1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-05 05:20:37 +02:00
Commit Graph

24294 Commits

Author SHA1 Message Date
jow
dd97bbee8a mtd - remove partition table assumption when writing fis table
When mtd alters the fis partition table it assumes that the first partition
table entry also is the first logical parition table entry. For instance our
table could look like this (irrelevant partitions put aside):
 * vmlinux.bin.l7 0xA8710000
 * rootfs         0xA8030000
Here mtd would assume vmlinux.bin.l7 being the first partition and use its
address to calculate the size and offset which ultimately leads to a broken
partition table.
This patch alters the behavior by checking what partition has the smaller
address to do the calculations based on that address.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32601 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-04 11:56:25 +00:00
jow
6a288531d7 mtd - add partition offset parameter
The offset parameter can be used to write the data at the offset
instead of writing it to the beginning of the partition.

Signed-off-by: Marek Linder <lindner_marek@yahoo.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32600 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-04 11:37:53 +00:00
nbd
08a9c557e0 ar71xx: update the EW Dorin MTD layout, increase kernel partition size (requested by EW)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32599 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-04 10:55:56 +00:00
thepeople
36f95026ed mac80211: make channel bandwidth setting generic
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32596 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-04 00:25:46 +00:00
thepeople
2b972426d7 commit patch from https://lists.ath5k.org/pipermail/ath5k-devel/2011-November/005043.html, fixed up for newer ath5k and added in more radios.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-04 00:09:18 +00:00
jogo
c94a6d0b71 bcm63xx: bcm63xx-spi does not depend on spi-bitbang
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32594 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:42:17 +00:00
jogo
4f860c88aa bcm63xx: 96348A-122 improvements (Comtrend 5365)
1) Improve WLAN button.
2) Add 96348A-122 image.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:42:15 +00:00
jogo
c60cd5dd54 bcm63xx: fix second caldata address calculation
thanks Noltari for spotting this.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32592 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:42:12 +00:00
jogo
cc1b8fb1cb bcm63xx: update patches to latest upstream versions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32591 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:42:07 +00:00
jogo
5a8d0fdaf3 kernel: generic: spi: allow empty (un)prepare transfer
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:42:03 +00:00
nbd
16ba0265da ath9k: add a patch to make the hw queue length configurable via debugfs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32589 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 21:00:47 +00:00
juhosg
08ec8f0d80 mac80211: add support for AR9550
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32588 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 18:05:04 +00:00
jow
0a5e278435 [package] base-files: ensure that /sys is available during sysupgrade, some essential services like om-watchdog need it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32587 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 15:43:43 +00:00
juhosg
641595b79a ar71xx: improve MDIO busy wait code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32586 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 15:24:02 +00:00
juhosg
db1a0d339e ar71xx: remove the built-in MTD map of the ALL0258N
Pass the mtd_layout via the kernel command line instead.
Also increase the kernel partition size to 1024k, so current kernel can fit in.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32585 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 15:24:01 +00:00
nbd
d4f13972f8 toolchain: sync eglibc headers/build split with uclibc changes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32584 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 14:23:32 +00:00
nbd
4b157f4b59 toolchain: fix libc headers dependency on kernel headers + minimal gcc
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32582 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 10:43:59 +00:00
florian
0ef855fc75 [brcm63xx] refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32581 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-03 09:45:46 +00:00
hauke
bdc39c62ca kernel: ssb/bcma: update to version from wireless-testing tag master-2012-07-02
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32580 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-02 23:12:58 +00:00
jow
9253d87a21 [package] 6to4: fix ifname resolving for adv_interface option (#11796)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-02 12:14:50 +00:00
jow
2bd97dd89a [package] netifd: repair dhcp client id option
Busybox udhcpc dropped support for the -c option, instead it can be emulated by using -x 0x3d:id,
change the dhcp protocol script accordingly and filter all colons from the id while we're at it.
This change supersedes http://patchwork.openwrt.org/patch/1810/

