qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-24 21:47:42 +02:00
Code
24,465 Commits 13 Branches 0 Tags 117 MiB
ee1a7a743e
Commit Graph

9931 Commits

Author SHA1 Message Date
florian
ee1a7a743e [kernel] backport the upstream entropy changes (#11951) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33559 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-26 12:54:01 +00:00
florian
62bcd38cc3 [targets] get rid of the IRQF_SAMPLE_RANDOM flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33558 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-26 12:53:58 +00:00
florian
237dcc5119 [mcs814x] add wmbus-repeater to the dLAN USB Extender profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33556 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 20:56:50 +00:00
florian
e47c1f32bb [mcs814x] enable multicast and advanced ip routers configs 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33555 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 20:53:34 +00:00
florian
9b1b55700d [mcs814x] add kmod-usb-serial-ftdi to the dLAN USB Extender profile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33554 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 20:50:20 +00:00
blogic
01886f51dd [ramips] make uci-defaults switch detection work on rt5350 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:47:18 +00:00
blogic
e9a777ed10 [ramips] add ethernet support for rt5350 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:47:08 +00:00
blogic
90960d25b1 [ramips] make ramips ethernet use a register mapping table 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:46:58 +00:00
hauke
98837afb76 [brcm47xx]: activate failsafe on all ports of the switch and not just port 0. 
Sometimes the port 0 was the WAN port or there could be some device 
where the port 0 is not wired to an actual Ethernet port. Now telnet in 
failsafe will listen on all ports of the switch so user do not have to 
search for the correct port any more. This change will make the switch 
leak traffic between the WAN and the LAN port, but you should not use 
failsafe while connected to a untrusted network.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 14:04:59 +00:00
juhosg
a23e652340 ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards 
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed  from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:41 +00:00
juhosg
417602ac1e ar71xx: automatically find WLAN calibration data on TEW-673GRU 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:40 +00:00
juhosg
bb4a32bb81 ar71xx: automatically find WLAN calibration data on DIR-825-B1 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:57:38 +00:00
juhosg
39348acc10 ar71xx: add missing backslash to uci-defaults/leds (closes #12240) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33537 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 12:49:43 +00:00
blogic
ba6ee81454 [ramips] unbreak port mapping detection 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-25 09:51:48 +00:00
juhosg
a7bf55a712 ar71xx: use different machtype and setup for the TL-MR3040 
Should fix #12211. Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-24 18:45:56 +00:00
nbd
476060c78a x86: avoid using grub prepare when using grub2 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33525 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-23 09:59:56 +00:00
nbd
9fab9ffb98 x86-generic: enable a few more common kernel options/drivers 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33516 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 23:29:20 +00:00
nbd
02074f1f37 kernel: increase log buffer size 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33515 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 23:10:42 +00:00
nbd
5e6024e9f9 x86: enable usb storage support for the generic subtarget to support booting from usb devices 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33514 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 21:15:59 +00:00
nbd
e2b0f224fb x86: add support for building grub2 images 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33513 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 20:10:42 +00:00
nbd
e3c123c82b x86: split generic image building into a separate script 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33511 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 20:10:35 +00:00
nbd
ea979190c1 x86: rename gen_image_x86.sh to gen_image_grub.sh 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33510 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 20:10:31 +00:00
nbd
cc4fec07c7 cns3xxx: fix ethernet driver tx completion and queue stop/start 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33504 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 00:34:53 +00:00
nbd
ddbfaa46f7 cns3xxx: implement ethernet fraglist tx support for improved bridging performance with jumbo frames 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33503 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-22 00:34:49 +00:00
kaloz
e3342242df [cns3xxx]: move gpio stuff into the right file 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33502 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 05:40:04 +00:00
kaloz
053d207b3c [generic/3.3]: refresh patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33501 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 05:38:16 +00:00
nbd
42b2ad0d3b cns3xxx: add a small optimization for rx offload 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33500 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 00:13:12 +00:00
nbd
9097df315e cns3xxx: fix ethernet port lookup for multi-descriptor jumbo frames 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33499 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-21 00:13:08 +00:00
nbd
1a638ea9ad cns3xxx: fix ethernet packet alignment issues (hw has an alignment requirement of 64), fix skb fragment chaining 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33498 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-20 20:27:18 +00:00
nbd
6c383cf512 kernel: enable perf events when enabling profiling, fixes oprofile on arm 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33497 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-20 20:27:14 +00:00
hauke
beb93dd4a3 [brcm47xx]: deactivate mips wait instruction for MIPS 74K on Broadcom SoCs 
When not removing support for the wait instruction, when ruining on the 
BCM4706 SoC the system stops after msleep() without an exception. I 
haven't seen this problem on the other Broadcom SoCs with a 74K CPU, 
but in the Broadcom SDK it is deactivated for all CPUs of this type.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33496 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-20 14:51:57 +00:00
nbd
7abd95f8ec cns3xxx: remove the broken flag 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33493 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:25 +00:00
nbd
2f58535c56 cns3xxx: fix kernel config 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33492 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:22 +00:00
nbd
bae52cf056 cns3xxx: fix ethernet jumbo-frame support, use single-page rx buffers and skb fragment lists 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33491 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:18 +00:00
nbd
c206ff5a5d cns3xxx: fix ethernet tx checksum offload 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33490 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:15 +00:00
nbd
7cb76ea6ab cns3xxx: merge ethernet driver changes from gateworks 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33489 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:12 +00:00
nbd
2a134ef25a cns3xxx: build images for the old boot loader and the new one (default to the new one) 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33488 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:09 +00:00
nbd
d6c5497a48 cns3xxx: fix the ethernet driver makefile 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33487 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:06 +00:00
nbd
d898c2926f cns3xxx: reorganize patches, fix pcie io space init order 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33486 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:50:02 +00:00
nbd
21cd9bc80a cns3xxx: move virtual io addresses to vmalloc space to fix kernel BUG() calls 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33485 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:49:58 +00:00
nbd
77da9ae1d3 cns3xxx: add missing callbacks for the laguna machine support 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33484 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 23:49:50 +00:00
florian
b385661768 brcm47xx/profiles/PS-1208MFG: remove reference to non-existing package 
The package block-hotplug doesn't exist, refer to block-mount instead.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33474 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 15:13:33 +00:00
florian
5714253063 omap24xx/profiles/n810: remove reference to non-existing package 
The package block-hotplug doesn't exist, removing reference to it.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33473 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 15:13:30 +00:00
hauke
49bdd0278a [brcm47xx]: update fix-boot patch. 
Do not change the code any more but use the kconfig options


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33463 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 10:18:36 +00:00
hauke
11e47465cc [brcm47xx]: update gpio patches 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33462 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-19 10:17:51 +00:00
juhosg
484998f83f ar71xx: fix a typo in TEW-637GRU image names 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33460 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-18 14:32:25 +00:00
juhosg
0cfc5d05b3 ar71xx: revert DIR-825-B1 wholeflash image support. 
It should be implemmented in a cleaner way.

This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33459 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-18 14:30:57 +00:00
florian
b079ac667f [realview] disable VFPv4 probing 
This will make the kernel crash on systems using qemu < 1.1.0. Until fixed
disable VPFv4 capability probing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33458 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-18 10:00:56 +00:00
florian
d68d56b155 [realview] partially revert r33403 
The target CFLAGS were also accidentally changed

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33457 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-18 10:00:46 +00:00
juhosg
a384f7bf1b ar71xx: register the NAND flash controller device on DB120 
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33455 3c298f89-4303-0410-b956-a3cf2f4a3e73
 2012-09-17 20:30:57 +00:00