qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-28 05:35:21 +02:00
Code
24,473 Commits 13 Branches 0 Tags 117 MiB
c4723d07e6
Commit Graph

525 Commits

Author SHA1 Message Date
juhosg
530802ba69 kernel: update linux 3.3 to 3.3.7 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31848 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:32 +00:00
juhosg
4a1bbe457a ramips: Add byte queue limits support to net/ethernet/ramips_main.c 
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31844 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:23 +00:00
juhosg
7d9b449118 ramips: Enable sysupgrade for Sitecom WL-351 
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31843 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-23 21:05:22 +00:00
juhosg
5cc763c7b2 linux: move certain disabled symbols to the generic configs 
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31737 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-15 10:58:52 +00:00
juhosg
298dcd23d1 kernel: update linux 3.3 to 3.3.6 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31709 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-14 09:18:32 +00:00
juhosg
fe2be6a9a3 kernel: update linux 3.3 to 3.3.5 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31645 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-07 20:11:43 +00:00
juhosg
439a47e380 ramips: W306R V2.0 - GPIO and Network fixes 
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31557 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 19:17:59 +00:00
juhosg
1f249922ce ramips: Make serial console for DIR-300-B1 work again 
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-05-02 19:17:58 +00:00
juhosg
e51f7c5d1b kernel: update linux 3.3 to 3.3.4 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31541 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-30 08:38:11 +00:00
juhosg
399af78951 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31507 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-29 07:36:33 +00:00
jogo
aa09643423 kernel: update linux 3.3 to 3.3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31460 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-24 09:25:38 +00:00
juhosg
4e19be80f8 ramips: rt305x: add support for the UR-336UN board 
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31451 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 16:56:06 +00:00
juhosg
06add57343 ramips: rt305x: add support for the Asus WL-330N3G board 
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31450 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-23 16:56:05 +00:00
juhosg
085e737330 ramips: nuke 3.2 suport 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31405 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:53 +00:00
juhosg
caef9edf07 ramips: switch to 3.3.2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31404 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:51 +00:00
juhosg
0f71b77a13 ramips: add support for 3.3 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31403 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:50 +00:00
juhosg
e958af1110 ramips: rt305x: add OHCI/EHCI registration code for RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31402 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:48 +00:00
juhosg
3ff5d8da9a ramips: rt305x: fix CPU clock detection on RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31401 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:47 +00:00
juhosg
feaef768b3 ramips: rt305x: use different memory size setup for RT3352 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31400 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:45 +00:00
juhosg
fe6030a2b7 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31399 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:44 +00:00
juhosg
219147642d ramips: add swconfig to the default package list 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31398 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:43 +00:00
juhosg
dbbeae59d9 ramips: build initramfs image for the Fonera 2.0N 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31397 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:42 +00:00
juhosg
266880e202 ramips: rt305x: add initial support for Tenda W306R V2.0 
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31396 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:40 +00:00
juhosg
ca5d81b44b ramips: remove hardcoded console parameter from kernel configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31395 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-21 12:30:30 +00:00
jogo
86acf4fb40 kernel: also update the targets to use 3.2.15 
Thanks Gabor for spotting it.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31337 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-17 13:12:14 +00:00
jogo
bbb153176f kernel: update linux 3.2 to 3.2.14 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31222 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-09 14:48:51 +00:00
jogo
f21c103e5a kernel: update linux 3.2 to 3.2.13 and refresh patches 
Also remove a duplicate patch from lantiq (already in generic).

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31158 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-04-01 07:56:55 +00:00
jow
8600b97ee6 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31144 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-29 16:03:04 +00:00
juhosg
7c8edac25f ramips: rt305x: build image for the DIR-615 rev D boards 
Patch from #10105.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31101 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:29:59 +00:00
juhosg
467d4cf199 ramips: rt305x: add add support for the Asus WL-330N board 
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31100 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-27 19:29:57 +00:00
juhosg
77ec3b2de9 kernel: update linux 3.2 to 3.2.12 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31028 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-19 18:23:31 +00:00
juhosg
60c3984e2b ramips: rt305x: add profile for the AZtech HW-5503G board 
Patch from #11085.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30907 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-12 17:29:06 +00:00
juhosg
c74f622197 ramips: add RT3350 detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30900 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-12 16:12:13 +00:00
juhosg
6eda38a432 ramips: rt305x: rewrite SoC detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30890 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 19:05:59 +00:00
juhosg
2886c1d472 ramips: rt305x: rename SYSTEM_CONFIG_* defines to RT305X_SYSCFG_* 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30889 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 19:05:57 +00:00
juhosg
5a2708d192 ramips: replace RALINK_SOC_* macros with global variables 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30888 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 19:05:56 +00:00
juhosg
9fb8ca891c ramips: introduce ramips_soc_prom_init and move SoC detection into that 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30887 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 19:05:53 +00:00
juhosg
46495ea2d9 ramips: build initramfs image for DIR-{3,6}00 boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30882 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 16:39:31 +00:00
juhosg
cd601754a4 ramips: allow to use DSP ASE on RT3xxx 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30879 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-11 16:39:26 +00:00
juhosg
a88314062b ramips: add support for unbranded XDX-RN502J board 
This patch adds support for routers using a PCB marked XDX-RN502J
V2.0, such as some unbranded routers like this:

http://www.mediafire.com/?8acv87h6snn9fj6
http://www.mediafire.com/?do7xonw7scor4kn
http://www.mediafire.com/?1ad49zvx3e7jyix
http://www.mediafire.com/?i46cqiq66maa197

http://www.aliexpress.com/product-fm/516397994-Free-Shipping-300M-3G-WAN-Wireless-N-WiFi-USB-AP-Router-2-Antennas-wholesalers.html

some reports also state the Aceex 22Y uses the same board.

more information can be found in the following openwrt forum post
https://forum.openwrt.org/viewtopic.php?id=34878

[juhosg: fix checkpatch warnings, use the GENERIC_4M template]

Signed-off-by: bruno schwander <bruno@tinkerbox.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30809 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-04 16:09:13 +00:00
juhosg
6e1646817e ramips: board support for Asus RT-N10+ 
[juhosg: fix indentation in platform scripts, and remove debug
messages from 06_set_iface_mac]

Signed-off-by: Patrick van Staveren <trick@vanstaveren.us>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30808 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-04 16:09:11 +00:00
juhosg
57b73bf423 kernel: update linux 3.2 to 3.2.9 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30767 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-03-01 19:49:02 +00:00
juhosg
c369186781 ramips: don't read RAMIPS_RX_CALC_IDX0 register in the loop 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30733 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-26 10:54:13 +00:00
juhosg
bcc8770afa ramips: raeth: add rx_info structure 
This helps to reduce code size on RX path:

add/remove: 0/0 grow/shrink: 3/1 up/down: 68/-56 (12)
function                                     old     new   delta
ramips_eth_open                             1104    1144     +40
ramips_ring_free                             212     232     +20
ramips_eth_stop                              400     408      +8
ramips_eth_rx_hw                             648     592     -56

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30732 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-26 10:54:12 +00:00
juhosg
c3157bd40e ramips: raeth: add tx_info structure 
This helps to reduce code size on TX path:

add/remove: 0/0 grow/shrink: 1/4 up/down: 56/-92 (-36)
function                                     old     new   delta
ramips_eth_open                             1048    1104     +56
ramips_eth_tx_housekeeping                   156     148      -8
ramips_ring_free                             224     212     -12
ramips_eth_stop                              420     400     -20
ramips_eth_hard_start_xmit                   480     428     -52

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30731 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-26 10:54:10 +00:00
juhosg
b83545fa99 ramips: raeth: don't process disabled interrupts 
Also rename the 'fe_int' variable.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30713 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-25 11:59:19 +00:00
juhosg
86f0a453a3 ramips: fix FONERA20N image generation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30710 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-24 16:18:46 +00:00
juhosg
e59f7e59ce ramips: image: increase minimum kernel partition size to 896k 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30706 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:16 +00:00
juhosg
aef9836e3e ramips: image: cleanup and sort templates/profiles 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30705 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:15 +00:00
juhosg
3512e35131 ramips: image: use GENERIC_4M template for the ALL0256N board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30704 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:14 +00:00
juhosg
3bc6de1a9c ramips: image: introduce mkmtd/{,phys,spi} helpers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30703 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:12 +00:00
juhosg
8674a3608c ramips: image: pass mtdlayout variables by value 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30702 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:11 +00:00
juhosg
1a418e58fd ramips: image: merge F5D8235V{1,2} templates 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30701 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:10 +00:00
juhosg
2114850f4f ramips: image: use generic template for the WR6202, OMNIEMB, W502U boards 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30700 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:07 +00:00
juhosg
de6db64de9 ramips: image: introduce mkcmdline helper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30699 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:06 +00:00
juhosg
c329c451b2 ramips: image: use the GENERIC_4M template for the V11ST-FE board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30698 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:04 +00:00
juhosg
550d82fa19 ramips: image: simplify Makefile a bit 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30697 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:03 +00:00
juhosg
77394481fe ramips: image: add MkImageLzma wrapper 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30696 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:02 +00:00
juhosg
eada36fe53 ramips: image: allow to build board specific initramfs images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30695 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-23 19:58:01 +00:00
juhosg
f8f3c2b274 ramips: merge identical switch configuration entries 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30688 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-22 19:46:19 +00:00
juhosg
180721623a ramips: use unified switch identifiers in uci-defaults/network 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30687 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-22 19:46:17 +00:00
juhosg
88c727bd85 ramips: fix VLAN config of the RT-N15 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30686 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-22 19:46:15 +00:00
juhosg
edd0b0744e ramips: raeth: show interrupt statistics in debugfs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30681 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-22 13:06:44 +00:00
juhosg
fe2aef1465 ramips: raeth: add debugfs support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30680 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-22 13:06:42 +00:00
juhosg
487e30dc6b ramips: raeth: rename main source file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30679 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-22 13:06:41 +00:00
juhosg
8b52220866 ramips: raeth: add missing Kconfig and Makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30671 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-21 09:44:30 +00:00
juhosg
3ac2b4e29a ramips: move the ethernet driver into a separate directory 
Also clean up the Kconfig symbols.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30670 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-21 09:26:43 +00:00
juhosg
d7185880b9 ramips: rename the spi driver 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30669 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-21 09:26:41 +00:00
juhosg
342ac43e68 ramips: rt3883: make rt3883_nand_data visible 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30655 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-19 19:40:37 +00:00
juhosg
5b5e6922c6 ramips: merge 3.2 fixes 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30652 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-19 17:52:23 +00:00
juhosg
5e8b0f2f94 ramips: nuke 2.6.39 support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30651 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-19 17:52:20 +00:00
juhosg
e1527acc5f ramips: rt305x: nuke built-in MTD partition maps 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30650 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-19 17:52:15 +00:00
juhosg
058c28d6fe ramips: rt288x: nuke built-in MTD partition maps 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30649 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-19 17:52:11 +00:00
juhosg
68d60e45f2 ramips: build sysupgrade image for the V11ST-FE board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30648 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-19 17:52:08 +00:00
juhosg
f6ba1d4f8c ramips: rt305x: add support for the Skyline SL-R7205 Wireless 3G router 
[juhosg:
- don't switch back to 2.6.39
- update config-3.2
- change machine id to SL-R7205
- reorder case entries in platform scripts
- remove button hotplug script]

