qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-30 23:16:17 +02:00
Code
23,276 Commits 13 Branches 0 Tags 117 MiB
88a3d8e65f
Commit Graph

470 Commits

Author SHA1 Message Date
juhosg
fe2be6a9a3 kernel: update linux 3.3 to 3.3.5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 20:11:43 +00:00
juhosg
439a47e380 ramips: W306R V2.0 - GPIO and Network fixes 
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 19:17:59 +00:00
juhosg
1f249922ce ramips: Make serial console for DIR-300-B1 work again 
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 19:17:58 +00:00
juhosg
e51f7c5d1b kernel: update linux 3.3 to 3.3.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 08:38:11 +00:00
juhosg
399af78951 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:33 +00:00
jogo
aa09643423 kernel: update linux 3.3 to 3.3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31460 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 09:25:38 +00:00
juhosg
4e19be80f8 ramips: rt305x: add support for the UR-336UN board 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 16:56:06 +00:00
juhosg
06add57343 ramips: rt305x: add support for the Asus WL-330N3G board 
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 16:56:05 +00:00
juhosg
085e737330 ramips: nuke 3.2 suport 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:53 +00:00
juhosg
caef9edf07 ramips: switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31404 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:51 +00:00
juhosg
0f71b77a13 ramips: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31403 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:50 +00:00
juhosg
e958af1110 ramips: rt305x: add OHCI/EHCI registration code for RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31402 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:48 +00:00
juhosg
3ff5d8da9a ramips: rt305x: fix CPU clock detection on RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31401 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:47 +00:00
juhosg
feaef768b3 ramips: rt305x: use different memory size setup for RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31400 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:45 +00:00
juhosg
fe6030a2b7 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31399 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:44 +00:00
juhosg
219147642d ramips: add swconfig to the default package list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31398 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:43 +00:00
juhosg
dbbeae59d9 ramips: build initramfs image for the Fonera 2.0N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31397 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:42 +00:00
juhosg
266880e202 ramips: rt305x: add initial support for Tenda W306R V2.0 
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31396 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:40 +00:00
juhosg
ca5d81b44b ramips: remove hardcoded console parameter from kernel configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:30 +00:00
jogo
86acf4fb40 kernel: also update the targets to use 3.2.15 
Thanks Gabor for spotting it.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-17 13:12:14 +00:00
jogo
bbb153176f kernel: update linux 3.2 to 3.2.14 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31222 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-09 14:48:51 +00:00
jogo
f21c103e5a kernel: update linux 3.2 to 3.2.13 and refresh patches 
Also remove a duplicate patch from lantiq (already in generic).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31158 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-01 07:56:55 +00:00
jow
8600b97ee6 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31144 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-29 16:03:04 +00:00
juhosg
7c8edac25f ramips: rt305x: build image for the DIR-615 rev D boards 
Patch from #10105.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:29:59 +00:00
juhosg
467d4cf199 ramips: rt305x: add add support for the Asus WL-330N board 
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31100 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:29:57 +00:00
juhosg
77ec3b2de9 kernel: update linux 3.2 to 3.2.12 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31028 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 18:23:31 +00:00
juhosg
60c3984e2b ramips: rt305x: add profile for the AZtech HW-5503G board 
Patch from #11085.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30907 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-12 17:29:06 +00:00
juhosg
c74f622197 ramips: add RT3350 detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-12 16:12:13 +00:00
juhosg
6eda38a432 ramips: rt305x: rewrite SoC detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 19:05:59 +00:00
juhosg
2886c1d472 ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_* 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30889 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 19:05:57 +00:00
juhosg
5a2708d192 ramips: replace RALINK_SOC_* macros with global variables 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30888 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 19:05:56 +00:00
juhosg
9fb8ca891c ramips: introduce ramips_soc_prom_init and move SoC detection into that 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30887 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 19:05:53 +00:00
juhosg
46495ea2d9 ramips: build initramfs image for DIR-{3,6}00 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 16:39:31 +00:00
juhosg
cd601754a4 ramips: allow to use DSP ASE on RT3xxx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30879 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 16:39:26 +00:00
juhosg
a88314062b ramips: add support for unbranded XDX-RN502J board 
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:

http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197

http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html

some reports also state the Aceex 22Y uses the same board.

more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878

[juhosg: fix checkpatch warnings, use the GENERIC_4M template]

Signed-off-by: bruno schwander <bruno@tinkerbox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30809 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-04 16:09:13 +00:00
juhosg
6e1646817e ramips: board support for Asus RT-N10+ 
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]

Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30808 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-04 16:09:11 +00:00
juhosg
57b73bf423 kernel: update linux 3.2 to 3.2.9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30767 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-01 19:49:02 +00:00
juhosg
c369186781 ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30733 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-26 10:54:13 +00:00
juhosg
bcc8770afa ramips: raeth: add rx_info structure 
This helps to reduce code size on RX path:

add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12)
function                                     old     new   delta
ramips_eth_open                             1104    1144     +40
ramips_ring_free                             212     232     +20
ramips_eth_stop                              400     408      +8
ramips_eth_rx_hw                             648     592     -56

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30732 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-26 10:54:12 +00:00
juhosg
c3157bd40e ramips: raeth: add tx_info structure 
This helps to reduce code size on TX path:

add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36)
function                                     old     new   delta
ramips_eth_open                             1048    1104     +56
ramips_eth_tx_housekeeping                   156     148      -8
ramips_ring_free                             224     212     -12
ramips_eth_stop                              420     400     -20
ramips_eth_hard_start_xmit                   480     428     -52

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30731 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-26 10:54:10 +00:00
juhosg
b83545fa99 ramips: raeth: don't process disabled interrupts 
Also rename the 'fe_int' variable.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30713 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-25 11:59:19 +00:00
juhosg
86f0a453a3 ramips: fix FONERA20N image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-24 16:18:46 +00:00
juhosg
e59f7e59ce ramips: image: increase minimum kernel partition size to 896k 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:16 +00:00
juhosg
aef9836e3e ramips: image: cleanup and sort templates/profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:15 +00:00
juhosg
3512e35131 ramips: image: use GENERIC_4M template for the ALL0256N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30704 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:14 +00:00
juhosg
3bc6de1a9c ramips: image: introduce mkmtd/{,phys,spi} helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30703 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:12 +00:00
juhosg
8674a3608c ramips: image: pass mtdlayout variables by value 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30702 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:11 +00:00
juhosg
1a418e58fd ramips: image: merge F5D8235V{1,2} templates 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30701 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:10 +00:00
juhosg
2114850f4f ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30700 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:07 +00:00
juhosg
de6db64de9 ramips: image: introduce mkcmdline helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:06 +00:00