nbd
2ca2cb6c37
ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-22 05:43:53 +00:00
jogo
c5ceea4e34
ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
...
Thanks netprince for reporting and testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 19:32:40 +00:00
jow
674429b24f
[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id ( #10649 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-21 01:27:48 +00:00
hauke
84d175a3f2
brcm47xx: remove patch starting adding brcm4716 to ssb
...
brcm4716 is supported by bcma now we do not need this patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:55:20 +00:00
hauke
9da7868465
brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
...
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:39:13 +00:00
hauke
a604d7454c
kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:33:03 +00:00
hauke
84ddb1a863
brcm47xx: remove support for kernel 2.6.39
...
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 23:26:15 +00:00
nbd
eaf9c95caf
ar71xx: add missing wireless led changes for wzr-hp-g300nh2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-19 09:04:15 +00:00
nbd
cdf64b5cdc
ar71xx: add support for the wzr-hp-g300nh2
...
Signed-off-by: Mark Deneen <mdeneen@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-18 22:20:17 +00:00
juhosg
c0f6abcdc6
ar71xx: use 64kraw template on more TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-17 18:49:55 +00:00
juhosg
12930c3272
ar71xx: connect GMAC0 to the internal switch on DB120
...
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:38 +00:00
juhosg
ba50354437
ar71xx: add defines for the AR934X GMAC interface
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:36 +00:00
juhosg
a55b188ebe
ar71xx: fix GMAC1 interface speed on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:35 +00:00
juhosg
8e8e3fdde7
ar71xx: ag71xx: fix switch port setup for AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:32 +00:00
juhosg
07d1bcb923
ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:30 +00:00
juhosg
cb5f456a33
ar71xx: ag71xx: setup switch interface mode on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:29 +00:00
juhosg
f97a00297e
ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:28 +00:00
juhosg
e61b2d1ed9
ar71xx: allow to attach the internal switch for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:22 +00:00
juhosg
812763d48e
ar71xx: introduce ar71xx_switch_data
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:25:11 +00:00
juhosg
867f0fa967
ar71xx: build images for TL-WR741N/ND v2
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:48 +00:00
juhosg
60c6b42122
ar71x: use raw squashfs images for TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:46 +00:00
juhosg
6c3fe396cd
ar71xx: create a template for using unpadded squashfs images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:45 +00:00
juhosg
f2945360c1
ar71xx: put squash image right after the kernel on TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:44 +00:00
juhosg
57705b7a08
ar71xx: tplinkpart: allow to detect JFFS2 as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 22:03:40 +00:00
juhosg
08d268c8a7
ar71xx: ag71xx: check PHY IDs before accessing the switch registers
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:23 +00:00
juhosg
a82d9221c9
ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:21 +00:00
juhosg
ba116ade9e
ar71xx: ag71xx: nuke ar7240sw_init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:20 +00:00
juhosg
803afe6e40
ar71xx: fix mac addresses on jjPlus devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-15 13:25:18 +00:00
juhosg
032d881496
ar71xx: build image for the Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:11 +00:00
juhosg
d8f4833329
ar71xx: add support for ALFA Network's Hornet-UB board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:10 +00:00
juhosg
33334db9dc
ar71xx: add GPIO function bit defines for AR933X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:54:07 +00:00
juhosg
2b913567e8
ramips: add support for Omnima MiniEMBWiFi board
...
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:51:26 +00:00
nbd
5841748e56
ar71xx: fix gpio count for ar7241/ar7242
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:47:24 +00:00
nbd
75bbe95c04
ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:21:42 +00:00
nbd
dcf5cd5fc2
ath9k: add support for registering extra leds connected to the wmac gpio lines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29530 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-14 20:21:36 +00:00
juhosg
8b3380fefc
ar71xx: get rid of squashfs-4k images
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 20:41:24 +00:00
juhosg
05535c2766
generic: disable 'small sector' erase in m25p80 driver
...
This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29521 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 20:41:22 +00:00
nbd
340372534c
kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 15:14:59 +00:00
nbd
e7bf9d2f6d
ar71xx: fix wireless led on wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 15:00:43 +00:00
juhosg
17595c4da2
ar71xx: enable AR9341 support at setup.c
...
