1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-18 05:57:30 +02:00
Commit Graph

19054 Commits

Author SHA1 Message Date
juhosg
dbdef16088 generic: add rtl8366rb switch vlan fid support
Allows to use fids 0 to 7. Default is 0.
Those who will use this don't forget to `set vlan fid` every time
after `set vlan ports` if you want non default behavior.
Minor changes. Version bump.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:21 +00:00
juhosg
d59a23df99 ramips: Use NET_IP_ALIGN instead of hardcoding 2
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:18 +00:00
juhosg
37b545f00f ramips: DMA map the correct RX skb size
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:16 +00:00
juhosg
c523394925 ramips: Don't trigger BUG_ON due to skb allocation failure
Instead just drop the rx'ed frame silently and reuse the already
available buffer.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:12 +00:00
juhosg
e0af17401f ramips: Remove unnecessary skb_put
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24121 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 10:01:08 +00:00
nbd
1e52006d64 uClibc: add back a few cflags that were being overwritten, might fix a few segfauls (thx, framer99)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24120 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-24 00:30:26 +00:00
cshore
97de625a9b [brcm63xx] image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 20:17:08 +00:00
acoul
e79fbe8597 linux/brcm47xx: sync yhe BCM4710 fix with the upcoming upstream patch.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24116 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 16:41:34 +00:00
acoul
ed8ad021b1 linux/generic: add 2.6.37 support for the Cisco 7941/7945 IP phones: http://lkml.org/lkml/2010/11/21/219 (thank you Kevin Cernekee)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24114 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 14:36:15 +00:00
acoul
a7565ddade linux/brcm47xx: add missing patch on r24112
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24113 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 14:12:42 +00:00
acoul
723857f8a7 linux/brcm47xx: Broadcom BCM4710 does not belong in the BMIPS4KC family.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24112 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 14:08:41 +00:00
acoul
d92c081a67 linux/generic: refresh 2.6.37 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24111 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 14:04:42 +00:00
hcg
2f0ecbd629 [gumstix] Fix ext4 build
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 12:07:50 +00:00
hcg
517144faf6 [gumstix] Bump kernel version
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 11:59:03 +00:00
hcg
f6bd632bfc [gumstix] Remove NAND support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 10:16:37 +00:00
nbd
e574442dcc mac80211: improve station mode nullfunc probing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 02:13:54 +00:00
nbd
d3f8066317 e2fsprogs: fix libuuid installation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 21:56:15 +00:00
nbd
56216b699f mac80211: improve ad-hoc multicast rate handling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 19:59:19 +00:00
nbd
705a3eff36 iw: sync nl80211 header to fix the multicast rate setting
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24104 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 19:59:13 +00:00
nbd
cc6edc5c7a use PREFIX/bin instead of PREFIX/sbin for all host builds (fixes e2fsprogs path)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 18:49:18 +00:00
acoul
e521e0fb00 linux/brcm47xx: properly fix r24096
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 18:16:55 +00:00
nbd
030341e663 uClibc: fix ubicom32 compile error with 0.9.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 17:50:08 +00:00
nbd
1f02e71ef2 uClibc: fix headers install on prepare with QUILT=1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24100 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 17:50:01 +00:00
nbd
e6ccee4e6b uClibc: make UCLIBC_HAS_LONG_DOUBLE_MATH generic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24099 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 17:49:51 +00:00
nbd
dfeb463656 ath9k_htc: fix eeprom access breakage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24098 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 17:28:35 +00:00
nbd
14b08b5a91 ath9k: fix key search for a-mpdu on ar9300
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24097 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 17:28:26 +00:00
acoul
19c4f2cb67 linux/brcm47xx: mainline 2.6.37 602977b0d672687909b0cb0542ede134ed6ef858 commit broke CPU revision: 00024000, MIPS (cc 0x805, rev 0x00, vendor
0x4243) functionality. Revert that patch until we get a proper fix.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24096 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 17:17:15 +00:00
acoul
c2edd8cbfc target/linux: sync kernel patches to 2.6.37-rc3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24095 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 16:29:27 +00:00
nbd
81ed0a682f uClibc: fix cris compile on 0.9.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24094 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 16:18:43 +00:00
nbd
f4575b3f11 uClibc: fix compile error on avr32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24093 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 15:14:16 +00:00
nbd
99edd90b17 uClibc: disable nptl on a few targets where it is not supported yet
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24092 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 14:50:33 +00:00
nbd
9fad1d2e0e e2fsprogs: clean up the makefile and install libuuid
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 14:26:06 +00:00
kaloz
9721c62112 cleanup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24090 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 13:46:09 +00:00
kaloz
825f13453e remove 2.6.25 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24089 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 13:43:32 +00:00
kaloz
02028358c7 [coldfire]: remove 2.6.25 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24088 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 13:31:46 +00:00
kaloz
12a0868f92 [coldfire]: 2.6.31 support (WiP)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24087 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 13:29:58 +00:00
kaloz
1f4f86a4e6 fix typos
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24086 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 13:01:21 +00:00
kaloz
d7833103e7 [target/x86]: move x86 back to .32 for now
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24085 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 12:58:31 +00:00
kaloz
0835d732ce switch from ext2 to ext4 (w/o) journaling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 12:12:39 +00:00
kaloz
1823498df7 use ext4 for ext2/3 on 2.6.32+
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24083 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 12:11:50 +00:00
kaloz
d5e6bde258 add 2.6.32 patches to use ext4 for ext2/3
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24082 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 12:03:23 +00:00
kaloz
e71ac4855b [target/x86]: additional Kconfig options for newer kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24081 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 11:34:45 +00:00
kaloz
e1fc4af8c6 [target/x86]: we don't need microcode updates
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24080 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 11:33:25 +00:00
kaloz
3379bcf3fe [package/grub]: add ext4 support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24079 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 11:27:47 +00:00
kaloz
284a3cfc2b [tools]: add e2fsprogs to tools and use that instead of libuuid
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24078 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 11:26:45 +00:00
kaloz
fa101fbdb6 add missing Kconfig symbols
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24077 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 11:03:29 +00:00
nbd
62153c47ad uClibc: 0.9.32 needs the ldso fix as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24074 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 01:48:29 +00:00
nbd
228eb594ae uClibc: update 0.9.32 to latest git
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24073 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-22 00:44:37 +00:00
nbd
fcdd5734fb x86: add missing l1 cache shift change
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24072 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-21 23:27:25 +00:00
nbd
7231ec09a2 x86: turn off CONFIG_X86_GENERIC for geos and net5501
CONFIG_X86_GENERIC obscures CONFIG_MGEODE_LX, etc. and causes it to use wrong cache-line size.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24071 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-21 22:56:33 +00:00