogic
c9e0ccf07c
[lantiq] 3.2 R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31911 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:12:59 +00:00
blogic
c8e24ec13e
[lantiq] dgn3500 support with eeprom loading from sysfs
...
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules. I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.
SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.
Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.
Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31910 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:22 +00:00
blogic
f72e7bf12d
[lantiq] fixes zyxel p2601hnfx
...
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31909 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:20 +00:00
blogic
2b03aafe31
[lantiq] Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31908 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:02:16 +00:00
nbd
95d801c59d
kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31906 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:16:37 +00:00
juhosg
fe77f5d922
linux/3.2: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31905 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:37 +00:00
juhosg
1ee6958324
xburst: remove support for old kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31904 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:35 +00:00
juhosg
287550be20
xburst: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31903 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:33 +00:00
juhosg
8f313bd0fd
xburst: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31902 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:32 +00:00
juhosg
e2dd39f3dc
ppc44x: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31901 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:30 +00:00
juhosg
14aefb43c8
ppx44x: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31900 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:28 +00:00
juhosg
5061f8857c
ppc44x: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31899 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:27 +00:00
juhosg
000012926a
cobalt: switch to 3.3 and add broken flag
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31898 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:26 +00:00
juhosg
bc9bf715d9
ep93xx: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31897 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:24 +00:00
juhosg
dee80699d1
ep93xx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:23 +00:00
juhosg
a195c06c00
ep93xx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:21 +00:00
juhosg
e468dc1413
au1000: remove 3.2 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:18 +00:00
juhosg
accbbf39c0
au1000: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:17 +00:00
juhosg
5c8cc31fb8
au1000: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:15 +00:00
juhosg
e3e4a95d9b
linux/3.1: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31891 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:09 +00:00
juhosg
e17d6b0709
omap24xx: remove 3.1 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31890 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:07 +00:00
juhosg
4ea55a169b
omap24xx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31889 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:05 +00:00
juhosg
c7e92c13d2
cns3xxx: remove 3.1 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31888 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:03 +00:00
juhosg
a27b48f2d8
cns3xxx: switch to 3.3 and add broken flag
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31887 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 15:01:02 +00:00
nbd
4cf70ab2e1
kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 14:43:58 +00:00
jogo
878544bb07
bcm63xx: build images for DSL-274XB revision F1
...
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.
Known issues:
* wifi led inverted (on when wifi is off and vice cersa)
* same issues as generic bcm6328 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:51 +00:00
jogo
092e90e1ef
bcm63xx: add ath9k to atheros wifi profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31884 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:48 +00:00
jogo
f095146c5d
bcm63xx: enable bcm6328 support and required drivers
...
BCM6328 support is in a usable state, with the following issues
* internal switch port not configurable
* external phys not supported
* broadcom wifis will probably not work correctly
* and all other generic bcm63xx issues (so yes, still no ADSL)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31883 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:46 +00:00
jogo
cbdf1f350a
bcm63xx: add support for DSL-274XB rev F1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31882 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:43 +00:00
jogo
5a482fc8b3
bcm63xx: fix port state after network down
...
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31881 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:40 +00:00
jogo
0bdb7cbf98
bcm63xx: add a fixup for ath9k devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31880 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:37 +00:00
jogo
d1683ec919
bcm63xx: add support for the HSSPI controller
...
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31879 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:33 +00:00
jogo
35f8e31243
bcm63xx: add preliminary support for bcm6328
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:29 +00:00
jogo
c9204063aa
bcm63xx: add flash type detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31877 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:25 +00:00
jogo
fdbaed3349
bcm63xx: pad Speedport W303 V images to 4 MiB
...
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:22 +00:00
jogo
34f9a0d745
bcm63xx: add a default switch configuration for DSL-274XB
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:17 +00:00
jogo
3df0e1587c
bcm63xx: setup network config through uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31873 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:14 +00:00
jogo
acbbcb35b8
bcm63xx: move the board name workaround to /lib/brcm63xx.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31872 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:11 +00:00
jogo
2c54f4168e
bcm63xx: use the exact board id as board identification string
...
No need to keep the bcm63xx/ at the start or the chipid info at the end.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31871 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 13:22:08 +00:00
nbd
2ab926c84b
kernel: fix a warning in the connmark module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31856 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-24 18:25:08 +00:00
juhosg
530802ba69
kernel: update linux 3.3 to 3.3.7
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:32 +00:00
juhosg
71526f8705
ar71xx: fix an insignificant typo
...
