qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-25 10:10:37 +02:00
Code
15,387 Commits 13 Branches 0 Tags 117 MiB
58eb7333af
Commit Graph

255 Commits

Author SHA1 Message Date
florian
42dd4ac5f0 Delete old brcm63xx files 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13210 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-11-15 11:21:42 +00:00
juhosg
d8297bb0a4 [kernel] update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches 
* based on a patch by Hauke Mehrtens
 * closes #4193



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13192 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-11-12 17:49:01 +00:00
nico
3ced72e9c7 add missing kconfig symbols for 2.6.27 targets when all modules are enabled 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13178 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-11-11 02:43:35 +00:00
nbd
95c0a2e226 brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13130 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-11-06 12:52:39 +00:00
florian
c4caad4f75 Add basic support for Inventel Liveboxes, resync kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13108 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-11-03 20:30:43 +00:00
florian
8295d48e38 Using CONFIG_MODVERSIONS is a bad idea, disable it and no longer mark brcm63xx as broken 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13106 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-11-03 18:52:58 +00:00
florian
3fadb707e4 Use 2.6.27.4 kernel version 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13055 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-10-28 11:19:24 +00:00
florian
4e471fc847 Update targets to 2.6.27.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13035 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-10-23 09:11:10 +00:00
florian
2e17392bce Update patches and rename board 9 stands for development board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13024 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-10-22 09:20:51 +00:00
florian
33ffd60e66 Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13015 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-10-20 12:55:28 +00:00
florian
5ee9afcc22 New Broadcom BCM63xx codebase, huge thanks to Maxime ;) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13001 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-10-17 22:53:56 +00:00
florian
c2a5ebc6dc Fix reference to the old and replaced kmod-rt61 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12723 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-09-27 10:47:00 +00:00
juhosg
151259743b [kernel] update to 2.6.26.5 and 2.6.25.17 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12718 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-09-26 18:46:53 +00:00
nico
1f74483425 disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable it on targets where USB is supported 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12690 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-09-24 19:28:53 +00:00
juhosg
6795275961 [kernel] update to 2.6.26.3 and 2.6.25.16 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12371 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-08-22 15:37:19 +00:00
juhosg
9c609b5b3b [kernel] update to 2.6.25.15 and 2.6.26.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@12242 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-08-07 16:52:52 +00:00
juhosg
115a129a30 [kernel] update to 2.6.25.12 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11933 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-07-26 10:53:23 +00:00
kaloz
15fb6e6e69 update targets to 2.6.25.10 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11667 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-07-05 16:52:15 +00:00
kaloz
ca231a8331 upgrade to 2.6.25.9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11584 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-26 14:28:16 +00:00
juhosg
ad91de86f5 [kernel] upgrade to 2.6.25.7, and refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11523 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-17 12:57:04 +00:00
kaloz
c4019d34c1 upgrade to 2.6.25.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11435 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-11 11:38:39 +00:00
florian
648c3e4676 Add bcm3350 cpuid 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11364 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-06-05 16:19:46 +00:00
juhosg
a9d0643d17 [brcm63xx] revert kernel version to 2.6.25.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11273 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-27 06:27:16 +00:00
juhosg
f2a91858ac [brcm63xx] refresh kernel patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11201 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-19 08:33:22 +00:00
juhosg
685d811b38 [kernel] upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11184 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 20:12:54 +00:00
nbd
1977b8eebd bcm96345: correct some 6345 specific stuff 
This fixes some problems with the 6345 support and adds a macro for CPU
identification that is easier on the eyes. The first thing it does is to not
initialize MPI on the 6345 as it does not have PCI. The second thing it does is
to use a static value for the CPU frequency of the 6345 chip to provide an
accurate timer.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11183 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:32:16 +00:00
nbd
29a5029bce bcm963xx: fix cfe detection 
The CFE detection failed to account for zero termination.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11182 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:32:05 +00:00
nbd
b70a198f89 bcm963xx: add new timer code 
This basically selects the new generic MIPS timer code for BCM963xx and
simplifies the timer setup code.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11181 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:31:55 +00:00
nbd
b2ce0c07aa bcm963xx: remove obsolete timer code 
This removes some code that has been deprecated in kernels >= 2.6.24.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11180 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:31:45 +00:00
nbd
a03a3970cf bcm963xx: fix uart isr 
The ISR ended up in an endless loop because the TX ISR never got used or masked.
This patch basically makes the TX ISR mask the the TX interrupt when it
encounters it, because it doesn't even use the TX interrupt.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11179 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:31:35 +00:00
nbd
2ff6ff3e54 bcm963xx: rewrite irq handling code 
This patch adds interrupt handling as on AR7. The old code was very messy and
didn't work too well. It also removes the unused file int-handler.S.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11178 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:31:25 +00:00
nbd
741b8902a7 bcm963xx: add missing trailing zero to load address 
The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current
sources. I think this is just a typo, so this patch fixes it (tested on 96345).

Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11177 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:31:11 +00:00
nbd
123751454e bcm963xx: flashmap support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11176 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:31:02 +00:00
nbd
dd88c880ed bcm963xx: serial port support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11175 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:30:49 +00:00
nbd
0fcb7c5182 bcm963xx: board support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11174 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:30:39 +00:00
nbd
baeea7e3b7 bcm963xx: add 2.6.25 configuration file 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11173 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:30:30 +00:00
nbd
61b272ab98 bcm963xx: use the 2.6.25.1 kernel 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11172 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:30:16 +00:00
nbd
8a5477f586 bcm963xx: image generation using image tagger 
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11171 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:30:04 +00:00
nbd
bd6f055e6a bcm963xx: fix load address / kernel entry 
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11169 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-18 17:29:39 +00:00
nico
ab01217894 enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11097 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-05-09 17:08:51 +00:00
kaloz
294a4bb95f upgrade to 2.6.24.5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10959 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-28 10:23:36 +00:00
nico
112eacc155 properly disable CONFIG_CRYPTO_HW 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10952 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-27 12:31:50 +00:00
florian
829e3cf764 Delete config-default file and resync kernel configuration for brcm63xx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10790 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-11 14:22:41 +00:00
florian
4e758fef01 brcm63xx image generation cleanups (#3169) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10703 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-04-01 21:10:47 +00:00
florian
d4e976a36f Upgrade brcm63xx to 2.6.24 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-02-13 17:31:17 +00:00
juhosg
9c8f7fda46 [brcm63xx] resync kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10444 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-02-11 15:28:45 +00:00
kaloz
41ac39db86 upgrade & standardize kernel versions 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10443 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-02-11 10:50:40 +00:00
nbd
6a049752cc fix initramfs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10080 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2008-01-01 21:38:06 +00:00
nbd
f56b55940b make the image filenames a bit shorter 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9533 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-11-10 23:08:11 +00:00
nico
2cd399391e move crypto support to a seperate crypto.mk file, split modules into multiple packages and adjust dependencies, sync crypto options in kconfigs. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8980 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-23 15:12:12 +00:00
nico
937629f197 add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP (closes: #2297, thanks to aorlinsk), sync 2.4 / 2.6 kconfigs. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8955 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-22 18:37:24 +00:00
nbd
de5584e77a clean up jffs2 config options 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-19 20:58:16 +00:00
nbd
ceee90ffd2 adapt profiles for subtarget changes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-08 20:04:43 +00:00
nbd
6db7ad74f6 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8694 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-08 19:55:42 +00:00
nbd
17c7b6c3fd strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles. 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2007-09-06 16:27:37 +00:00