Patch-by: dyq <729650915@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 14:59:43 +00:00
juhosg
6caa8876b2
ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
...
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.
The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.
I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 14:59:40 +00:00
nbd
ec66b62afa
ar71xx: add gpios and usb for wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-13 13:33:44 +00:00
juhosg
1e26277d1e
ar71xx: use RedBoot parser on PB44
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-11 15:52:47 +00:00
blogic
6e7fe5572c
[atheros] convert to gpiolib
...
Signed-off-by: karlp@tweak.net.au
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29486 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-09 07:52:10 +00:00
juhosg
aa54ff79a0
ar71xx: fix WNDR3x00 factory image generation
...
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.
This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29473 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-07 06:55:50 +00:00
juhosg
e310d5b786
ar71xx: fix WNDR3x00 model detection
...
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.
r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.
I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29472 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-07 06:55:39 +00:00
juhosg
9de4cb5314
ramips: fix mac addresses on the DIR-300/600 boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29471 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 20:06:08 +00:00
jogo
87cb2a5585
linux: update 3.1 to 3.1.4
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29470 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 19:50:30 +00:00
jogo
9556c47348
linux: update 3.0 to 3.0.12
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29469 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 19:50:25 +00:00
juhosg
56124f8782
ar71xx: create firmware image for the TL-WR740N/ND v4 boards
...
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29468 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 16:26:44 +00:00
juhosg
a00ddbec78
ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29467 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 16:26:43 +00:00
juhosg
8e71900eeb
ar71xx: fix TL-MR3x20 profile names in image/Makefile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29463 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 13:53:21 +00:00
juhosg
05a6361449
ar71xx: cleanup TP-Link profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29461 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-06 10:29:25 +00:00
juhosg
ae0a750c4b
ar71xx: add TP-Link board detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29459 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 21:11:01 +00:00
juhosg
99997320ea
ar71xx: use correct mac on the lan interface on several TP-LINK devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 21:10:58 +00:00
juhosg
a97fd90341
ar71xx: allow to pass negative offset values for ar71xx_init_mac
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 21:10:55 +00:00
juhosg
097436bca8
ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 18:21:15 +00:00
juhosg
f6ab961f67
ar71xx: verify hardware id of firmware images on TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29455 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 18:11:51 +00:00
juhosg
6f27fcc4b0
ramips: set mac addresses for the NBG-419N
...
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29454 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:07 +00:00
juhosg
0a03c64116
ramips: set preinit interface mac on the hw550-3g board
...
Based on a patch by Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29453 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:06 +00:00
juhosg
d7a5a32c17
ramips: use ramips_get_mac_* functions in the preinit script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29452 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:04 +00:00
juhosg
e595553be8
ramips: move ramips_get_mac_* functions to lib/ramips.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29451 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:03 +00:00
juhosg
5db41b5518
ramips: add ramips_ prefix to get_mac_{binary,nvram} functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29450 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 17:27:02 +00:00
juhosg
8b0e381068
ramips: fix network configuration setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29448 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 16:54:48 +00:00
juhosg
baf6222ae5
ar71xx: reclaim some unused space on TP-Link boards
...
With the default OpenWrt configuration, this increases the size
of the rootfs_data partition by 384KB/128KB on the older/newer
TP-Link models.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29447 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:36 +00:00
juhosg
35606f14a3
ar71xx: check squashfs signature in TP-Link mtd parser
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29446 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:33 +00:00
juhosg
7b716ce3ec
ar71xx: use the lzma-loader on TP-Link boards w/o lzma support
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29444 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:28 +00:00
juhosg
057c5990c9
ar71xx: add lzma loader
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29443 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:52:25 +00:00
nbd
c1679af6b3
ar71xx: add preliminary support for wzr-hp-g450h
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29441 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:20:51 +00:00
nbd
f684eb2454
ar71xx: move multi-m25p80 concat code from wzr-hp-ag300h mach code to dev-m25p80.c, other buffalo routers use it as well
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29440 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 14:20:44 +00:00
juhosg
44a7438217
ar71xx: rewrite WNDR3700/3800 handling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29434 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 13:03:54 +00:00
jow
62f688b6ec
[ar71xx] add some missing wndr3800 base-files definitions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 12:56:21 +00:00
juhosg
1f7d4ca407
ar71xx: change user-space board detection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29432 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 12:56:20 +00:00
juhosg
71573bb739
ar71xx: allow WNDR3700 image creation to fail if kernel/rootfs too big
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29431 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-05 12:47:53 +00:00
juhosg
974654e8c5
ramips: fix argus board rootfs size
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29422 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-04 15:24:57 +00:00
juhosg
11a837ce02
ar71xx: use the tp-link parser on the tp-link boards
...