Patch from #11485 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31847 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:30 +00:00
juhosg
e9ac406967
ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
...
Patch by Kamil Trzciński <ayufan@osk-net.pl>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31846 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:25 +00:00
juhosg
e61440d8bd
ar71xx: add support for TP-Link TL-MR3040
...
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31845 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:24 +00:00
juhosg
4a1bbe457a
ramips: Add byte queue limits support to net/ethernet/ramips_main.c
...
Add byte queue limits support to net/ethernet/ramips_main.c
"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:23 +00:00
juhosg
7d9b449118
ramips: Enable sysupgrade for Sitecom WL-351
...
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:22 +00:00
juhosg
8a8504629a
linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
...
Should fix #11513 . Tested with the x86/generic squashfs image within a VM.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31841 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-23 21:05:19 +00:00
nbd
fb17c4e710
lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31835 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-20 21:58:03 +00:00
nbd
6c09d6b4d8
kernel: merge a net-next fq_codel backlog handling fix
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31813 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 22:12:15 +00:00
juhosg
2d3a55136a
omap24xx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31810 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:22:32 +00:00
juhosg
71f3abe21d
cns3xxx: add support for 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31809 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:53 +00:00
juhosg
2bb56acc0c
linux/2.6.39: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31808 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:51 +00:00
juhosg
2afa505fd1
cns3xxx: sync kernel config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31807 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:48 +00:00
juhosg
197bf733d7
cns3xxx: remove 2.6.39 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31806 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:46 +00:00
juhosg
acd1d54c28
cns3xxx: switch to 3.1
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31805 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:44 +00:00
juhosg
d87b48bbe9
x86: remove support for old kernels
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31804 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:42 +00:00
juhosg
336ab20ec5
x86: remove subtarget specific LINUX_VERSION overrides
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31803 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:38 +00:00
juhosg
e32a177913
x86/ep80579: switch to 3.3
...
Also fix build errors in the ep80579-drivers package.
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31802 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 20:10:33 +00:00
hauke
5ce0dd5cbe
brcm47xx: fix nvram read out on devices with serial flash
...
detect nvram on Linksys E3200
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31790 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 16:04:10 +00:00
hauke
1b9dfb678c
brcm47xx: bcma: fix null pointer
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31789 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:46:30 +00:00
hauke
aa8a1880a1
brcm47xx: ssb: recognize ARM Cortex M3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31788 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:45:51 +00:00
hauke
addb48537a
brcm47xx: some fixes for the USB driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31787 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 15:44:25 +00:00
juhosg
de772a61cc
cobalt: remove 2.6.39 specific patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31785 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:59:22 +00:00
juhosg
f2569ecf09
x86/olpc: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31784 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:32 +00:00
juhosg
8f9cbdeccd
x86: image: select bootscript images by default for OLPC
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31783 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-18 09:57:29 +00:00
nbd
009c4c9327
adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31781 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 21:20:23 +00:00
hauke
a08e2a1c37
kernel: add some missing config options added by r31756
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31774 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:28:30 +00:00
hauke
b1e2eade99
kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31772 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:22:38 +00:00
hauke
c343cde492
brcm47xx: remove support for kernel 3.2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31771 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 13:20:10 +00:00
juhosg
dcea0bf81c
x86/thincan: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31765 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:01 +00:00
juhosg
db081f453b
x86/xen_domu: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31764 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:41:00 +00:00
juhosg
4dcd044429
x86/kvm_guest: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31763 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:58 +00:00
juhosg
5fe6f552d3
x86/generic: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31762 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-17 06:40:56 +00:00
nbd
b3c4d367ce
kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
...
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:
http://queue.acm.org/detail.cfm?id=2209336
Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.
Additionally,
fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.
These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.
Includes updates to codel for better portability and speed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31756 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 15:23:03 +00:00
juhosg
287ab9841e
x86/alix2: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31753 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:45:02 +00:00
juhosg
2b245c96a9
x86/net5501: switch to 3.3
...
Compile tested only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31752 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:59 +00:00
juhosg
3261e9d285
x86: sync 3.3 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31751 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:55 +00:00
juhosg
2075a32be0
x86: sync 3.2 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31750 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:52 +00:00
juhosg
005d04baef
x86: sync 2.6.39 configs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31749 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:49 +00:00
juhosg
7b285c80fb
linux/3.3: add missing symbol
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31748 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-16 10:44:46 +00:00
juhosg
003fb14844
linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
...