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-01 12:43:14 +00:00
jow
86db0188fa include/image.mk: /tmp should have mode 1777
On the off chance that the root filesystem's /tmp is used directly as a
temporary directory instead of having a tmpfs mounted over it, it should have
the sticky bit set.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32572 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-01 11:48:54 +00:00
jow
8b203dc527 [package] dnsmasq: introduce "add_local_hostname" and "add_local_domain" options
- add_local_domain defaults to 1 and controls whether the local domain is written as search directive to the local resolv.conf
 - add_local_hostname defaults to 1 and controls whether A and PTR records are created automatically for the local hostname
These change supersedes http://patchwork.openwrt.org/patch/2207/ and http://patchwork.openwrt.org/patch/2208/

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32570 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-01 11:32:46 +00:00
jow
3a1e1be03a package/dnsmasq: permit UCI configuration of --dhcp-fqdn option
This adds a new boolean option, fqdn, to the "config dnsmasq" section of
/etc/config/dhcp. The default is off. When set on, it enables the dhcp-fqdn
option to dnsmasq. dhcp-fqdn causes dnsmasq's DNS server to not resolve
unqualifed local hostnames. The "domain" option is required when using "fqdn".
Local hostnames will remain available for lookup using fully-qualified names.

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32569 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-01 11:32:45 +00:00
jow
2caf3c66a2 [PATCH 1/4] package/dnsmasq: permit dhcp_option in global dnsmasq config section
dnsmasq currently permits dhcp_options to be specified only in "config dhcp"
sections of /etc/config/dhcp. When dnsmasq is providing DHCP service for
multiple subnets and there are multiple "config dhcp" sections without "option
ignore", it makes sense to allow dhcp_options that should apply globally in
the "config dnsmasq" section of /etc/config/dhcp. dhcp_option is a list option.

[jow: rework patch to apply after dhcp-option-force handling got introduced]

Signed-off-by: Mark Mentovai <mark@moxienet.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-01 11:32:29 +00:00
jow
b6a1b5d84d Fix extroot by UUID
Extroot works fine when the target device is specified by a path. It fails
however if the device is specified by UUID (the target partition gets mounted
much later by hotplug hooks). This is because the blkid command is no longer
compiled into BusyBox (since changeset [1]) so it's unavailable for the
preinit phase.

The closest bug report I was able to find is [2], although the reporting person
mentions that /tmp/overlay-disabled showed up which wasn't there in my case.

This patch sets PATH and LD_LIBRARY_PATH environment variables so that the
blkid command installed on the target device can be used by that particular
preinit script.

[1] https://dev.openwrt.org/changeset/26245
[2] https://dev.openwrt.org/ticket/10653