Also remove static partition maps.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29416 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:31 +00:00
juhosg
17c2fb2fc8
ar71xx: add mtd partition parser for the TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29415 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:27 +00:00
juhosg
37a46ae9f4
ar71xx: run the RedBoot parser only on the RedBoot based boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29414 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:25 +00:00
juhosg
23c921bb91
ar71xx: run the MyLoader parser only on the WP543 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29413 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:23 +00:00
juhosg
4dbb6eef31
ar71xx: run the wrt160nl parser only on the WRT160NL board
...
Also remove static mtd partition definitions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29412 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:20 +00:00
juhosg
8c130c871f
ar71xx: allow to pass part_probe types to the m25p80 driver
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29411 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 18:13:18 +00:00
juhosg
4a763a41d3
ar71xx: create initramfs images for the newer TP-Link boards
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29410 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 16:57:23 +00:00
juhosg
3a0d11139d
ar71xx: remove swconfig and wpad-mini from custom profiles
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29408 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 16:33:41 +00:00
juhosg
1a3e21a48d
ar71xx: add uboot-envtools to the default package list
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29407 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 16:33:40 +00:00
juhosg
7d80e1897f
ar71xx: reclaim unused space in WNDR3700/3800 images
...
Patch by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29406 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-03 16:33:38 +00:00
juhosg
f688ec4123
ar71xx: add a profile and build image for the OM2P board
...
[juhosg: the name of the final image has been changed to
'openwrt-ar71xx-generic-om2p-squashfs-factory.bin']
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29397 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:49:05 +00:00
juhosg
41d8ed17e0
ar71xx: add support for Ubiquiti AirRouter
...
Signed-off-by: Gergely Barta <gergely.barta@printerfairkft.hu>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29395 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:49:02 +00:00
juhosg
8d3dba5fca
ar71xx: configure default led behavior for the OM2P
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29394 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:59 +00:00
juhosg
216fce04c3
ramips: enable sysupgrade on the RT-N15 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:58 +00:00
juhosg
a24e101ea6
ramips: wrap long line in platform upgrade script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29392 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:57 +00:00
juhosg
7a1df0165f
ramips: add profile for the Asus RT-N15
...
This uses previously submitted rtl8366 kernel packages.
[juhosg: The kmod-gpio-dev package has been removed from the package list.]
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29391 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:55 +00:00
juhosg
3c681484c2
ramips: setup default network configuration for RT-N15
...
Based on a patch by Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29390 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:54 +00:00
juhosg
53a1653b16
ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profile
...
It is needed by the RT-N15 board.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29389 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:53 +00:00
juhosg
52d2b347d2
ramips: remove default network configuration, and generate that from uci-defaults
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29387 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:51 +00:00
juhosg
a0f4e5c8de
ramips: use /lib/functions/uci-defaults.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29386 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:48 +00:00
juhosg
2a4fea0542
ar71xx: use /lib/functions/uci-defaults.sh
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29385 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:47 +00:00
juhosg
0c608fa18a
ramips: simplify uci-defaults/network script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29383 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:45 +00:00
juhosg
a77cc3e6c0
ramips: setup mac and network interfaces from separate functions
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29382 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:43 +00:00
juhosg
bee289fa27
ramips: fix Asus RT-N15 board support
...
Fix Asus RT-N15 flash partitions and make an image.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29381 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:42 +00:00
juhosg
fc0b7d945e
ramips: Sparklan wcr-150gn board fixes
...
* Fix partition sizes.