It was missing in the previous commit.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31738 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 11:12:31 +00:00
juhosg
5cc763c7b2
linux: move certain disabled symbols to the generic configs
...
* CONFIG_ARCH_DMA_ADDR_T_64BIT
* CONFIG_ARCH_HAS_ILOG2_U32
* CONFIG_ARCH_HAS_ILOG2_U64
* CONFIG_ARCH_PHYS_ADDR_T_64BIT
* CONFIG_ARCH_SUPPORTS_MSI
* CONFIG_GENERIC_CPU_DEVICES
* CONFIG_HWMON_DEBUG_CHIP
* CONFIG_I2C_PXA_PCI
* CONFIG_LEDS_GPIO
* CONFIG_MINIX_FS_NATIVE_ENDIAN
* CONFIG_MLX4_CORE
* CONFIG_POWER_SUPPLY
* CONFIG_POWER_SUPPLY_DEBUG
* CONFIG_QUOTACTL
* CONFIG_SDIO_UART
* CONFIG_SENSORS_K10TEMP
* CONFIG_SENSORS_SCH56XX_COMMON
* CONFIG_SENSORS_VIA_CPUTEMP
* CONFIG_SERIO_AMBAKMI
* CONFIG_SERIO_I8042
* CONFIG_SERIO_LIBPS2
* CONFIG_SERIO_PCIPS2
* CONFIG_SERIO_RAW
* CONFIG_SERIO_SERPORT
* CONFIG_SPI_BITBANG
* CONFIG_SPI_GPIO
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:58:52 +00:00
nbd
82ff0a8569
ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31736 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 10:36:39 +00:00
blogic
6a54667829
[lantiq] code style cleanup of the mach files
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31735 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:05 +00:00
blogic
993c2e232f
[lantiq] adds zyxel p2601hnfx support
...
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31734 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:38:02 +00:00
blogic
5af9c39784
[lantiq] set 3.3.6 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31733 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-15 09:37:59 +00:00
blogic
1fffba2171
[lantiq] set 3.3.5 as default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31718 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 16:11:26 +00:00
juhosg
674c61407c
linux/3.0: R.I.P.
...
It is used by the broken omap35xx/gumstix target only.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31717 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:34 +00:00
juhosg
c7b0f82f36
realview: remove 3.0 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31716 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:32 +00:00
juhosg
fd4e26402c
realview: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31715 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:31 +00:00
juhosg
6b364205d7
realview: add 3.3 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31714 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:29 +00:00
juhosg
96bc3c2734
linux/3.3: more missing config symbols
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31713 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 15:48:23 +00:00
hauke
af5a56a89c
kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31710 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 11:28:02 +00:00
juhosg
298dcd23d1
kernel: update linux 3.3 to 3.3.6
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-14 09:18:32 +00:00
hauke
3ad338f697
amazon: fix section mismatch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31707 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:31:42 +00:00
hauke
c8c0045b91
amazon: update amazon target to kernel 3.3
...
This is just compile tested, my device is currently not working.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31706 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 15:10:40 +00:00
juhosg
501390d552
gemini: remove 2.6.37 support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31700 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:04:04 +00:00
juhosg
1d2df477ff
gemini: switch to 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:04:02 +00:00
juhosg
6a4f0ff0d7
gemini: add support for 3.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31698 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 12:03:59 +00:00
hauke
0b98ffdc6a
brcm47xx: generate image for Linksys WRT610N V1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 00:16:57 +00:00
hauke
05c09e7de4
kernel: ssb: add PCI IDs 0x4322 and 43222
...
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.
This fixes #10887 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31695 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 00:08:12 +00:00
hauke
8297c7ff8b
brcm47xx: fix tg3 ssb patch
...
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31694 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 23:59:12 +00:00
juhosg
d2821676fa
linux/2.6.38: R.I.P.
...
It is used only by the broken coldfire target.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31688 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:21 +00:00
juhosg
4b6fa24c63
linux/2.6.37: R.I.P.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31687 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:19 +00:00
juhosg
faeed4ab57
linux: add broken flag to remaining targets which are using 2.6.37
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31686 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-12 12:05:18 +00:00