Signed-off-by: Jaroslaw Swierczynski <jarek1701@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-01 11:06:32 +00:00
jow
9f93ad9ef0 kernel/modules: load pppol2tp after pppox
l2tp_ppp needs to be loaded after pppox, otherwise it ends up like this:
l2tp_ppp: Unknown symbol pppox_ioctl (err 0)
...
during boot.
I also fixed the dependency, it should be pppox rather than pppoe.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32562 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-01 10:34:45 +00:00
nbd
7b71f99fda config: tag parallel build options with high build breakage probability with a BROKEN dependency to discourage users from spamming us with tickets about them
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32559 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-30 21:44:12 +00:00
nbd
8096c8d9bf uClibc: add -Wno-unused-but-set-variable to get rid of unnecessary warning logspam
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32558 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-30 21:44:09 +00:00
nbd
db73773bde uClibc: split the package into the main directory and the headers/ and utils/ subdirectories to clean up build order and fix quilt support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-30 21:44:05 +00:00
nbd
b284b583be toolchain: fix up lib64 symlink to lib before copying the initial prefix dir to avoid errors on copying
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-30 21:43:59 +00:00
nbd
86e3bacd5a toolchain/uClibc: fix getting the nameserver from _res state after res_init. fixes displaying the nameserver in busybox nslookup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-30 18:12:23 +00:00
nbd
b5d071eb9b toolchain/gcc: fix installing the toolchain after removing the toolchain dir without a full rebuild
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-30 18:12:19 +00:00
nbd
40b6fce4a1 toolchain: keep the initial gcc around for later uclibc rebuilds
testing uclibc changes is tricky because the final gcc tends to miscompile
uclibc code or barf up internal compiler errors.
install binutils into $(TOOLCHAIN_DIR)/initial (without changing the configure
prefix) and copy it from there to $(TOOLCHAIN_DIR)/ so that the initial gcc
can be put into $(PATH) for the uclibc build, even if the final gcc
is already installed.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-30 18:12:15 +00:00
jow
97f0df7a84 [package] base-files: implement network_get_dnsserver() and network_get_dnssearch() in /lib/functions/network.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29 19:04:11 +00:00
nbd
0387092597 ath9k: revert an upstream initval update to fix a rx sensitivity regression on ar9380 (fixes #11756)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32528 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29 17:59:39 +00:00
nbd
f0ebad0e26 eglibc: work around a broken configure test to fix compile errors on x86
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32527 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29 16:19:48 +00:00
jow
79cdadea60 [package] base-files: only consider enabled default routes when finding the wan iface (#11774)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32525 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29 11:58:35 +00:00
jow
b7fcfbf381 [package] netifd: update to current git head, exposes enabled state, mtu and metric overrides for routes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32524 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29 11:42:15 +00:00
florian
a2ed4b34a3 [brcm63xx] fix watchdog and rng drivers section mismatch (#11767)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29 09:07:54 +00:00
nbd
faf197b945 tools: sdcc depends on bison
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-29 00:32:43 +00:00
nbd
7ffed0b52c ar71xx: detect and enable MIPS DSP extensions, AR9344 supports them (fixes #11762)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32520 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-28 16:05:08 +00:00
nbd
7f7b8b4dfb toolchain: enable gdb by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32518 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-28 14:32:11 +00:00
nbd
2ac75aacc1 ath9k: de-duplicate initvals, reduces uncompressed binary size by 24 KB
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32517 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-28 00:34:19 +00:00
nbd
c1c8e3bb46 ath9k: update the ar934x initvals
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-27 22:32:56 +00:00
nbd
3fdee93c55 ath9k: remove the queue length limiting patch, the approach was experimental, not used by default and a different solution is required
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32515 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-27 22:32:51 +00:00
nbd
b6422914a3 kernel: switch openwrt default to TCP cubic from westwood (patch by Dave Täht)
Despite Westwood's theoretical advantages, in nearly
every benchmark we ran last year, TCP cubic won, whether it be
on correct RTT estimates, amount of buffering, responsiveness,
etc. on current hardware and software designs.

(both need timestamps on to work well, besides)

TCP cubic is better maintained and understood than westwood,
also.

While a scenario where westwood would win possibly exists,
there is too much buffering in the wifi stack in particular
at present, to see any improvement.

If you wish to exercise various TCPs under contention,
the current svn head of netperf (2.6) has options to switch
congestion control agorithms on the fly, as does iperf.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-27 22:32:47 +00:00
nbd
126de14e4c base-files: enable TCP timestamps, enable sack/dsack. (patch by Dave Täht)
A year of testing in the cerowrt project shows not using timestamps
to be a very bad idea in nearly any TCP at speeds above a few Mbit.

Lastly sack/dsack help on recovery from larger amounts of packet
loss.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-27 22:32:44 +00:00
florian
a6f7f0aaf2 [brcm63xx] fix SPI clock frequency selection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32512 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-27 22:14:50 +00:00
nbd
1ab7fc1991 ath9k: improve ani behavior during scanning
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32511 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-06-27 12:45:00 +00:00