* Add buttons and leds.
* Register usb.
* Remove unnecessary stuff from image Makefile
* Fix rt2x00 eeprom extract.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29380 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:41 +00:00
juhosg
dbcdc67e0e
ramips: fix package name of kmod-input-gpio-buttons
...
Based on a patch from Omnima Limited.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29379 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:39 +00:00
juhosg
63abf5ef7d
ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29378 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:38 +00:00
juhosg
1fe43c4a68
ramips: setup bc2 mac addresses from the generic network script
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29377 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:37 +00:00
juhosg
f9f721e5ba
ramips: combine network setup for all boards in one file
...
Inspired by the patch from Roman Yeryomin. Thanks, Roman!
This removes unnecessary duplication and simplifies network setup for new
boards. It would be a one line change most likely.
[juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards
in order to avoid regression]
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29376 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-12-01 22:48:35 +00:00
blogic
cb73b00a8f
omap24xx: bump to 3.1.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29349 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-28 12:46:18 +00:00
blogic
e179d6ac25
lantiq: bump to 3.1.3
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29348 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-28 10:22:58 +00:00
nico
db98388370
targets: fix CONFIG_USB_STORAGE_* inconsistency
...
* all options were switched from bool to tristate in 2.6.30
* add/change/move them to generic, disabled by default
* remove extinct CONFIG_USB_STORAGE_DPCM dropped in 2.6.29, merged with CONFIG_USB_STORAGE_SDDR09
* remove extinct CONFIG_USB_STORAGE_SIERRA option in 2.6
* cleanup ordering
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29337 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-25 20:47:44 +00:00
juhosg
e6638f1bd3
ar71xx: modify phy mask of the WP543 board
...
This fixes ethernet on newer boards. Based on a patch from #9702 .
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29328 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:43 +00:00
juhosg
4baa5f5378
ar71xx: fix wndr3800 machine name
...
This fixes the machine name in /proc/cpuinfo and luci status page machine name.
Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29326 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:38 +00:00
juhosg
31fef29134
ar71xx: copy atheros initramfs images to the image directory
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29325 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:35 +00:00
juhosg
1427b1d16a
ar71xx: specify mtd layout in command line for the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29324 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-24 20:09:32 +00:00
blogic
d60e82238b
lantiq: drop 009-MIPS-make-oprofile-use-cp0_perfcount_irq-if-it-is-se.patch
...
This patch is/was a duplicate of generic/patches-3.1/307-mips_oprofile_fix.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29294 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-23 12:22:15 +00:00
blogic
bdfc7e8894
lantiq:
...
* fixes ath5k eeprom handling
* fixes sx76x
* adds sx76x to userland api
* minor style cleanups
Signed-of-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29292 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-22 18:50:51 +00:00
florian
9f67405758
[brcm63xx] don't package gpioctl by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29288 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-21 16:36:39 +00:00
nico
90143b9cd2
target/uml: export atomic64_* functions on 32-bit x86
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29287 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-21 14:28:33 +00:00
juhosg
74bada8592
ar71xx: set GE0 phy_mask for AR933x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29274 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-20 11:30:10 +00:00
jow
9ffbe98bd5
[brcm63xx] fix D-Link DSL-2650U image generation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-19 21:34:51 +00:00
jogo
fff36017cf
linux: update 3.0 to 3.0.9
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-19 18:39:12 +00:00
florian
caca8eaab1
[brcm63xx] build images for D-Link DSL-2650U ( #9003 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-18 10:37:03 +00:00
mb
9460bebd64
omap24xx: Fix cbus nested IRQ acking
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29237 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 22:31:27 +00:00
mb
8a2f3bb99b
omap24xx: Fix initialization of software IRQ mask
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29236 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 21:02:00 +00:00
mb
4130c70e12
omap24xx: Update 3.1 config
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29234 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 19:35:57 +00:00
mb
23c1db706e
omap24xx: Some retu/tahvo IRQ fixes
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29233 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 18:06:19 +00:00
mb
fd34842997
omap24xx: Add basic kexec fixes.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29232 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-17 14:57:34 +00:00
mb
53a62e28c0
omap24xx: Add workaround for omapfb locking bug.
