- fix ip6tables rules when icmp_type option is set
- add "family" option to zones, forwardings, redirects and rules to selectively apply rules to iptables and/or ip6tables
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21508 3c298f89-4303-0410-b956-a3cf2f4a3e73
- partially revert r21486, start firewall on init again
- skip iface hotplug events if base fw is not up yet
- get ifname and up state with uci_get_state() in iface setup
since the values gathered by scan_interfaces() may be outdated
when iface coldplugging happens (observed with pptp)
- ignore up state when bringing down interfaces because ifdown
reverts state vars before dispatching the iface event
- bump package revision
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21502 3c298f89-4303-0410-b956-a3cf2f4a3e73
This fixup was introduced in r11812 to correct settings for devices only showing 16MB RAM instead of 128MB.
That killed devices with 128MB RAM.
Now value is *set* 0x0009 and not ored.
The value is only corrected if it has less than 32 MB Ram.
This should fix the last problem in #3177
Thank you b.sander for the patch.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21497 3c298f89-4303-0410-b956-a3cf2f4a3e73
- improve rdate reliability
- make rdate config more ntp like
- move time server list to /etc/config/timeserver
- bump package revision
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21495 3c298f89-4303-0410-b956-a3cf2f4a3e73
- defer firewall start until the first interface is brought up by hotplug, fixes race conditions on slow devices
- create a file lock during firewall start and wait for it in hotplug events, prevents race conditions between start and addif
- start firewall actions in background from hotplug handler since the firewall itself fires further hotplug events which results in a deadlock if not forked off
- get loaded state direcly from the uci binary since updated value is not recognized by config_get after uci_set_state
- bump package revision to r2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21486 3c298f89-4303-0410-b956-a3cf2f4a3e73
* adds support for speedport w502V
* bump kernel to 2.6.33.4
* make ethernet be configurable as MII/RMII
* on xway we now assign a static amount of cp1 ram (still need to find a
sane value)
* remove bogus board.c
* jiffies were running with a (1 << 2) multiplier
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21485 3c298f89-4303-0410-b956-a3cf2f4a3e73
Before this patch CONFIG_SSB_BLOCKIO was set to y in compat-wireless
but the in kernel ssb system had it set to n, this causes an invalid pointer.
b43 now needs CONFIG_SSB_BLOCKIO=y
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21449 3c298f89-4303-0410-b956-a3cf2f4a3e73
Adding NBG460N/550N/550NH boards to mkzynfw.
Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21446 3c298f89-4303-0410-b956-a3cf2f4a3e73
The test if a file can fit in an image considers the current offset
twice. So a image that would fit is too big.
Thanks-to: Michael Kurz <michi.kurz@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21445 3c298f89-4303-0410-b956-a3cf2f4a3e73
wget2nand didnt check the exit status after copying the kernel, if the
copying failed for some reason ( for example not enougs space on the
kernel partition) it simply continued extracting the rootfs.
I also changed the filename, which wget2nand trys to download (
.tar.gz instead of .tgz ).
Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21444 3c298f89-4303-0410-b956-a3cf2f4a3e73
This fixes the NBG460N/550N/550NH mtd partitions.
Signed-off-by: Michael Kurz <michi.kurz@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21443 3c298f89-4303-0410-b956-a3cf2f4a3e73
There is no zlib project on Sourceforge, zlib files are in libpng project
Signed-off-by: Gilles Espinasse g.esp@free.fr
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21442 3c298f89-4303-0410-b956-a3cf2f4a3e73