Signed-off-by: Haipoh Teoh <hpteoh@ceedtec.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30645 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-19 16:44:49 +00:00
juhosg
7005c79799 ralink: rt3883: disable the 2GHz band on the RT-N56U 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30632 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-18 17:36:21 +00:00
juhosg
78d0623f6c ramips: rt3883: make rt3883_wlan_data visible 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30631 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-18 17:36:16 +00:00
juhosg
c2da468a0c ramips: extract eeprom for the built-in wlan module on the RT-N56U 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30604 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 20:06:22 +00:00
juhosg
37f21ebf4d ramips: rt3883: change eeprom file name 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30603 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 20:06:21 +00:00
juhosg
50f7b22bd7 ramips: select HW_HAS_PCI on per-board basis 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30576 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 08:17:54 +00:00
juhosg
9e8e8b51d6 ramips: rt3883: remove a stray character from rt3883.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30575 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 08:17:53 +00:00
juhosg
d81767c119 ramips: rt288x: don't register the PCI controller on each board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30574 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 08:17:52 +00:00
juhosg
013dc5a5d6 ramips: raeth: separate ring allocation and setup 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30573 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-16 08:17:50 +00:00
juhosg
6660855cb6 ramips: rt288x: fix PCI resource conflict 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30563 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 21:19:02 +00:00
florian
5ad3941a70 [ramips] correct PCI IO/Mem resource swapping 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30562 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 21:13:21 +00:00
florian
62c0190fa5 [ramips] add Ralink V11ST-FE board support 
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30561 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 21:13:11 +00:00
juhosg
43d6f57e67 ramips: raeth: add a helper function for skb allocation 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 18:33:42 +00:00
juhosg
c99c1bd913 ramips: raeth: use netdev_alloc_skb 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 18:33:41 +00:00
juhosg
0564ef75aa ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures 
This helps GCC to generare more efficient code.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30553 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 18:33:40 +00:00
juhosg
eaae1ec1de ramips: raeth: use 're' instead of 'priv' everywhere 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30552 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 18:33:38 +00:00
juhosg
d0794e0d35 ramips: raeth: force link down in ramips_phy_stop 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30550 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 13:47:52 +00:00
juhosg
815334db9c ramips: raeth: serialize ramips_link_adjust calls 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 13:47:50 +00:00
juhosg
d214321c8c ramips: raeth: add PHYLIB support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-15 06:47:12 +00:00
juhosg
d54a0c39e1 ramips: extract eeprom for the PCIe wlan module on the RT-N56U 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:45 +00:00
juhosg
073aa05f36 ramips: rt3883: enable PCI on the RT-N56U board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:44 +00:00
juhosg
0dad89e259 ramips: rt3883: add PCI support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:42 +00:00
juhosg
34acde8e5f ramips: rt3883: sync 2.6.39 config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:41 +00:00
juhosg
5775cc2b9c ramips: use SoC specific irq.h 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-14 17:32:40 +00:00
juhosg
e95d1bebf7 ramips: rt3883: update package list in the default profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:18:05 +00:00
juhosg
2223374185 ramips: add preliminary support for the Asus RT-N56U board 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-02-13 15:18:04 +00:00