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29201 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-16 22:34:38 +00:00
mb
5fa3b37006
Revert r29193
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29195 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-16 19:03:23 +00:00
mb
bfa3523244
omap24xx: Set platform specific optimization flags
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29194 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-16 19:02:12 +00:00
mb
fa3d2d4445
n810: Add xmodmap to profile
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29193 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-16 19:01:19 +00:00
florian
f2c319545c
[rdc] include bridge and 8021q modules by default
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29164 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 22:24:22 +00:00
blogic
5df57010b8
lantiq: add runtime generation of /etc/config/network
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29161 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-15 18:21:00 +00:00
blogic
8b1ffd8dab
lantiq: fix falcon build breakage
...
dev-wifi-rt2x00 fails to build on falcon due to missing pci
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29129 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 18:55:58 +00:00
juhosg
2ba51b8c17
ar71xx: fix USB LED on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29126 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:15 +00:00
juhosg
8f09b983e5
ar71xx: add a function for selecting output signal on a given GPIO pin
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:14 +00:00
juhosg
95684215c0
ar71xx: fix GPIO function handling on AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29124 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:13 +00:00
juhosg
73b96446ee
ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:11 +00:00
juhosg
d9b73ec674
ar71xx: merge nand scan patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29122 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 17:43:10 +00:00
juhosg
b9c4475b88
ar71xx: fix a compiler warning
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29110 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 13:07:47 +00:00
juhosg
e8a5cbc660
ar71xx: fix GPIO count for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29109 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 13:07:45 +00:00
juhosg
2f0405019f
ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29108 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:53 +00:00
juhosg
c86a746ece
ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:51 +00:00
juhosg
c6f1eddcdf
ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29106 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:49 +00:00
juhosg
de73b57f12
ar71xx: add an irq parameter for ar724x_pcibios_init
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29105 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 11:49:47 +00:00
juhosg
1937a07a4e
ar71xx: remove hardwired interface parameters from mach-* files
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29103 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:09 +00:00
juhosg
2b0cd69920
ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29102 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:07 +00:00
juhosg
7f6b8dc9f4
ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29101 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-14 07:38:05 +00:00
florian
5c52fb2bb6
[brcm63xx] build images for Pirelli A226M ( #10409 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:22 +00:00
florian
3b6e0584f5
[brcm63xx] register uart0 on DWV-S0 boards ( #10409 )
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29044 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:18 +00:00
florian
6916a71abc
[kernel] refresh 3.0 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29043 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:14 +00:00
florian
dee25761b4
[kernel] refresh 2.6.39 patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29042 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:10 +00:00
florian
48f5336885
[brcm63xx] rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29041 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 19:19:05 +00:00
florian
209699c72b
[rdc] fix typo, load ip17xx switch module
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29039 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 18:41:26 +00:00
juhosg
f0f8408f20
ar71xx: enable has_gbit flag on AR724{0,1}
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29026 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 17:36:36 +00:00
juhosg
5e68925d9a
ar71xx: fixup onboard PCIe chip registration on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29022 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 12:48:03 +00:00
juhosg
cf53375340
ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29021 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 12:48:01 +00:00
juhosg
3095cc8090
ar71xx: ag71xx: add support for getting switch port link status
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29017 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:04 +00:00
juhosg
7ea3800d31
ar71xx: remove mii_ctrl resources of the ethernet devices
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29016 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:03 +00:00
juhosg
451654dc3a
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:01 +00:00
juhosg
749767a552
ar71xx: ag71xx: remove unused mii_cfg related functions and defines
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29014 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:27:00 +00:00
juhosg
228681e328
ar71xx: set MII interface speed from the set_speed callbacks
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:59 +00:00
juhosg
7571fae3ab
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
...
Also rename the corresponding callback functions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:57 +00:00
juhosg
95d3699b73
ar71xx: ag71xx: remove MII interface setup code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:56 +00:00
juhosg
13e0098939
ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:54 +00:00
juhosg
4cc612872a
ar71xx: fix occasional kernel hangs during boot on AR934x
...
The patch taken from the linux-mips mailing list.
The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.
This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:52 +00:00
juhosg
5fb5b4483b
ar71xx: refresh kernel patches
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29008 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 11:26:51 +00:00
jogo
85ec5ce98d
linux: update 3.1 to 3.1.1
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29007 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 10:48:05 +00:00
blogic
e5c40dc4c3
lantiq: add uci-defaults code for handling leds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:40:21 +00:00
blogic
bddadbe32b
lantiq: add /lib/lantiq.sh and make hotplug handlers use it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:40:16 +00:00
blogic
a8be2afd85
lantiq: rename leds
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29002 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:40:12 +00:00
blogic
14ec28a2a3
lantiq: split compat headers out of bsp header patch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29001 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:40:07 +00:00
blogic
98bf7b355b
lantiq: adds hotplug handler for loading rt2x00 firmware
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29000 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:40:01 +00:00
blogic
1efd56db6c
lantiq: adds hotplug handler for handling buttons and makes w303v work with it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28999 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:39:56 +00:00
blogic
4919aff42f
lantiq: cleanup default package selection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28998 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 23:39:51 +00:00
blogic
2c1120a3b3
lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 18:41:15 +00:00
juhosg
9394e4a065
kernel: ar8216: add support for the AR8236 switch
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28993 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 14:09:52 +00:00
juhosg
63898b07cc
kernel: ar8216: move port vlan setup into a separate function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28992 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 14:09:50 +00:00
juhosg
0999f2be56
ar71xx: use the button for WPS control on the DB120
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28990 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:20 +00:00
juhosg
69a4e7ba6a
ar71xx: register the second ethernet interface on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28989 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:19 +00:00
juhosg
f42393b3c6
ar71xx: implement SoC specific phy interface setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28988 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:18 +00:00
juhosg
428566d3de
ar71xx: move phy interface setup into a separate function
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28987 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:50:16 +00:00
juhosg
9c2632e5aa
ar71xx: register both MDIO bus on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28986 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:59 +00:00
juhosg
8255c166fd
ar71xx: add AR934X specific MDIO registration code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28985 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:56 +00:00
juhosg
79bc01d085
ar71xx: add a secondary mdio bus
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28984 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:54 +00:00
juhosg
4e5c6e94da
ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28983 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:50 +00:00
juhosg
f20b056795
ar71xx: add an id argument to ar71xx_add_device_mdio
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:48 +00:00
juhosg
7d1b33ecbd
ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28981 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 12:09:42 +00:00
juhosg
1553f9eabd
ar71xx: add AR934x specific USB setup
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28980 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:20 +00:00
juhosg
5f0b41bae5
ar71xx: register the first ethernet interface on the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28979 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:18 +00:00
juhosg
8a3f26299d
ar71xx: allow to register ethernet interfaces for AR934X
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28978 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:17 +00:00
juhosg
3cd36281d9
ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28977 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:16 +00:00
juhosg
a1f5559837
ar71xx: add AR934X specific bootstrap and reset register bits
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28976 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:15 +00:00
juhosg
a3d2129487
ar71xx: add diag support for the DB120 board
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28975 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:10 +00:00
juhosg
bb977eb73b
ar71xx: fix GPIO direction setup for AR934x
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28974 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:09 +00:00
juhosg
1d1240855a
ar71xx: fix AR934X clock frequency calculation
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28973 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:08 +00:00
juhosg
b780360c45
ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
...
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28971 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-12 10:54:04 +00:00
blogic
409ee4a226
lantiq: improve falcon package selection
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28962 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-11 21:59:11 +00:00
blogic
79a88f017c
lantiq: fix breakage introduced in 3.1 bump
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-11 21:59:01 +00:00
jow
329ee765ee
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28933 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-10 12:16:41 +00:00
jogo
4ef5b94744
target: linux: mtd: fix MTDREFRESH to an arbitrary high number
...
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.
Also make mtd use the in-kernel mtd headers.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-09 21:16:36 +00:00
nbd
33f4cde7a9
ar71xx: remove dead code
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28851 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-08 00:33:20 +00:00
nbd
4677737b0a
ar71xx: on ar7240, exclude ports from their own port vlan destination mask
...
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-08 00:33:15 +00:00